diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
index 6116b54..60819bc 100644
--- a/drivers/net/wireless/orinoco/Kconfig
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -132,3 +132,10 @@ config PCMCIA_SPECTRUM
 	  This driver requires firmware download on startup.  Utilities
 	  for downloading Symbol firmware are available at
 	  <http://sourceforge.net/projects/orinoco/>
+
+config ORINOCO_USB
+	tristate "Agere Orinoco USB support"
+	depends on USB && HERMES
+	select FW_LOADER
+	---help---
+	  This driver is for USB versions of the Agere Orinoco card.
diff --git a/drivers/net/wireless/orinoco/Makefile b/drivers/net/wireless/orinoco/Makefile
index e645269..bfdefb8 100644
--- a/drivers/net/wireless/orinoco/Makefile
+++ b/drivers/net/wireless/orinoco/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_PCI_HERMES)	+= orinoco_pci.o
 obj-$(CONFIG_TMD_HERMES)	+= orinoco_tmd.o
 obj-$(CONFIG_NORTEL_HERMES)	+= orinoco_nortel.o
 obj-$(CONFIG_PCMCIA_SPECTRUM)	+= spectrum_cs.o
+obj-$(CONFIG_ORINOCO_USB)	+= orinoco_usb.o
 
 # Orinoco should be endian clean.
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h
index 9e21ecd..aed14ff 100644
--- a/drivers/net/wireless/orinoco/hermes.h
+++ b/drivers/net/wireless/orinoco/hermes.h
@@ -407,6 +407,7 @@ typedef struct hermes {
 #define HERMES_32BIT_REGSPACING	1
 	u16 inten; /* Which interrupts should be enabled? */
 	const struct hermes_ops *ops;
+	void *priv;
 } hermes_t;
 
 /* Register access convenience macros */
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 78a210d..1d60c7e 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -798,7 +798,7 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid,
 	stats->rx_dropped++;
 }
 
-static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
+void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	struct net_device_stats *stats = &priv->stats;
@@ -919,6 +919,7 @@ update_stats:
 out:
 	kfree(desc);
 }
+EXPORT_SYMBOL(__orinoco_ev_rx);
 
 static void orinoco_rx(struct net_device *dev,
 		       struct hermes_rx_descriptor *desc,
@@ -1360,7 +1361,7 @@ static void orinoco_process_scan_results(struct work_struct *work)
 	spin_unlock_irqrestore(&priv->scan_lock, flags);
 }
 
-static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
+void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 {
 	struct orinoco_private *priv = ndev_priv(dev);
 	u16 infofid;
@@ -1578,6 +1579,7 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
 
 	return;
 }
+EXPORT_SYMBOL(__orinoco_ev_info);
 
 static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
 {
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index 80a1386..e9f415a 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -197,6 +197,9 @@ extern int orinoco_up(struct orinoco_private *priv);
 extern void orinoco_down(struct orinoco_private *priv);
 extern irqreturn_t orinoco_interrupt(int irq, void *dev_id);
 
+extern void __orinoco_ev_info(struct net_device *dev, hermes_t *hw);
+extern void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw);
+
 /* Common ndo functions exported for reuse by orinoco_usb */
 int orinoco_open(struct net_device *dev);
 int orinoco_stop(struct net_device *dev);
diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c
new file mode 100644
index 0000000..ce0069d
--- /dev/null
+++ b/drivers/net/wireless/orinoco/orinoco_usb.c
@@ -0,0 +1,1680 @@
+/*
+ * USB Orinoco driver
+ *
+ * Copyright (c) 2003 Manuel Estrada Sainz
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above.  If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL.  If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ *
+ * Queueing code based on linux-wlan-ng 0.2.1-pre5
+ *
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc.  All Rights Reserved.
+ *
+ *	The license is the same as above.
+ *
+ * Initialy based on USB Skeleton driver - 0.7
+ *
+ * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of
+ *	the License, or (at your option) any later version.
+ *
+ * NOTE: The original USB Skeleton driver is GPL, but all that code is
+ * gone so MPL/GPL applies.
+ */
+
+#define DRIVER_NAME "orinoco_usb"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/fcntl.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/smp_lock.h>
+#include <linux/usb.h>
+#include <linux/timer.h>
+
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+#include <linux/firmware.h>
+
+#include "orinoco.h"
+
+#ifndef URB_ASYNC_UNLINK
+#define URB_ASYNC_UNLINK 0
+#endif
+
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+#define ENCAPS_OVERHEAD		(sizeof(encaps_hdr) + 2)
+
+struct header_struct {
+	/* 802.3 */
+	u8 dest[ETH_ALEN];
+	u8 src[ETH_ALEN];
+	__be16 len;
+	/* 802.2 */
+	u8 dsap;
+	u8 ssap;
+	u8 ctrl;
+	/* SNAP */
+	u8 oui[3];
+	__be16 ethertype;
+} __attribute__ ((packed));
+
+struct ez_usb_fw {
+	u16 size;
+	const u8 *code;
+};
+
+static struct ez_usb_fw firmware = {
+	.size = 0,
+	.code = NULL,
+};
+
+#ifdef CONFIG_USB_DEBUG
+static int debug = 1;
+#else
+static int debug;
+#endif
+
+/* Debugging macros */
+#undef dbg
+#define dbg(format, arg...) \
+	do { if (debug) printk(KERN_DEBUG PFX "%s: " format "\n", \
+			       __func__ , ## arg); } while (0)
+#undef err
+#define err(format, arg...) \
+	do { printk(KERN_ERR PFX format "\n", ## arg); } while (0)
+
+/* Module paramaters */
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug enabled or not");
+
+MODULE_FIRMWARE("orinoco_ezusb_fw");
+
+/*
+ * Under some conditions, the card gets stuck and stops paying attention
+ * to the world (i.e. data communication stalls) until we do something to
+ * it.  Sending an INQ_TALLIES command seems to be enough and should be
+ * harmless otherwise.  This behaviour has been observed when using the
+ * driver on a systemimager client during installation.  In the past a
+ * timer was used to send INQ_TALLIES commands when there was no other
+ * activity, but it was troublesome and was removed.
+ */
+
+#define USB_COMPAQ_VENDOR_ID     0x049f /* Compaq Computer Corp. */
+#define USB_COMPAQ_WL215_ID      0x001f /* Compaq WL215 USB Adapter */
+#define USB_COMPAQ_W200_ID       0x0076 /* Compaq W200 USB Adapter */
+#define USB_HP_WL215_ID          0x0082 /* Compaq WL215 USB Adapter */
+
+#define USB_MELCO_VENDOR_ID      0x0411
+#define USB_BUFFALO_L11_ID       0x0006 /* BUFFALO WLI-USB-L11 */
+#define USB_BUFFALO_L11G_WR_ID   0x000B /* BUFFALO WLI-USB-L11G-WR */
+#define USB_BUFFALO_L11G_ID      0x000D /* BUFFALO WLI-USB-L11G */
+
+#define USB_LUCENT_VENDOR_ID     0x047E /* Lucent Technologies */
+#define USB_LUCENT_ORINOCO_ID    0x0300 /* Lucent/Agere Orinoco USB Client */
+
+#define USB_AVAYA8_VENDOR_ID     0x0D98
+#define USB_AVAYAE_VENDOR_ID     0x0D9E
+#define USB_AVAYA_WIRELESS_ID    0x0300 /* Avaya Wireless USB Card */
+
+#define USB_AGERE_VENDOR_ID      0x0D4E /* Agere Systems */
+#define USB_AGERE_MODEL0801_ID   0x1000 /* Wireless USB Card Model 0801 */
+#define USB_AGERE_MODEL0802_ID   0x1001 /* Wireless USB Card Model 0802 */
+#define USB_AGERE_REBRANDED_ID   0x047A /* WLAN USB Card */
+
+#define USB_ELSA_VENDOR_ID       0x05CC
+#define USB_ELSA_AIRLANCER_ID    0x3100 /* ELSA AirLancer USB-11 */
+
+#define USB_LEGEND_VENDOR_ID     0x0E7C
+#define USB_LEGEND_JOYNET_ID     0x0300 /* Joynet WLAN USB Card */
+
+#define USB_SAMSUNG_VENDOR_ID    0x04E8
+#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */
+#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */
+#define USB_SAMSUNG_SEW2003U_ID  0x7011 /* Samsung SEW-2003U Card */
+
+#define USB_IGATE_VENDOR_ID      0x0681
+#define USB_IGATE_IGATE_11M_ID   0x0012 /* I-GATE 11M USB Card */
+
+#define USB_FUJITSU_VENDOR_ID    0x0BF8
+#define USB_FUJITSU_E1100_ID     0x1002 /* connect2AIR WLAN E-1100 USB */
+
+#define USB_2WIRE_VENDOR_ID      0x1630
+#define USB_2WIRE_WIRELESS_ID    0xff81 /* 2Wire Wireless USB adapter */
+
+
+#define EZUSB_REQUEST_FW_TRANS		0xA0
+#define EZUSB_REQUEST_TRIGER		0xAA
+#define EZUSB_REQUEST_TRIG_AC		0xAC
+#define EZUSB_CPUCS_REG			0x7F92
+
+#define EZUSB_RID_TX			0x0700
+#define EZUSB_RID_RX			0x0701
+#define EZUSB_RID_INIT1			0x0702
+#define EZUSB_RID_ACK			0x0710
+#define EZUSB_RID_DOCMD			0x0860
+
+/* Recognize info frames */
+#define EZUSB_IS_INFO(id)		((id >= 0xF000) && (id <= 0xF2FF))
+
+#define EZUSB_MAGIC			0x0210
+
+#define EZUSB_FRAME_DATA		1
+#define EZUSB_FRAME_CONTROL		2
+
+#define DEF_TIMEOUT			(3*HZ)
+
+#define BULK_BUF_SIZE			2048
+
+#define FW_BUF_SIZE			64
+#define FW_VAR_OFFSET_PTR		0x359
+#define FW_VAR_VALUE			0
+#define FW_HOLE_START			0x100
+#define FW_HOLE_END			0x300
+
+struct ezusb_packet {
+	__le16 magic;		/* 0x0210 */
+	u8 req_reply_count;
+	u8 ans_reply_count;
+	__le16 frame_type;	/* 0x01 for data frames, 0x02 otherwise */
+	__le16 size;		/* transport size */
+	__le16 crc;		/* CRC up to here */
+	__le16 hermes_len;
+	__le16 hermes_rid;
+	u8 data[0];
+} __attribute__ ((packed));
+
+/* Table of devices that work or may work with this driver */
+static struct usb_device_id ezusb_table[] = {
+	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)},
+	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)},
+	{USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)},
+	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)},
+	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)},
+	{USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)},
+	{USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)},
+	{USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
+	{USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)},
+	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)},
+	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)},
+	{USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)},
+	{USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)},
+	{USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID,
+			0, 0)},
+	{USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)},
+	{USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)},
+	{USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)},
+	{USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)},
+	{USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)},
+	{USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)},
+	{}			/* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, ezusb_table);
+
+/* Structure to hold all of our device specific stuff */
+struct ezusb_priv {
+	struct usb_device *udev;
+	struct net_device *dev;
+	struct mutex mtx;
+	spinlock_t req_lock;
+	struct list_head req_pending;
+	struct list_head req_active;
+	spinlock_t reply_count_lock;
+	u16 hermes_reg_fake[0x40];
+	u8 *bap_buf;
+	struct urb *read_urb;
+	int read_pipe;
+	int write_pipe;
+	u8 reply_count;
+};
+
+enum ezusb_state {
+	EZUSB_CTX_START,
+	EZUSB_CTX_QUEUED,
+	EZUSB_CTX_REQ_SUBMITTED,
+	EZUSB_CTX_REQ_COMPLETE,
+	EZUSB_CTX_RESP_RECEIVED,
+	EZUSB_CTX_REQ_TIMEOUT,
+	EZUSB_CTX_REQ_FAILED,
+	EZUSB_CTX_RESP_TIMEOUT,
+	EZUSB_CTX_REQSUBMIT_FAIL,
+	EZUSB_CTX_COMPLETE,
+};
+
+struct request_context {
+	struct list_head list;
+	atomic_t refcount;
+	struct completion done;	/* Signals that CTX is dead */
+	int killed;
+	struct urb *outurb;	/* OUT for req pkt */
+	struct ezusb_priv *upriv;
+	struct ezusb_packet *buf;
+	int buf_length;
+	struct timer_list timer;	/* Timeout handling */
+	enum ezusb_state state;	/* Current state */
+	/* the RID that we will wait for */
+	u16 out_rid;
+	u16 in_rid;
+};
+
+
+/* Forward declarations */
+static void ezusb_ctx_complete(struct request_context *ctx);
+static void ezusb_req_queue_run(struct ezusb_priv *upriv);
+static void ezusb_bulk_in_callback(struct urb *urb);
+
+static inline u8 ezusb_reply_inc(u8 count)
+{
+	if (count < 0x7F)
+		return count + 1;
+	else
+		return 1;
+}
+
+static void ezusb_request_context_put(struct request_context *ctx)
+{
+	if (!atomic_dec_and_test(&ctx->refcount))
+		return;
+
+	WARN_ON(!ctx->done.done);
+	BUG_ON(ctx->outurb->status == -EINPROGRESS);
+	BUG_ON(timer_pending(&ctx->timer));
+	usb_free_urb(ctx->outurb);
+	kfree(ctx->buf);
+	kfree(ctx);
+}
+
+static inline void ezusb_mod_timer(struct ezusb_priv *upriv,
+				   struct timer_list *timer,
+				   unsigned long expire)
+{
+	if (!upriv->udev)
+		return;
+	mod_timer(timer, expire);
+}
+
+static void ezusb_request_timerfn(u_long _ctx)
+{
+	struct request_context *ctx = (void *) _ctx;
+
+	ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+	if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) {
+		ctx->state = EZUSB_CTX_REQ_TIMEOUT;
+	} else {
+		ctx->state = EZUSB_CTX_RESP_TIMEOUT;
+		dbg("couldn't unlink");
+		atomic_inc(&ctx->refcount);
+		ctx->killed = 1;
+		ezusb_ctx_complete(ctx);
+		ezusb_request_context_put(ctx);
+	}
+};
+
+static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv,
+					       u16 out_rid, u16 in_rid)
+{
+	struct request_context *ctx;
+
+	ctx = kmalloc(sizeof(*ctx), GFP_ATOMIC);
+	if (!ctx)
+		return NULL;
+
+	memset(ctx, 0, sizeof(*ctx));
+
+	ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC);
+	if (!ctx->buf) {
+		kfree(ctx);
+		return NULL;
+	}
+	ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC);
+	if (!ctx->outurb) {
+		kfree(ctx->buf);
+		kfree(ctx);
+		return NULL;
+	}
+
+	ctx->upriv = upriv;
+	ctx->state = EZUSB_CTX_START;
+	ctx->out_rid = out_rid;
+	ctx->in_rid = in_rid;
+
+	atomic_set(&ctx->refcount, 1);
+	init_completion(&ctx->done);
+
+	init_timer(&ctx->timer);
+	ctx->timer.function = ezusb_request_timerfn;
+	ctx->timer.data = (u_long) ctx;
+	return ctx;
+}
+
+
+/* Hopefully the real complete_all will soon be exported, in the mean
+ * while this should work. */
+static inline void ezusb_complete_all(struct completion *comp)
+{
+	complete(comp);
+	complete(comp);
+	complete(comp);
+	complete(comp);
+}
+
+static void ezusb_ctx_complete(struct request_context *ctx)
+{
+	struct ezusb_priv *upriv = ctx->upriv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+
+	list_del_init(&ctx->list);
+	if (upriv->udev) {
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		ezusb_req_queue_run(upriv);
+		spin_lock_irqsave(&upriv->req_lock, flags);
+	}
+
+	switch (ctx->state) {
+	case EZUSB_CTX_COMPLETE:
+	case EZUSB_CTX_REQSUBMIT_FAIL:
+	case EZUSB_CTX_REQ_FAILED:
+	case EZUSB_CTX_REQ_TIMEOUT:
+	case EZUSB_CTX_RESP_TIMEOUT:
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+		if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) {
+			struct net_device *dev = upriv->dev;
+			struct orinoco_private *priv = ndev_priv(dev);
+			struct net_device_stats *stats = &priv->stats;
+
+			if (ctx->state != EZUSB_CTX_COMPLETE)
+				stats->tx_errors++;
+			else
+				stats->tx_packets++;
+
+			netif_wake_queue(dev);
+		}
+		ezusb_complete_all(&ctx->done);
+		ezusb_request_context_put(ctx);
+		break;
+
+	default:
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		if (!upriv->udev) {
+			/* This is normal, as all request contexts get flushed
+			 * when the device is disconnected */
+			err("Called, CTX not terminating, but device gone");
+			ezusb_complete_all(&ctx->done);
+			ezusb_request_context_put(ctx);
+			break;
+		}
+
+		err("Called, CTX not in terminating state.");
+		/* Things are really bad if this happens. Just leak
+		 * the CTX because it may still be linked to the
+		 * queue or the OUT urb may still be active.
+		 * Just leaking at least prevents an Oops or Panic.
+		 */
+		break;
+	}
+}
+
+/**
+ * ezusb_req_queue_run:
+ * Description:
+ *	Note: Only one active CTX at any one time, because there's no
+ *	other (reliable) way to match the response URB to the correct
+ *	CTX.
+ **/
+static void ezusb_req_queue_run(struct ezusb_priv *upriv)
+{
+	unsigned long flags;
+	struct request_context *ctx;
+	int result;
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+
+	if (!list_empty(&upriv->req_active))
+		goto unlock;
+
+	if (list_empty(&upriv->req_pending))
+		goto unlock;
+
+	ctx =
+	    list_entry(upriv->req_pending.next, struct request_context,
+		       list);
+
+	if (!ctx->upriv->udev)
+		goto unlock;
+
+	/* We need to split this off to avoid a race condition */
+	list_move_tail(&ctx->list, &upriv->req_active);
+
+	if (ctx->state == EZUSB_CTX_QUEUED) {
+		atomic_inc(&ctx->refcount);
+		result = usb_submit_urb(ctx->outurb, GFP_ATOMIC);
+		if (result) {
+			ctx->state = EZUSB_CTX_REQSUBMIT_FAIL;
+
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+			err("Fatal, failed to submit command urb."
+			    " error=%d\n", result);
+
+			ezusb_ctx_complete(ctx);
+			ezusb_request_context_put(ctx);
+			goto done;
+		}
+
+		ctx->state = EZUSB_CTX_REQ_SUBMITTED;
+		ezusb_mod_timer(ctx->upriv, &ctx->timer,
+				jiffies + DEF_TIMEOUT);
+	}
+
+ unlock:
+	spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+ done:
+	return;
+}
+
+static void ezusb_req_enqueue_run(struct ezusb_priv *upriv,
+				  struct request_context *ctx)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+
+	if (!ctx->upriv->udev) {
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		goto done;
+	}
+	atomic_inc(&ctx->refcount);
+	list_add_tail(&ctx->list, &upriv->req_pending);
+	spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+	ctx->state = EZUSB_CTX_QUEUED;
+	ezusb_req_queue_run(upriv);
+
+ done:
+	return;
+}
+
+static void ezusb_request_out_callback(struct urb *urb)
+{
+	unsigned long flags;
+	enum ezusb_state state;
+	struct request_context *ctx = urb->context;
+	struct ezusb_priv *upriv = ctx->upriv;
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+
+	del_timer(&ctx->timer);
+
+	if (ctx->killed) {
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		pr_warning("interrupt called with dead ctx");
+		goto out;
+	}
+
+	state = ctx->state;
+
+	if (urb->status == 0) {
+		switch (state) {
+		case EZUSB_CTX_REQ_SUBMITTED:
+			if (ctx->in_rid) {
+				ctx->state = EZUSB_CTX_REQ_COMPLETE;
+				/* reply URB still pending */
+				ezusb_mod_timer(upriv, &ctx->timer,
+						jiffies + DEF_TIMEOUT);
+				spin_unlock_irqrestore(&upriv->req_lock,
+						       flags);
+				break;
+			}
+			/* fall through */
+		case EZUSB_CTX_RESP_RECEIVED:
+			/* IN already received before this OUT-ACK */
+			ctx->state = EZUSB_CTX_COMPLETE;
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+			ezusb_ctx_complete(ctx);
+			break;
+
+		default:
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+			err("Unexpected state(0x%x, %d) in OUT URB",
+			    state, urb->status);
+			break;
+		}
+	} else {
+		/* If someone cancels the OUT URB then its status
+		 * should be either -ECONNRESET or -ENOENT.
+		 */
+		switch (state) {
+		case EZUSB_CTX_REQ_SUBMITTED:
+		case EZUSB_CTX_RESP_RECEIVED:
+			ctx->state = EZUSB_CTX_REQ_FAILED;
+			/* fall through */
+
+		case EZUSB_CTX_REQ_FAILED:
+		case EZUSB_CTX_REQ_TIMEOUT:
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+			ezusb_ctx_complete(ctx);
+			break;
+
+		default:
+			spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+			err("Unexpected state(0x%x, %d) in OUT URB",
+			    state, urb->status);
+			break;
+		}
+	}
+ out:
+	ezusb_request_context_put(ctx);
+}
+
+static void ezusb_request_in_callback(struct ezusb_priv *upriv,
+				      struct urb *urb)
+{
+	struct ezusb_packet *ans = urb->transfer_buffer;
+	struct request_context *ctx = NULL;
+	enum ezusb_state state;
+	unsigned long flags;
+
+	/* Find the CTX on the active queue that requested this URB */
+	spin_lock_irqsave(&upriv->req_lock, flags);
+	if (upriv->udev) {
+		struct list_head *item;
+
+		list_for_each(item, &upriv->req_active) {
+			struct request_context *c;
+			int reply_count;
+
+			c = list_entry(item, struct request_context, list);
+			reply_count =
+			    ezusb_reply_inc(c->buf->req_reply_count);
+			if ((ans->ans_reply_count == reply_count)
+			    && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) {
+				ctx = c;
+				break;
+			}
+			dbg("Skipped (0x%x/0x%x) (%d/%d)",
+			    le16_to_cpu(ans->hermes_rid),
+			    c->in_rid, ans->ans_reply_count, reply_count);
+		}
+	}
+
+	if (ctx == NULL) {
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		err("%s: got unexpected RID: 0x%04X", __func__,
+		    le16_to_cpu(ans->hermes_rid));
+		ezusb_req_queue_run(upriv);
+		return;
+	}
+
+	/* The data we want is in the in buffer, exchange */
+	urb->transfer_buffer = ctx->buf;
+	ctx->buf = (void *) ans;
+	ctx->buf_length = urb->actual_length;
+
+	state = ctx->state;
+	switch (state) {
+	case EZUSB_CTX_REQ_SUBMITTED:
+		/* We have received our response URB before
+		 * our request has been acknowledged. Do NOT
+		 * destroy our CTX yet, because our OUT URB
+		 * is still alive ...
+		 */
+		ctx->state = EZUSB_CTX_RESP_RECEIVED;
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+		/* Let the machine continue running. */
+		break;
+
+	case EZUSB_CTX_REQ_COMPLETE:
+		/* This is the usual path: our request
+		 * has already been acknowledged, and
+		 * we have now received the reply.
+		 */
+		ctx->state = EZUSB_CTX_COMPLETE;
+
+		/* Stop the intimer */
+		del_timer(&ctx->timer);
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+		/* Call the completion handler */
+		ezusb_ctx_complete(ctx);
+		break;
+
+	default:
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+		pr_warning("Matched IN URB, unexpected context state(0x%x)",
+		     state);
+		/* Throw this CTX away and try submitting another */
+		del_timer(&ctx->timer);
+		ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+		usb_unlink_urb(ctx->outurb);
+		ezusb_req_queue_run(upriv);
+		break;
+	}			/* switch */
+}
+
+
+static void ezusb_req_ctx_wait(struct ezusb_priv *upriv,
+			       struct request_context *ctx)
+{
+	switch (ctx->state) {
+	case EZUSB_CTX_QUEUED:
+	case EZUSB_CTX_REQ_SUBMITTED:
+	case EZUSB_CTX_REQ_COMPLETE:
+	case EZUSB_CTX_RESP_RECEIVED:
+		if (in_atomic()) {
+			/* If we get called from a timer, timeout timers don't
+			 * get the chance to run themselves. So we make sure
+			 * that we don't sleep for ever */
+			int msecs = DEF_TIMEOUT * (1000 / HZ);
+			while (!ctx->done.done && msecs--)
+				udelay(1000);
+		} else {
+			wait_event_interruptible(ctx->done.wait,
+						 ctx->done.done);
+		}
+		break;
+	default:
+		/* Done or failed - nothing to wait for */
+		break;
+	}
+}
+
+static inline u16 build_crc(struct ezusb_packet *data)
+{
+	u16 crc = 0;
+	u8 *bytes = (u8 *)data;
+	int i;
+
+	for (i = 0; i < 8; i++)
+		crc = (crc << 1) + bytes[i];
+
+	return crc;
+}
+
+/**
+ * ezusb_fill_req:
+ *
+ * if data == NULL and length > 0 the data is assumed to be already in
+ * the target buffer and only the header is filled.
+ *
+ */
+static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid,
+			  const void *data, u16 frame_type, u8 reply_count)
+{
+	int total_size = sizeof(*req) + length;
+
+	BUG_ON(total_size > BULK_BUF_SIZE);
+
+	req->magic = cpu_to_le16(EZUSB_MAGIC);
+	req->req_reply_count = reply_count;
+	req->ans_reply_count = 0;
+	req->frame_type = cpu_to_le16(frame_type);
+	req->size = cpu_to_le16(length + 4);
+	req->crc = cpu_to_le16(build_crc(req));
+	req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length));
+	req->hermes_rid = cpu_to_le16(rid);
+	if (data)
+		memcpy(req->data, data, length);
+	return total_size;
+}
+
+static int ezusb_submit_in_urb(struct ezusb_priv *upriv)
+{
+	int retval = 0;
+	void *cur_buf = upriv->read_urb->transfer_buffer;
+
+	if (upriv->read_urb->status == -EINPROGRESS) {
+		dbg("urb busy, not resubmiting");
+		retval = -EBUSY;
+		goto exit;
+	}
+	usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe,
+			  cur_buf, BULK_BUF_SIZE,
+			  ezusb_bulk_in_callback, upriv);
+	upriv->read_urb->transfer_flags = 0;
+	retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC);
+	if (retval)
+		err("%s submit failed %d", __func__, retval);
+
+ exit:
+	return retval;
+}
+
+static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset)
+{
+	u8 res_val = reset;	/* avoid argument promotion */
+
+	if (!upriv->udev) {
+		err("%s: !upriv->udev", __func__);
+		return -EFAULT;
+	}
+	return usb_control_msg(upriv->udev,
+			       usb_sndctrlpipe(upriv->udev, 0),
+			       EZUSB_REQUEST_FW_TRANS,
+			       USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+			       USB_DIR_OUT, EZUSB_CPUCS_REG, 0, &res_val,
+			       sizeof(res_val), DEF_TIMEOUT);
+}
+
+static int ezusb_firmware_download(struct ezusb_priv *upriv,
+				   struct ez_usb_fw *fw)
+{
+	u8 fw_buffer[FW_BUF_SIZE];
+	int retval, addr;
+	int variant_offset;
+
+	/*
+	 * This byte is 1 and should be replaced with 0.  The offset is
+	 * 0x10AD in version 0.0.6.  The byte in question should follow
+	 * the end of the code pointed to by the jump in the beginning
+	 * of the firmware.  Also, it is read by code located at 0x358.
+	 */
+	variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]);
+	if (variant_offset >= fw->size) {
+		printk(KERN_ERR PFX "Invalid firmware variant offset: "
+		       "0x%04x\n", variant_offset);
+		retval = -EINVAL;
+		goto fail;
+	}
+
+	retval = ezusb_8051_cpucs(upriv, 1);
+	if (retval < 0)
+		goto fail;
+	for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) {
+		/* 0x100-0x300 should be left alone, it contains card
+		 * specific data, like USB enumeration information */
+		if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END))
+			continue;
+
+		memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE);
+		if (variant_offset >= addr &&
+		    variant_offset < addr + FW_BUF_SIZE) {
+			dbg("Patching card_variant byte at 0x%04X",
+			    variant_offset);
+			fw_buffer[variant_offset - addr] = FW_VAR_VALUE;
+		}
+		retval = usb_control_msg(upriv->udev,
+					 usb_sndctrlpipe(upriv->udev, 0),
+					 EZUSB_REQUEST_FW_TRANS,
+					 USB_TYPE_VENDOR | USB_RECIP_DEVICE
+					 | USB_DIR_OUT,
+					 addr, 0x0,
+					 fw_buffer, FW_BUF_SIZE,
+					 DEF_TIMEOUT);
+
+		if (retval < 0)
+			goto fail;
+	}
+	retval = ezusb_8051_cpucs(upriv, 0);
+	if (retval < 0)
+		goto fail;
+
+	goto exit;
+ fail:
+	printk(KERN_ERR PFX "Firmware download failed, error %d\n",
+	       retval);
+ exit:
+	return retval;
+}
+
+static int ezusb_access_ltv(struct ezusb_priv *upriv,
+			    struct request_context *ctx,
+			    u16 length, const void *data, u16 frame_type,
+			    void *ans_buff, int ans_size, u16 *ans_length)
+{
+	int req_size;
+	int retval = 0;
+	enum ezusb_state state;
+
+	BUG_ON(in_irq());
+
+	if (!upriv->udev) {
+		dbg("Device disconnected");
+		return -ENODEV;
+	}
+
+	if (upriv->read_urb->status != -EINPROGRESS)
+		err("%s: in urb not pending", __func__);
+
+	/* protect upriv->reply_count, guarantee sequential numbers */
+	spin_lock_bh(&upriv->reply_count_lock);
+	req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data,
+				  frame_type, upriv->reply_count);
+	usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe,
+			  ctx->buf, req_size,
+			  ezusb_request_out_callback, ctx);
+
+	if (ctx->in_rid)
+		upriv->reply_count = ezusb_reply_inc(upriv->reply_count);
+
+	ezusb_req_enqueue_run(upriv, ctx);
+
+	spin_unlock_bh(&upriv->reply_count_lock);
+
+	if (ctx->in_rid)
+		ezusb_req_ctx_wait(upriv, ctx);
+
+	state = ctx->state;
+	switch (state) {
+	case EZUSB_CTX_COMPLETE:
+		retval = ctx->outurb->status;
+		break;
+
+	case EZUSB_CTX_QUEUED:
+	case EZUSB_CTX_REQ_SUBMITTED:
+		if (!ctx->in_rid)
+			break;
+	default:
+		err("%s: Unexpected context state %d", __func__,
+		    state);
+		/* fall though */
+	case EZUSB_CTX_REQ_TIMEOUT:
+	case EZUSB_CTX_REQ_FAILED:
+	case EZUSB_CTX_RESP_TIMEOUT:
+	case EZUSB_CTX_REQSUBMIT_FAIL:
+		printk(KERN_ERR PFX "Access failed, resetting (state %d,"
+		       " reply_count %d)\n", state, upriv->reply_count);
+		upriv->reply_count = 0;
+		if (state == EZUSB_CTX_REQ_TIMEOUT
+		    || state == EZUSB_CTX_RESP_TIMEOUT) {
+			printk(KERN_ERR PFX "ctx timed out\n");
+			retval = -ETIMEDOUT;
+		} else {
+			printk(KERN_ERR PFX "ctx failed\n");
+			retval = -EFAULT;
+		}
+		goto exit;
+		break;
+	}
+	if (ctx->in_rid) {
+		struct ezusb_packet *ans = ctx->buf;
+		int exp_len;
+
+		if (ans->hermes_len != 0)
+			exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12;
+		else
+			exp_len = 14;
+
+		if (exp_len != ctx->buf_length) {
+			err("%s: length mismatch for RID 0x%04x: "
+			    "expected %d, got %d", __func__,
+			    ctx->in_rid, exp_len, ctx->buf_length);
+			retval = -EIO;
+			goto exit;
+		}
+
+		if (ans_buff)
+			memcpy(ans_buff, ans->data,
+			       min_t(int, exp_len, ans_size));
+		if (ans_length)
+			*ans_length = le16_to_cpu(ans->hermes_len);
+	}
+ exit:
+	ezusb_request_context_put(ctx);
+	return retval;
+}
+
+static int ezusb_write_ltv(hermes_t *hw, int bap, u16 rid,
+			   u16 length, const void *data)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	u16 frame_type;
+	struct request_context *ctx;
+
+	if (length == 0)
+		return -EINVAL;
+
+	length = HERMES_RECLEN_TO_BYTES(length);
+
+	/* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be
+	 * set to be empty, but the USB bridge doesn't like it */
+	if (length == 0)
+		return 0;
+
+	ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	if (rid == EZUSB_RID_TX)
+		frame_type = EZUSB_FRAME_DATA;
+	else
+		frame_type = EZUSB_FRAME_CONTROL;
+
+	return ezusb_access_ltv(upriv, ctx, length, data, frame_type,
+				NULL, 0, NULL);
+}
+
+static int ezusb_read_ltv(hermes_t *hw, int bap, u16 rid,
+			  unsigned bufsize, u16 *length, void *buf)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+
+	if ((bufsize < 0) || (bufsize % 2))
+		return -EINVAL;
+
+	ctx = ezusb_alloc_ctx(upriv, rid, rid);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL,
+				buf, bufsize, length);
+}
+
+static int ezusb_doicmd_wait(hermes_t *hw, u16 cmd, u16 parm0, u16 parm1,
+			     u16 parm2, struct hermes_response *resp)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+
+	__le16 data[4] = {
+		cpu_to_le16(cmd),
+		cpu_to_le16(parm0),
+		cpu_to_le16(parm1),
+		cpu_to_le16(parm2),
+	};
+	dbg("0x%04X, parm0 0x%04X, parm1 0x%04X, parm2 0x%04X",
+	    cmd, parm0, parm1, parm2);
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+				EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+			    struct hermes_response *resp)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct request_context *ctx;
+
+	__le16 data[4] = {
+		cpu_to_le16(cmd),
+		cpu_to_le16(parm0),
+		0,
+		0,
+	};
+	dbg("0x%04X, parm0 0x%04X", cmd, parm0);
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK);
+	if (!ctx)
+		return -ENOMEM;
+
+	return ezusb_access_ltv(upriv, ctx, sizeof(data), &data,
+				EZUSB_FRAME_CONTROL, NULL, 0, NULL);
+}
+
+static int ezusb_bap_pread(struct hermes *hw, int bap,
+			   void *buf, int len, u16 id, u16 offset)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer;
+	int actual_length = upriv->read_urb->actual_length;
+
+	if (id == EZUSB_RID_RX) {
+		if ((sizeof(*ans) + offset + len) > actual_length) {
+			printk(KERN_ERR PFX "BAP read beyond buffer end "
+			       "in rx frame\n");
+			return -EINVAL;
+		}
+		memcpy(buf, ans->data + offset, len);
+		return 0;
+	}
+
+	if (EZUSB_IS_INFO(id)) {
+		/* Include 4 bytes for length/type */
+		if ((sizeof(*ans) + offset + len - 4) > actual_length) {
+			printk(KERN_ERR PFX "BAP read beyond buffer end "
+			       "in info frame\n");
+			return -EFAULT;
+		}
+		memcpy(buf, ans->data + offset - 4, len);
+	} else {
+		printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct orinoco_private *priv = ndev_priv(dev);
+	struct net_device_stats *stats = &priv->stats;
+	struct ezusb_priv *upriv = priv->card;
+	int err = 0;
+	char *p;
+	struct ethhdr *eh;
+	int len, data_len, data_off;
+	__le16 tx_control;
+	unsigned long flags;
+	struct request_context *ctx;
+	u8 *buf;
+	int tx_size;
+
+	if (!netif_running(dev)) {
+		printk(KERN_ERR "%s: Tx on stopped device!\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (netif_queue_stopped(dev)) {
+		printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (orinoco_lock(priv, &flags) != 0) {
+		printk(KERN_ERR
+		       "%s: orinoco_xmit() called while hw_unavailable\n",
+		       dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	if (!netif_carrier_ok(dev) ||
+	    (priv->iw_mode == NL80211_IFTYPE_MONITOR)) {
+		/* Oops, the firmware hasn't established a connection,
+		   silently drop the packet (this seems to be the
+		   safest approach). */
+		stats->tx_errors++;
+		orinoco_unlock(priv, &flags);
+		dev_kfree_skb(skb);
+		return NETDEV_TX_OK;
+	}
+
+	ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0);
+	if (!ctx)
+		goto fail;
+
+	memset(ctx->buf, 0, BULK_BUF_SIZE);
+	buf = ctx->buf->data;
+
+	/* Length of the packet body */
+	/* FIXME: what if the skb is smaller than this? */
+	len = max_t(int, skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);
+
+	eh = (struct ethhdr *) skb->data;
+
+	tx_control = cpu_to_le16(0);
+	memcpy(buf, &tx_control, sizeof(tx_control));
+	buf += sizeof(tx_control);
+	/* Encapsulate Ethernet-II frames */
+	if (ntohs(eh->h_proto) > ETH_DATA_LEN) {	/* Ethernet-II frame */
+		struct header_struct *hdr = (void *) buf;
+		buf += sizeof(*hdr);
+		data_len = len;
+		data_off = sizeof(tx_control) + sizeof(*hdr);
+		p = skb->data + ETH_HLEN;
+
+		/* 802.3 header */
+		memcpy(hdr->dest, eh->h_dest, ETH_ALEN);
+		memcpy(hdr->src, eh->h_source, ETH_ALEN);
+		hdr->len = htons(data_len + ENCAPS_OVERHEAD);
+
+		/* 802.2 header */
+		memcpy(&hdr->dsap, &encaps_hdr, sizeof(encaps_hdr));
+
+		hdr->ethertype = eh->h_proto;
+	} else {		/* IEEE 802.3 frame */
+		data_len = len + ETH_HLEN;
+		data_off = sizeof(tx_control);
+		p = skb->data;
+	}
+
+	memcpy(buf, p, data_len);
+	buf += data_len;
+
+	/* Finally, we actually initiate the send */
+	netif_stop_queue(dev);
+
+	/* The card may behave better if we send evenly sized usb transfers */
+	tx_size = ALIGN(buf - ctx->buf->data, 2);
+
+	err = ezusb_access_ltv(upriv, ctx, tx_size, NULL,
+			       EZUSB_FRAME_DATA, NULL, 0, NULL);
+
+	if (err) {
+		netif_start_queue(dev);
+		if (net_ratelimit())
+			printk(KERN_ERR "%s: Error %d transmitting packet\n",
+				dev->name, err);
+		stats->tx_errors++;
+		goto fail;
+	}
+
+	dev->trans_start = jiffies;
+	stats->tx_bytes += data_off + data_len;
+
+	orinoco_unlock(priv, &flags);
+
+	dev_kfree_skb(skb);
+
+	return NETDEV_TX_OK;
+
+ fail:
+	orinoco_unlock(priv, &flags);
+	return NETDEV_TX_BUSY;
+}
+
+static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid)
+{
+	*fid = EZUSB_RID_TX;
+	return 0;
+}
+
+
+static int ezusb_hard_reset(struct orinoco_private *priv)
+{
+	struct ezusb_priv *upriv = priv->card;
+	int retval = ezusb_8051_cpucs(upriv, 1);
+
+	if (retval < 0) {
+		err("Failed to reset");
+		return retval;
+	}
+
+	retval = ezusb_8051_cpucs(upriv, 0);
+	if (retval < 0) {
+		err("Failed to unreset");
+		return retval;
+	}
+
+	dbg("sending control message");
+	retval = usb_control_msg(upriv->udev,
+				 usb_sndctrlpipe(upriv->udev, 0),
+				 EZUSB_REQUEST_TRIGER,
+				 USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+				 USB_DIR_OUT, 0x0, 0x0, NULL, 0,
+				 DEF_TIMEOUT);
+	if (retval < 0) {
+		err("EZUSB_REQUEST_TRIGER failed retval %d", retval);
+		return retval;
+	}
+#if 0
+	dbg("Sending EZUSB_REQUEST_TRIG_AC");
+	retval = usb_control_msg(upriv->udev,
+				 usb_sndctrlpipe(upriv->udev, 0),
+				 EZUSB_REQUEST_TRIG_AC,
+				 USB_TYPE_VENDOR | USB_RECIP_DEVICE |
+				 USB_DIR_OUT, 0x00FA, 0x0, NULL, 0,
+				 DEF_TIMEOUT);
+	if (retval < 0) {
+		err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval);
+		return retval;
+	}
+#endif
+
+	return 0;
+}
+
+
+static int ezusb_init(hermes_t *hw)
+{
+	struct ezusb_priv *upriv = hw->priv;
+	int retval;
+
+	BUG_ON(in_interrupt());
+	BUG_ON(!upriv);
+
+	upriv->reply_count = 0;
+	/* Write the MAGIC number on the simulated registers to keep
+	 * orinoco.c happy */
+	hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
+	hermes_write_regn(hw, RXFID, EZUSB_RID_RX);
+
+	usb_kill_urb(upriv->read_urb);
+	ezusb_submit_in_urb(upriv);
+
+	retval = ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1,
+				 HERMES_BYTES_TO_RECLEN(2), "\x10\x00");
+	if (retval < 0) {
+		printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval);
+		return retval;
+	}
+
+	retval = ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL);
+	if (retval < 0) {
+		printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval);
+		return retval;
+	}
+
+	return 0;
+}
+
+static void ezusb_bulk_in_callback(struct urb *urb)
+{
+	struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context;
+	struct ezusb_packet *ans = urb->transfer_buffer;
+	u16 crc;
+	u16 hermes_rid;
+
+	if (upriv->udev == NULL) {
+		dbg("disconnected");
+		return;
+	}
+
+	if (urb->status == -ETIMEDOUT) {
+		/* When a device gets unplugged we get this every time
+		 * we resubmit, flooding the logs.  Since we don't use
+		 * USB timeouts, it shouldn't happen any other time*/
+		pr_warning("%s: urb timed out, not resubmiting", __func__);
+		return;
+	}
+	if (urb->status == -ECONNABORTED) {
+		pr_warning("%s: connection abort, resubmiting urb",
+		     __func__);
+		goto resubmit;
+	}
+	if ((urb->status == -EILSEQ)
+	    || (urb->status == -ENOENT)
+	    || (urb->status == -ECONNRESET)) {
+		dbg("status %d, not resubmiting", urb->status);
+		return;
+	}
+	if (urb->status)
+		dbg("status: %d length: %d",
+		    urb->status, urb->actual_length);
+	if (urb->actual_length < sizeof(*ans)) {
+		err("%s: short read, ignoring", __func__);
+		goto resubmit;
+	}
+	crc = build_crc(ans);
+	if (le16_to_cpu(ans->crc) != crc) {
+		err("CRC error, ignoring packet");
+		goto resubmit;
+	}
+
+	hermes_rid = le16_to_cpu(ans->hermes_rid);
+	if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) {
+		ezusb_request_in_callback(upriv, urb);
+	} else if (upriv->dev) {
+		struct net_device *dev = upriv->dev;
+		struct orinoco_private *priv = ndev_priv(dev);
+		hermes_t *hw = &priv->hw;
+
+		if (hermes_rid == EZUSB_RID_RX) {
+			__orinoco_ev_rx(dev, hw);
+		} else {
+			hermes_write_regn(hw, INFOFID,
+					  le16_to_cpu(ans->hermes_rid));
+			__orinoco_ev_info(dev, hw);
+		}
+	}
+
+ resubmit:
+	if (upriv->udev)
+		ezusb_submit_in_urb(upriv);
+}
+
+static inline void ezusb_delete(struct ezusb_priv *upriv)
+{
+	struct net_device *dev;
+	struct list_head *item;
+	struct list_head *tmp_item;
+	unsigned long flags;
+
+	BUG_ON(in_interrupt());
+	BUG_ON(!upriv);
+
+	dev = upriv->dev;
+	mutex_lock(&upriv->mtx);
+
+	upriv->udev = NULL;	/* No timer will be rearmed from here */
+
+	usb_kill_urb(upriv->read_urb);
+
+	spin_lock_irqsave(&upriv->req_lock, flags);
+	list_for_each_safe(item, tmp_item, &upriv->req_active) {
+		struct request_context *ctx;
+		int err;
+
+		ctx = list_entry(item, struct request_context, list);
+		atomic_inc(&ctx->refcount);
+
+		ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK;
+		err = usb_unlink_urb(ctx->outurb);
+
+		spin_unlock_irqrestore(&upriv->req_lock, flags);
+		if (err == -EINPROGRESS)
+			wait_for_completion(&ctx->done);
+
+		del_timer_sync(&ctx->timer);
+		/* FIXME: there is an slight chance for the irq handler to
+		 * be running */
+		if (!list_empty(&ctx->list))
+			ezusb_ctx_complete(ctx);
+
+		ezusb_request_context_put(ctx);
+		spin_lock_irqsave(&upriv->req_lock, flags);
+	}
+	spin_unlock_irqrestore(&upriv->req_lock, flags);
+
+	list_for_each_safe(item, tmp_item, &upriv->req_pending)
+	    ezusb_ctx_complete(list_entry(item,
+					  struct request_context, list));
+
+	if (upriv->read_urb->status == -EINPROGRESS)
+		printk(KERN_ERR PFX "Some URB in progress\n");
+
+	mutex_unlock(&upriv->mtx);
+
+	kfree(upriv->read_urb->transfer_buffer);
+	if (upriv->bap_buf != NULL)
+		kfree(upriv->bap_buf);
+	if (upriv->read_urb != NULL)
+		usb_free_urb(upriv->read_urb);
+	if (upriv->dev) {
+		struct orinoco_private *priv = ndev_priv(upriv->dev);
+		orinoco_if_del(priv);
+		free_orinocodev(priv);
+	}
+}
+
+static void ezusb_lock_irqsave(spinlock_t *lock,
+			       unsigned long *flags) __acquires(lock)
+{
+	spin_lock_bh(lock);
+}
+
+static void ezusb_unlock_irqrestore(spinlock_t *lock,
+				    unsigned long *flags) __releases(lock)
+{
+	spin_unlock_bh(lock);
+}
+
+static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock)
+{
+	spin_lock_bh(lock);
+}
+
+static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock)
+{
+	spin_unlock_bh(lock);
+}
+
+static const struct hermes_ops ezusb_ops = {
+	.init = ezusb_init,
+	.cmd_wait = ezusb_docmd_wait,
+	.init_cmd_wait = ezusb_doicmd_wait,
+	.allocate = ezusb_allocate,
+	.read_ltv = ezusb_read_ltv,
+	.write_ltv = ezusb_write_ltv,
+	.bap_pread = ezusb_bap_pread,
+	.lock_irqsave = ezusb_lock_irqsave,
+	.unlock_irqrestore = ezusb_unlock_irqrestore,
+	.lock_irq = ezusb_lock_irq,
+	.unlock_irq = ezusb_unlock_irq,
+};
+
+static const struct net_device_ops ezusb_netdev_ops = {
+	.ndo_open		= orinoco_open,
+	.ndo_stop		= orinoco_stop,
+	.ndo_start_xmit		= ezusb_xmit,
+	.ndo_set_multicast_list	= orinoco_set_multicast_list,
+	.ndo_change_mtu		= orinoco_change_mtu,
+	.ndo_set_mac_address	= eth_mac_addr,
+	.ndo_validate_addr	= eth_validate_addr,
+	.ndo_tx_timeout		= orinoco_tx_timeout,
+	.ndo_get_stats		= orinoco_get_stats,
+};
+
+static int ezusb_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *udev = interface_to_usbdev(interface);
+	struct orinoco_private *priv;
+	hermes_t *hw;
+	struct ezusb_priv *upriv = NULL;
+	struct usb_interface_descriptor *iface_desc;
+	struct usb_endpoint_descriptor *ep;
+	const struct firmware *fw_entry;
+	int retval = 0;
+	int i;
+
+	priv = alloc_orinocodev(sizeof(*upriv), &udev->dev,
+				ezusb_hard_reset, NULL);
+	if (!priv) {
+		err("Couldn't allocate orinocodev");
+		goto exit;
+	}
+
+	hw = &priv->hw;
+
+	upriv = priv->card;
+
+	mutex_init(&upriv->mtx);
+	spin_lock_init(&upriv->reply_count_lock);
+
+	spin_lock_init(&upriv->req_lock);
+	INIT_LIST_HEAD(&upriv->req_pending);
+	INIT_LIST_HEAD(&upriv->req_active);
+
+	upriv->udev = udev;
+
+	hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake;
+	hw->reg_spacing = HERMES_16BIT_REGSPACING;
+	hw->priv = upriv;
+	hw->ops = &ezusb_ops;
+
+	/* set up the endpoint information */
+	/* check out the endpoints */
+
+	iface_desc = &interface->altsetting[0].desc;
+	for (i = 0; i < iface_desc->bNumEndpoints; ++i) {
+		ep = &interface->altsetting[0].endpoint[i].desc;
+
+		if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		     == USB_DIR_IN) &&
+		    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_BULK)) {
+			/* we found a bulk in endpoint */
+			if (upriv->read_urb != NULL) {
+				pr_warning("Found a second bulk in ep, ignored");
+				continue;
+			}
+
+			upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+			if (!upriv->read_urb) {
+				err("No free urbs available");
+				goto error;
+			}
+			if (le16_to_cpu(ep->wMaxPacketSize) != 64)
+				pr_warning("bulk in: wMaxPacketSize!= 64");
+			if (ep->bEndpointAddress != (2 | USB_DIR_IN))
+				pr_warning("bulk in: bEndpointAddress: %d",
+				     ep->bEndpointAddress);
+			upriv->read_pipe = usb_rcvbulkpipe(udev,
+							 ep->
+							 bEndpointAddress);
+			upriv->read_urb->transfer_buffer =
+			    kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
+			if (!upriv->read_urb->transfer_buffer) {
+				err("Couldn't allocate IN buffer");
+				goto error;
+			}
+		}
+
+		if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
+		     == USB_DIR_OUT) &&
+		    ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
+		     == USB_ENDPOINT_XFER_BULK)) {
+			/* we found a bulk out endpoint */
+			if (upriv->bap_buf != NULL) {
+				pr_warning("Found a second bulk out ep, ignored");
+				continue;
+			}
+
+			if (le16_to_cpu(ep->wMaxPacketSize) != 64)
+				pr_warning("bulk out: wMaxPacketSize != 64");
+			if (ep->bEndpointAddress != 2)
+				pr_warning("bulk out: bEndpointAddress: %d",
+				     ep->bEndpointAddress);
+			upriv->write_pipe = usb_sndbulkpipe(udev,
+							  ep->
+							  bEndpointAddress);
+			upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL);
+			if (!upriv->bap_buf) {
+				err("Couldn't allocate bulk_out_buffer");
+				goto error;
+			}
+		}
+	}
+	if (!upriv->bap_buf || !upriv->read_urb) {
+		err("Didn't find the required bulk endpoints");
+		goto error;
+	}
+
+	if (request_firmware(&fw_entry, "orinoco_ezusb_fw",
+			     &interface->dev) == 0) {
+		firmware.size = fw_entry->size;
+		firmware.code = fw_entry->data;
+	}
+	if (firmware.size && firmware.code) {
+		ezusb_firmware_download(upriv, &firmware);
+	} else {
+		err("No firmware to download");
+		goto error;
+	}
+
+	if (ezusb_hard_reset(priv) < 0) {
+		err("Cannot reset the device");
+		goto error;
+	}
+
+	/* If the firmware is already downloaded orinoco.c will call
+	 * ezusb_init but if the firmware is not already there, that will make
+	 * the kernel very unstable, so we try initializing here and quit in
+	 * case of error */
+	if (ezusb_init(hw) < 0) {
+		err("Couldn't initialize the device");
+		err("Firmware may not be downloaded or may be wrong.");
+		goto error;
+	}
+
+	/* Initialise the main driver */
+	if (orinoco_init(priv) != 0) {
+		err("orinoco_init() failed\n");
+		goto error;
+	}
+
+	if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) {
+		upriv->dev = NULL;
+		err("%s: orinoco_if_add() failed", __func__);
+		goto error;
+	}
+	upriv->dev = priv->ndev;
+
+	goto exit;
+
+ error:
+	ezusb_delete(upriv);
+	if (upriv->dev) {
+		/* upriv->dev was 0, so ezusb_delete() didn't free it */
+		free_orinocodev(priv);
+	}
+	upriv = NULL;
+	retval = -EFAULT;
+ exit:
+	if (fw_entry) {
+		firmware.code = NULL;
+		firmware.size = 0;
+		release_firmware(fw_entry);
+	}
+	usb_set_intfdata(interface, upriv);
+	return retval;
+}
+
+
+static void ezusb_disconnect(struct usb_interface *intf)
+{
+	struct ezusb_priv *upriv = usb_get_intfdata(intf);
+	usb_set_intfdata(intf, NULL);
+	ezusb_delete(upriv);
+	printk(KERN_INFO PFX "Disconnected\n");
+}
+
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver orinoco_driver = {
+	.name = DRIVER_NAME,
+	.probe = ezusb_probe,
+	.disconnect = ezusb_disconnect,
+	.id_table = ezusb_table,
+};
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+    " (Manuel Estrada Sainz)";
+
+static int __init ezusb_module_init(void)
+{
+	int err;
+
+	printk(KERN_DEBUG "%s\n", version);
+
+	/* register this driver with the USB subsystem */
+	err = usb_register(&orinoco_driver);
+	if (err < 0) {
+		printk(KERN_ERR PFX "usb_register failed, error %d\n",
+		       err);
+		return err;
+	}
+
+	return 0;
+}
+
+static void __exit ezusb_module_exit(void)
+{
+	/* deregister this driver with the USB subsystem */
+	usb_deregister(&orinoco_driver);
+}
+
+
+module_init(ezusb_module_init);
+module_exit(ezusb_module_exit);
+
+MODULE_AUTHOR("Manuel Estrada Sainz");
+MODULE_DESCRIPTION
+    ("Driver for Orinoco wireless LAN cards using EZUSB bridge");
+MODULE_LICENSE("Dual MPL/GPL");
