@@ -2328,16 +2328,52 @@ u8 ar6000_endpoint_id2_ac(void * devt, HTC_ENDPOINT_ID ep )
return(arEndpoint2Ac(ar, ep ));
}
+#if defined(CONFIG_ATH6KL_ENABLE_COEXISTENCE)
+static int ath6kl_config_btcoex_params(struct ar6_softc *ar)
+{
+ int r;
+ WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD sbcb_cmd;
+ WMI_SET_BTCOEX_FE_ANT_CMD sbfa_cmd;
+
+ /* Configure the type of BT collocated with WLAN */
+ memset(&sbcb_cmd, 0, sizeof(WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD));
+ sbcb_cmd.btcoexCoLocatedBTdev = ATH6KL_BT_DEV;
+
+ r = wmi_set_btcoex_colocated_bt_dev_cmd(ar->arWmi, &sbcb_cmd);
+
+ if (r) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Unable to set collocated BT type\n"));
+ return r;
+ }
+
+ /* Configure the type of BT collocated with WLAN */
+ memset(&sbfa_cmd, 0, sizeof(WMI_SET_BTCOEX_FE_ANT_CMD));
+
+ sbfa_cmd.btcoexFeAntType = ATH6KL_BT_ANTENNA;
+
+ r = wmi_set_btcoex_fe_ant_cmd(ar->arWmi, &sbfa_cmd);
+ if (r) {
+ AR_DEBUG_PRINTF(ATH_DEBUG_ERR,
+ ("Unable to set fornt end antenna configuration\n"));
+ return r;
+ }
+
+ return 0;
+}
+#else
+static int ath6kl_config_btcoex_params(struct ar6_softc *ar)
+{
+ return 0;
+}
+#endif /* CONFIG_ATH6KL_ENABLE_COEXISTENCE */
+
/*
* This function applies WLAN specific configuration defined in wlan_config.h
*/
int ar6000_target_config_wlan_params(struct ar6_softc *ar)
{
int status = 0;
-#if defined(CONFIG_ATH6KL_ENABLE_COEXISTENCE)
- WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD sbcb_cmd;
- WMI_SET_BTCOEX_FE_ANT_CMD sbfa_cmd;
-#endif /* CONFIG_ATH6KL_ENABLE_COEXISTENCE */
#ifdef CONFIG_HOST_TCMD_SUPPORT
if (ar->arTargetMode != AR6000_WLAN_MODE) {
@@ -2355,39 +2391,9 @@ int ar6000_target_config_wlan_params(struct ar6_softc *ar)
status = A_ERROR;
}
-#if defined(CONFIG_ATH6KL_ENABLE_COEXISTENCE)
- /* Configure the type of BT collocated with WLAN */
- memset(&sbcb_cmd, 0, sizeof(WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD));
-#ifdef CONFIG_AR600x_BT_QCOM
- sbcb_cmd.btcoexCoLocatedBTdev = 1;
-#elif defined(CONFIG_AR600x_BT_CSR)
- sbcb_cmd.btcoexCoLocatedBTdev = 2;
-#elif defined(CONFIG_AR600x_BT_AR3001)
- sbcb_cmd.btcoexCoLocatedBTdev = 3;
-#else
-#error Unsupported Bluetooth Type
-#endif /* Collocated Bluetooth Type */
-
- if ((wmi_set_btcoex_colocated_bt_dev_cmd(ar->arWmi, &sbcb_cmd)) != 0) {
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set collocated BT type\n"));
- status = A_ERROR;
- }
-
- /* Configure the type of BT collocated with WLAN */
- memset(&sbfa_cmd, 0, sizeof(WMI_SET_BTCOEX_FE_ANT_CMD));
-#ifdef CONFIG_AR600x_DUAL_ANTENNA
- sbfa_cmd.btcoexFeAntType = 2;
-#elif defined(CONFIG_AR600x_SINGLE_ANTENNA)
- sbfa_cmd.btcoexFeAntType = 1;
-#else
-#error Unsupported Front-End Antenna Configuration
-#endif /* AR600x Front-End Antenna Configuration */
-
- if ((wmi_set_btcoex_fe_ant_cmd(ar->arWmi, &sbfa_cmd)) != 0) {
- AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set fornt end antenna configuration\n"));
- status = A_ERROR;
- }
-#endif /* CONFIG_ATH6KL_ENABLE_COEXISTENCE */
+ status = ath6kl_config_btcoex_params(ar);
+ if (status)
+ return status;
#if WLAN_CONFIG_IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN
if ((wmi_pmparams_cmd(ar->arWmi, 0, 1, 0, 0, 1, IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN)) != 0) {
@@ -228,6 +228,25 @@ typedef enum _AR6K_BIN_FILE {
#define NOHIFSCATTERSUPPORT_DEFAULT 0
#endif /* ATH6K_CONFIG_HIF_VIRTUAL_SCATTER */
+
+#if defined(CONFIG_ATH6KL_ENABLE_COEXISTENCE)
+
+#ifdef CONFIG_AR600x_BT_QCOM
+#define ATH6KL_BT_DEV 1
+#elif defined(CONFIG_AR600x_BT_CSR)
+#define ATH6KL_BT_DEV 2
+#else
+#define ATH6KL_BT_DEV 3
+#endif
+
+#ifdef CONFIG_AR600x_DUAL_ANTENNA
+#define ATH6KL_BT_ANTENNA 2
+#else
+#define ATH6KL_BT_ANTENNA 1
+#endif
+
+#endif /* CONFIG_ATH6KL_ENABLE_COEXISTENCE */
+
#ifdef AR600x_BT_AR3001
#define AR3KHCIBAUD_DEFAULT 3000000
#define HCIUARTSCALE_DEFAULT 1