[3/4] rt2x00: Clean up USB vendor request buffer functions.

Message ID	1273778166-3833-4-git-send-email-gwingerde@gmail.com (mailing list archive)
State	Not Applicable, archived
Headers	show Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter.kernel.org (8.14.3/8.14.3) with ESMTP id o4DJGeO5028901 for <patchwork-linux-wireless@patchwork.kernel.org>; Thu, 13 May 2010 19:17:33 GMT From: Gertjan van Wingerde <gwingerde@gmail.com> To: "John W. Linville" <linville@tuxdriver.com> Cc: Ivo van Doorn <IvDoorn@gmail.com>, <linux-wireless@vger.kernel.org>, <users@rt2x00.serialmonkey.com>, Gertjan van Wingerde <gwingerde@gmail.com> Subject: [PATCH 3/4] rt2x00: Clean up USB vendor request buffer functions. Date: Thu, 13 May 2010 21:16:05 +0200 Message-Id: <1273778166-3833-4-git-send-email-gwingerde@gmail.com> In-Reply-To: <1273778166-3833-1-git-send-email-gwingerde@gmail.com> References: <1273778166-3833-1-git-send-email-gwingerde@gmail.com> Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk

diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index eb99934..a1af5b8 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -344,7 +344,6 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, struct rt2x00lib_crypto *crypto, struct ieee80211_key_conf *key) { - int timeout; u32 mask; u16 reg; @@ -366,18 +365,9 @@ static int rt2500usb_config_key(struct rt2x00_dev *rt2x00dev, key->hw_key_idx += reg ? ffz(reg) : 0; - /* - * The encryption key doesn't fit within the CSR cache, - * this means we should allocate it seperately and use - * rt2x00usb_vendor_request() to send the key to the hardware. - */ reg = KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(crypto->key)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, reg, - crypto->key, - sizeof(crypto->key), - timeout); + rt2500usb_register_multiwrite(rt2x00dev, reg, + crypto->key, sizeof(crypto->key)); /* * The driver does not support the IV/EIV generation diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index eaf0a7e..0f0a4f5 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -169,11 +169,8 @@ static int rt2800usb_load_firmware(struct rt2x00_dev *rt2x00dev, /* * Write firmware to device. */ - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE, - data + offset, length, - REGISTER_TIMEOUT32(length)); + rt2800_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, + data + offset, length); rt2800_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); rt2800_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); @@ -478,10 +475,8 @@ static void rt2800usb_write_beacon(struct queue_entry *entry, * Write entire beacon with descriptor to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, beacon_base, - entry->skb->data, entry->skb->len, - REGISTER_TIMEOUT32(entry->skb->len)); + rt2800_register_multiwrite(rt2x00dev, beacon_base, + entry->skb->data, entry->skb->len); /* * Enable beaconing again. diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 1f72c59..1cae159 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -112,26 +112,6 @@ int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, const u16 offset, void *buffer, const u16 buffer_length, const int timeout) { - int status; - - mutex_lock(&rt2x00dev->csr_mutex); - - status = rt2x00usb_vendor_req_buff_lock(rt2x00dev, request, - requesttype, offset, buffer, - buffer_length, timeout); - - mutex_unlock(&rt2x00dev->csr_mutex); - - return status; -} -EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); - -int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, const void *buffer, - const u16 buffer_length, - const int timeout) -{ int status = 0; unsigned char *tb; u16 off, len, bsize; @@ -156,7 +136,7 @@ int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, return status; } -EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_large_buff); +EXPORT_SYMBOL_GPL(rt2x00usb_vendor_request_buff); int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, const unsigned int offset, diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.h b/drivers/net/wireless/rt2x00/rt2x00usb.h index 621d0f8..255b81e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.h +++ b/drivers/net/wireless/rt2x00/rt2x00usb.h @@ -167,25 +167,6 @@ int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, const u16 buffer_length, const int timeout); /** - * rt2x00usb_vendor_request_large_buff - Send register command to device (buffered) - * @rt2x00dev: Pointer to &struct rt2x00_dev - * @request: USB vendor command (See &enum rt2x00usb_vendor_request) - * @requesttype: Request type &USB_VENDOR_REQUEST_* - * @offset: Register start offset to perform action on - * @buffer: Buffer where information will be read/written to by device - * @buffer_length: Size of &buffer - * @timeout: Operation timeout - * - * This function is used to transfer register data in blocks larger - * then CSR_CACHE_SIZE. Use for firmware upload, keys and beacons. - */ -int rt2x00usb_vendor_request_large_buff(struct rt2x00_dev *rt2x00dev, - const u8 request, const u8 requesttype, - const u16 offset, const void *buffer, - const u16 buffer_length, - const int timeout); - -/** * rt2x00usb_vendor_request_sw - Send single register command to device * @rt2x00dev: Pointer to &struct rt2x00_dev * @request: USB vendor command (See &enum rt2x00usb_vendor_request) diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index dc4a028..2f7e0ce 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -269,7 +269,6 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, { struct hw_key_entry key_entry; struct rt2x00_field32 field; - int timeout; u32 mask; u32 reg; @@ -305,12 +304,8 @@ static int rt73usb_config_shared_key(struct rt2x00_dev *rt2x00dev, sizeof(key_entry.rx_mic)); reg = SHARED_KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, reg, - &key_entry, - sizeof(key_entry), - timeout); + rt2x00usb_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); /* * The cipher types are stored over 2 registers. @@ -371,7 +366,6 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, { struct hw_pairwise_ta_entry addr_entry; struct hw_key_entry key_entry; - int timeout; u32 mask; u32 reg; @@ -406,17 +400,11 @@ static int rt73usb_config_pairwise_key(struct rt2x00_dev *rt2x00dev, sizeof(key_entry.rx_mic)); reg = PAIRWISE_KEY_ENTRY(key->hw_key_idx); - timeout = REGISTER_TIMEOUT32(sizeof(key_entry)); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, reg, - &key_entry, - sizeof(key_entry), - timeout); + rt2x00usb_register_multiwrite(rt2x00dev, reg, + &key_entry, sizeof(key_entry)); /* * Send the address and cipher type to the hardware register. - * This data fits within the CSR cache size, so we can use - * rt2x00usb_register_multiwrite() directly. */ memset(&addr_entry, 0, sizeof(addr_entry)); memcpy(&addr_entry, crypto->address, ETH_ALEN); @@ -1091,11 +1079,7 @@ static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, /* * Write firmware to device. */ - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, - FIRMWARE_IMAGE_BASE, - data, len, - REGISTER_TIMEOUT32(len)); + rt2x00usb_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, data, len); /* * Send firmware request to device to load firmware, @@ -1547,10 +1531,8 @@ static void rt73usb_write_beacon(struct queue_entry *entry, * Write entire beacon with descriptor to register. */ beacon_base = HW_BEACON_OFFSET(entry->entry_idx); - rt2x00usb_vendor_request_large_buff(rt2x00dev, USB_MULTI_WRITE, - USB_VENDOR_REQUEST_OUT, beacon_base, - entry->skb->data, entry->skb->len, - REGISTER_TIMEOUT32(entry->skb->len)); + rt2x00usb_register_multiwrite(rt2x00dev, beacon_base, + entry->skb->data, entry->skb->len); /* * Enable beaconing again.

[3/4] rt2x00: Clean up USB vendor request buffer functions.

Commit Message

Patch