Show patches with: Submitter = Stanislaw Gruszka       |   111 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
wifi: rt2x00: make watchdog param per device wifi: rt2x00: make watchdog param per device - - 1 --- 2023-11-26 Stanislaw Gruszka kvalo Accepted
MAINTAINERS: drop Helmut Schaa from rt2x00 maintener list MAINTAINERS: drop Helmut Schaa from rt2x00 maintener list - - - --- 2023-10-19 Stanislaw Gruszka kvalo Accepted
[6.0] wifi: iwlegacy: 4965: corrected fix for potential off-by-one overflow in il4965_rs_fill_link_… [6.0] wifi: iwlegacy: 4965: corrected fix for potential off-by-one overflow in il4965_rs_fill_link_… - - - --- 2022-08-15 Stanislaw Gruszka kvalo Accepted
rt2x00: do not mark device gone on EPROTO errors during start rt2x00: do not mark device gone on EPROTO errors during start - - - --- 2021-11-11 Stanislaw Gruszka kvalo Accepted
rt2x00: do not set timestamp for injected frames rt2x00: do not set timestamp for injected frames - - 2 --- 2021-05-04 Stanislaw Gruszka kvalo Accepted
rt2800usb: add Sweex LW163V2 id's rt2800usb: add Sweex LW163V2 id's - - - --- 2021-02-04 Stanislaw Gruszka kvalo Accepted
usb, xhci, rt2800usb: do not perform Soft Retry usb, xhci, rt2800usb: do not perform Soft Retry - - - --- 2021-01-22 Stanislaw Gruszka kvalo Not Applicable
iwl4965: do not process non-QOS frames on txq->sched_retry path iwl4965: do not process non-QOS frames on txq->sched_retry path - - - --- 2021-01-19 Stanislaw Gruszka kvalo Accepted
[5.10] mt76: usb: fix crash on device removal [5.10] mt76: usb: fix crash on device removal 1 - - --- 2020-11-26 Stanislaw Gruszka kvalo Accepted
[v3] rt2x00: save survey for every channel visited [v3] rt2x00: save survey for every channel visited - - - --- 2020-11-04 Stanislaw Gruszka kvalo Accepted
rt2x00: remove unused variable in rt2800_get_survey rt2x00: remove unused variable in rt2800_get_survey - - - --- 2020-11-04 Stanislaw Gruszka kvalo Changes Requested
[v2] MAINTAINERS: change Gruszka's email address [v2] MAINTAINERS: change Gruszka's email address - - - --- 2019-12-19 Stanislaw Gruszka kvalo Accepted
rt2x00: fix rfkill regression on rt2500pci - - - --- 2014-06-16 Stanislaw Gruszka Not Applicable
rtl8187: fix regression on MIPS without coherent DMA - - - --- 2014-02-10 Stanislaw Gruszka Not Applicable
PROBLEM: skb_push called from rt2x00 panics occasionally - - - --- 2014-01-30 Stanislaw Gruszka Not Applicable
[rt2x00-users,rt2x00usb] sleeping function called from invalid context at kernel/locking/mutex.c:616 - - - --- 2014-01-04 Stanislaw Gruszka Not Applicable
[3.12] rt2x00: check if device is still available on rt2x00mac_flush() - - - --- 2013-10-15 Stanislaw Gruszka Not Applicable
[3.12] rt2400pci: fix RSSI read - - - --- 2013-10-15 Stanislaw Gruszka Not Applicable
rt2x00: do not pause queue on flush - - - --- 2013-10-05 Stanislaw Gruszka Not Applicable
[3.11] rt2x00: fix stop queue - - - --- 2013-07-28 Stanislaw Gruszka Not Applicable
[32/32] rt2800: move 53xx specific bbp initialization - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[31/32] rt2800: move 3290 specific bbp initialization - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[30/32] rt2800: move 3352 specific bbp initialization - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[29/32] rt2800: initialize BBP_R108 on proper subroutines - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[28/32] rt2800: initialize BBP_R104 on 3352 subroutine - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[27/32] rt2800: initialize BBP_R134 & BBP_R135 on 53xx subroutine - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[26/32] rt2800: initialize BBP_R128 on proper subroutines - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[25/32] rt2800: initialize BBP_R120 on 3352 subroutine - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[24/32] rt2800: initialize BBP_R106 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[23/32] rt2800: initialize BBP_R105 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[22/32] rt2800: initialize BBP_R104 on proper subroutines - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[21/32] rt2800: initialize BBP_R103 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[20/32] rt2800: move initialization of BBP_95 & BBP_98 to 53xx subroutine - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[19/32] rt2800: initialize BBP_R92 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[18/32] rt2800: initialize BBP_R91 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[17/32] rt2800: initialize BBP_R88 on proper subroutines - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[16/32] rt2800: initialize BBP_R86 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[15/32] rt2800: initialize BBP_R84 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[14/32] rt2800: initialize BBP_R83 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[13/32] rt2800: initialize BBP_R82 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[12/32] rt2800: initialize BBP_R74 - BBP_R80 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[11/32] rt2800: initialize BBP_R70 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[10/32] rt2800: initialize BBP_R69 - BBP_R77 on proper subroutines - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[09/32] rt2800: initialize BBP_R68 on proper subroutines - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[08/32] rt2800: initialize BBP_R65 & BBP_R66 on all subroutines (except 5592) - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[07/32] rt2800: initialize BBP_R47 on 3352 subroutine - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[06/32] rt2800: initialize BBP_R31 on proper subroutines - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[05/32] rt2800: move rt2800_bbp4_mac_if_ctrl to proper subroutines - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[04/32] rt2800: move 3352 bbp specific code - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[03/32] rt2800: add rt2800_init_bbp_305x_soc subroutine - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[02/32] rt2800: prepare for rt2800_init_bbp spit - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[01/32] rt2800: make rt2800_init_bbp return void - - - --- 2013-05-18 Stanislaw Gruszka Not Applicable
[2/2] rt2800: nulify all last words of TXWI - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[1/2] rt2x00: provide separate information about TXWI & RXWI sizes - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,11/11] rt2800: cleanup rt2800_init_rfcsr - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,10/11] rt2800: add rt2800_normal_mode_setup_3xxx subroutine - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,09/11] rt2800: add rt2800_led_open_drain_enable subroutine - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,08/11] rt2800: move RF_R27 setup to individual rfcsr init subroutines - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,07/11] rt2800: add rt2800_rx_filter_calibration procedure - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,06/11] rt2800: move RFCSR6_R2 & LDO_CFG0 setup to 3572 specific rfcsr init - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,05/11] rt2800: move GPIO_SWITCH setup to 3390 specific rfcsr init - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,04/11] rt2800: move 30xx common rf init code - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,03/11] rt2800: move RFCSR29_RSSI_GAIN to 3290 specific rfcsr init - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,02/11] rt2800: move rf init calibration code - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[v2,01/11] rt2800: merge 5xxx normal mode setup - - - --- 2013-04-17 Stanislaw Gruszka Not Applicable
[11/11] rt2800: cleanup rt2800_init_rfcsr - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[10/11] rt2800: add rt2800_normal_mode_setup_3xxx subroutine - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[09/11] rt2800: add rt2800_led_open_drain_enable subroutine - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[08/11] rt2800: move RF_R27 setup to individual rfcsr init subroutines - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[07/11] rt2800: add rt2800_rx_filter_calibration procedure - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[06/11] rt2800: move RFCSR6_R2 & LDO_CFG0 setup to 3572 specific rfcsr init - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[05/11] rt2800: move GPIO_SWITCH setup to 3390 specific rfcsr init - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[04/11] rt2800: move 30xx common rf init code - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[03/11] rt2800: move RFCSR29_RSSI_GAIN to 3290 specific rfcsr init - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[02/11] rt2800: move rf init calibration code - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[01/11] rt2800: merge 5xxx normal mode setup - - - --- 2013-04-09 Stanislaw Gruszka Not Applicable
[25/25] rt2800: 5592: add more USB devices IDs - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[24/25] rt2800: 5592: iq calibration for 5GHz - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[23/25] rt2800: 5592: add Kconfig - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[22/25] rt2800: 5592: TXWI & RXWI descriptors size - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[21/25] rt2800: 5592: add chip specific vgc calculations - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[20/25] rt2800: 5592: add AGC init - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[19/25] rt2800: add write_with_rx_chain function - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[18/25] rt2800: rearrange bbp/rfcsr initialization - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[17/25] rt2800: 5592: add iq calibration - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[16/25] rt2800: 5592: more channel switch registers settings (BBP & GLRT) - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[15/25] rt2800: 5592: enable rf init - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[14/25] rt2800: 5592: setup LDO_CFG0 when configuring channel - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[13/25] rt2800: 5592: init frequency calibration - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[12/25] rt2800: 5592: initialize RF_38/39/30 registers - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[11/25] rt2800: 5592: initialize BBP_R138 register - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[10/25] rt2800: 5592: initalize BBP_R103 register on new revisions - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[09/25] rt2800: 5592: initalize RF_R27 on older revisions - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[08/25] rt2800: 5592: RF early registers initialization - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[07/25] rt2800: 5592: common BBP initialization - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[06/25] rt2800: 5592: BBP registers initialization - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[05/25] rt2800: 5592: MAC registers initalization - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[04/25] rt2800: 5592: channel config stub - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[03/25] rt2800: 5592: add channels table - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
[02/25] rt2800: 5592: early defines - - - --- 2013-03-16 Stanislaw Gruszka Not Applicable
« 1 2 »