@@ -7,7 +7,6 @@
*/
#include <linux/slab.h>
-#include <linux/if_arp.h>
#include <linux/ieee80211.h>
#include <net/cfg80211.h>
#include <asm/unaligned.h>
@@ -1383,56 +1382,6 @@ static int lbs_cfg_del_key(struct wiphy *wiphy, struct net_device *netdev,
}
-
-/***************************************************************************
- * Monitor mode
- */
-
-/* like "struct cmd_ds_802_11_monitor_mode", but with cmd_header. Once we
- * get rid of WEXT, this should go into host.h */
-struct cmd_monitor_mode {
- struct cmd_header hdr;
-
- __le16 action;
- __le16 mode;
-} __packed;
-
-static int lbs_enable_monitor_mode(struct lbs_private *priv, int mode)
-{
- struct cmd_monitor_mode cmd;
- int ret;
-
- lbs_deb_enter(LBS_DEB_CFG80211);
-
- /*
- * cmd 98 00
- * size 0c 00
- * sequence xx xx
- * result 00 00
- * action 01 00 ACT_SET
- * enable 01 00
- */
- memset(&cmd, 0, sizeof(cmd));
- cmd.hdr.size = cpu_to_le16(sizeof(cmd));
- cmd.action = cpu_to_le16(CMD_ACT_SET);
- cmd.mode = cpu_to_le16(mode);
-
- ret = lbs_cmd_with_response(priv, CMD_802_11_MONITOR_MODE, &cmd);
-
- if (ret == 0)
- priv->dev->type = ARPHRD_IEEE80211_RADIOTAP;
- else
- priv->dev->type = ARPHRD_ETHER;
-
- lbs_deb_leave(LBS_DEB_CFG80211);
- return ret;
-}
-
-
-
-
-
-
/***************************************************************************
* Get station
*/
@@ -1558,17 +1507,17 @@ static int lbs_change_intf(struct wiphy *wiphy, struct net_device *dev,
switch (type) {
case NL80211_IFTYPE_MONITOR:
- ret = lbs_enable_monitor_mode(priv, 1);
+ ret = lbs_set_monitor_mode(priv, 1);
break;
case NL80211_IFTYPE_STATION:
if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR)
- ret = lbs_enable_monitor_mode(priv, 0);
+ ret = lbs_set_monitor_mode(priv, 0);
if (!ret)
ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 1);
break;
case NL80211_IFTYPE_ADHOC:
if (priv->wdev->iftype == NL80211_IFTYPE_MONITOR)
- ret = lbs_enable_monitor_mode(priv, 0);
+ ret = lbs_set_monitor_mode(priv, 0);
if (!ret)
ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, 2);
break;
@@ -6,6 +6,7 @@
#include <linux/kfifo.h>
#include <linux/sched.h>
#include <linux/slab.h>
+#include <linux/if_arp.h>
#include "decl.h"
#include "cfg.h"
@@ -576,23 +577,35 @@ int lbs_set_tx_power(struct lbs_private *priv, s16 dbm)
return ret;
}
-static int lbs_cmd_802_11_monitor_mode(struct cmd_ds_command *cmd,
- u16 cmd_action, void *pdata_buf)
+/**
+ * @brief Enable or disable monitor mode (only implemented on OLPC usb8388 FW)
+ *
+ * @param priv A pointer to struct lbs_private structure
+ * @param enable 1 to enable monitor mode, 0 to disable
+ *
+ * @return 0 on success, error on failure
+ */
+int lbs_set_monitor_mode(struct lbs_private *priv, int enable)
{
- struct cmd_ds_802_11_monitor_mode *monitor = &cmd->params.monitor;
+ struct cmd_ds_802_11_monitor_mode cmd;
+ int ret;
- cmd->command = cpu_to_le16(CMD_802_11_MONITOR_MODE);
- cmd->size =
- cpu_to_le16(sizeof(struct cmd_ds_802_11_monitor_mode) +
- sizeof(struct cmd_header));
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+ cmd.action = cpu_to_le16(CMD_ACT_SET);
+ if (enable)
+ cmd.mode = cpu_to_le16(0x1);
- monitor->action = cpu_to_le16(cmd_action);
- if (cmd_action == CMD_ACT_SET) {
- monitor->mode =
- cpu_to_le16((u16) (*(u32 *) pdata_buf));
+ lbs_deb_cmd("SET_MONITOR_MODE: %d\n", enable);
+
+ ret = lbs_cmd_with_response(priv, CMD_802_11_MONITOR_MODE, &cmd);
+ if (ret == 0) {
+ priv->dev->type = enable ? ARPHRD_IEEE80211_RADIOTAP :
+ ARPHRD_ETHER;
}
- return 0;
+ lbs_deb_leave(LBS_DEB_CMD);
+ return ret;
}
/**
@@ -1093,11 +1106,6 @@ int lbs_prepare_and_send_command(struct lbs_private *priv,
ret = lbs_cmd_reg_access(cmdptr, cmd_action, pdata_buf);
break;
- case CMD_802_11_MONITOR_MODE:
- ret = lbs_cmd_802_11_monitor_mode(cmdptr,
- cmd_action, pdata_buf);
- break;
-
case CMD_802_11_RSSI:
ret = lbs_cmd_802_11_rssi(priv, cmdptr);
break;
@@ -129,4 +129,6 @@ int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep);
int lbs_set_host_sleep(struct lbs_private *priv, int host_sleep);
+int lbs_set_monitor_mode(struct lbs_private *priv, int enable);
+
#endif /* _LBS_CMD_H */
@@ -675,7 +675,10 @@ struct cmd_ds_802_11_rf_tx_power {
s8 minlevel;
} __attribute__ ((packed));
+/* MONITOR_MODE only exists in OLPC v5 firmware */
struct cmd_ds_802_11_monitor_mode {
+ struct cmd_header hdr;
+
__le16 action;
__le16 mode;
} __attribute__ ((packed));
@@ -966,7 +969,6 @@ struct cmd_ds_command {
/* command Body */
union {
struct cmd_ds_802_11_ps_mode psmode;
- struct cmd_ds_802_11_monitor_mode monitor;
struct cmd_ds_802_11_rssi rssi;
struct cmd_ds_802_11_rssi_rsp rssirsp;
struct cmd_ds_mac_reg_access macreg;