diff mbox

[v2,11/20] omap: hsmmc: support mmc3 regulator power control

Message ID 1279733634-21974-12-git-send-email-ohad@wizery.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Ohad Ben Cohen July 21, 2010, 5:33 p.m. UTC
None
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 1ef54b0..5d3d789 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -174,7 +174,7 @@  static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot,
 	}
 }
 
-static void hsmmc23_before_set_reg(struct device *dev, int slot,
+static void hsmmc2_before_set_reg(struct device *dev, int slot,
 				   int power_on, int vdd)
 {
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
@@ -325,14 +325,16 @@  void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers)
 				c->transceiver = 1;
 			if (c->transceiver && c->wires > 4)
 				c->wires = 4;
-			/* FALLTHROUGH */
-		case 3:
 			if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
 				/* off-chip level shifting, or none */
-				mmc->slots[0].before_set_reg = hsmmc23_before_set_reg;
+				mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
 				mmc->slots[0].after_set_reg = NULL;
 			}
 			break;
+		case 3:
+			mmc->slots[0].before_set_reg = NULL;
+			mmc->slots[0].after_set_reg = NULL;
+			break;
 		default:
 			pr_err("MMC%d configuration not supported!\n", c->mmc);
 			kfree(mmc);
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index b032828..4c5a669 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -258,7 +258,7 @@  static int omap_hsmmc_1_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
-static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
+static int omap_hsmmc_2_set_power(struct device *dev, int slot, int power_on,
 				   int vdd)
 {
 	struct omap_hsmmc_host *host =
@@ -309,6 +309,31 @@  static int omap_hsmmc_23_set_power(struct device *dev, int slot, int power_on,
 	return ret;
 }
 
+static int omap_hsmmc_3_set_power(struct device *dev, int slot, int power_on,
+				   int vdd)
+{
+	struct omap_hsmmc_host *host =
+		platform_get_drvdata(to_platform_device(dev));
+	int ret = 0;
+
+	if (power_on) {
+		ret = mmc_regulator_set_ocr(host->vcc, vdd);
+		/* Enable interface voltage rail, if needed */
+		if (ret == 0 && host->vcc) {
+			ret = regulator_enable(host->vcc);
+			if (ret < 0)
+				ret = mmc_regulator_set_ocr(host->vcc, 0);
+		}
+	} else {
+		if (host->vcc)
+			ret = regulator_disable(host->vcc);
+		if (ret == 0)
+			ret = mmc_regulator_set_ocr(host->vcc, 0);
+	}
+
+	return ret;
+}
+
 static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
 				  int vdd, int cardsleep)
 {
@@ -319,7 +344,7 @@  static int omap_hsmmc_1_set_sleep(struct device *dev, int slot, int sleep,
 	return regulator_set_mode(host->vcc, mode);
 }
 
-static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
+static int omap_hsmmc_2_set_sleep(struct device *dev, int slot, int sleep,
 				   int vdd, int cardsleep)
 {
 	struct omap_hsmmc_host *host =
@@ -358,6 +383,31 @@  static int omap_hsmmc_23_set_sleep(struct device *dev, int slot, int sleep,
 		return regulator_enable(host->vcc_aux);
 }
 
+static int omap_hsmmc_3_set_sleep(struct device *dev, int slot, int sleep,
+				   int vdd, int cardsleep)
+{
+	struct omap_hsmmc_host *host =
+		platform_get_drvdata(to_platform_device(dev));
+	int err = 0;
+
+	/*
+	 * If we don't see a Vcc regulator, assume it's a fixed
+	 * voltage always-on regulator.
+	 */
+	if (!host->vcc)
+		return 0;
+
+	if (cardsleep) {
+		/* VCC can be turned off if card is asleep */
+		if (sleep)
+			err = mmc_regulator_set_ocr(host->vcc, 0);
+		else
+			err = mmc_regulator_set_ocr(host->vcc, vdd);
+	}
+
+	return err;
+}
+
 static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 {
 	struct regulator *reg;
@@ -370,10 +420,13 @@  static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 		mmc_slot(host).set_sleep = omap_hsmmc_1_set_sleep;
 		break;
 	case OMAP_MMC2_DEVID:
-	case OMAP_MMC3_DEVID:
 		/* Off-chip level shifting, or none */
-		mmc_slot(host).set_power = omap_hsmmc_23_set_power;
-		mmc_slot(host).set_sleep = omap_hsmmc_23_set_sleep;
+		mmc_slot(host).set_power = omap_hsmmc_2_set_power;
+		mmc_slot(host).set_sleep = omap_hsmmc_2_set_sleep;
+		break;
+	case OMAP_MMC3_DEVID:
+		mmc_slot(host).set_power = omap_hsmmc_3_set_power;
+		mmc_slot(host).set_sleep = omap_hsmmc_3_set_sleep;
 		break;
 	default:
 		pr_err("MMC%d configuration not supported!\n", host->id);
@@ -386,9 +439,9 @@  static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
 		/*
 		* HACK: until fixed.c regulator is usable,
 		* we don't require a main regulator
-		* for MMC2 or MMC3
+		* for MMC2
 		*/
-		if (host->id == OMAP_MMC1_DEVID) {
+		if (host->id != OMAP_MMC2_DEVID) {
 			ret = PTR_ERR(reg);
 			goto err;
 		}