nl80211: Move peer link state definition to nl80211

Message ID	1305308743-30048-1-git-send-email-javier@cozybit.com (mailing list archive)
State	Not Applicable, archived
Headers	show Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by demeter1.kernel.org (8.14.4/8.14.3) with ESMTP id p4DHk069006527 for <patchwork-linux-wireless@patchwork.kernel.org>; Fri, 13 May 2011 17:46:00 GMT From: Javier Cardona <javier@cozybit.com> To: "John W. Linville" <linville@tuxdriver.com> Cc: Javier Cardona <javier@cozybit.com>, Thomas Pedersen <thomas@cozybit.com>, devel@lists.open80211s.org, Johannes Berg <johannes@sipsolutions.net>, linux-wireless@vger.kernel.org, jlopex@gmail.com Subject: [PATCH] nl80211: Move peer link state definition to nl80211 Date: Fri, 13 May 2011 10:45:43 -0700 Message-Id: <1305308743-30048-1-git-send-email-javier@cozybit.com> Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk

diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 9f2c8f2..0948d55 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -940,9 +940,10 @@ enum nl80211_commands { * @NL80211_ATTR_SUPPORT_MESH_AUTH: Currently, this means the underlying driver * allows auth frames in a mesh to be passed to userspace for processing via * the @NL80211_MESH_SETUP_USERSPACE_AUTH flag. - * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link. Used when - * userspace is driving the peer link management state machine. - * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. + * @NL80211_ATTR_STA_PLINK_STATE: The state of a mesh peer link as + * defined in &enum nl80211_plink_state. Used when userspace is + * driving the peer link management state machine. + * @NL80211_MESH_SETUP_USERSPACE_AMPE must be enabled. * * @NL80211_ATTR_WOWLAN_SUPPORTED: indicates, as part of the wiphy capabilities, * the supported WoWLAN triggers @@ -1350,6 +1351,7 @@ enum nl80211_sta_bss_param { * @NL80211_STA_INFO_LLID: the station's mesh LLID * @NL80211_STA_INFO_PLID: the station's mesh PLID * @NL80211_STA_INFO_PLINK_STATE: peer link state for the station + * (see %enum nl80211_plink_state) * @NL80211_STA_INFO_RX_BITRATE: last unicast data frame rx rate, nested * attribute, like NL80211_STA_INFO_TX_BITRATE. * @NL80211_STA_INFO_BSS_PARAM: current station's view of BSS, nested attribute @@ -2206,4 +2208,37 @@ enum nl80211_wowlan_triggers { MAX_NL80211_WOWLAN_TRIG = NUM_NL80211_WOWLAN_TRIG - 1 }; + +/** + * enum nl80211_plink_state - state of a mesh peer link finite state machine + * + * @NL80211_PLINK_LISTEN: initial state, considered the implicit + * state of non existant mesh peer links + * @NL80211_PLINK_OPN_SNT: mesh plink open frame has been sent to + * this mesh peer + * @NL80211_PLINK_OPN_RCVD: mesh plink open frame has been received + * from this mesh peer + * @NL80211_PLINK_CNF_RCVD: mesh plink confirm frame has been + * received from this mesh peer + * @NL80211_PLINK_ESTAB: mesh peer link is established + * @NL80211_PLINK_HOLDING: mesh peer link is being closed or cancelled + * @NL80211_PLINK_BLOCKED: all frames transmitted from this mesh + * plink are discarded + * @NUM_NL80211_PLINK_STATES: number of peer link states + * @MAX_NL80211_PLINK_STATES: highest numerical value of plink states + */ +enum nl80211_plink_state { + NL80211_PLINK_LISTEN, + NL80211_PLINK_OPN_SNT, + NL80211_PLINK_OPN_RCVD, + NL80211_PLINK_CNF_RCVD, + NL80211_PLINK_ESTAB, + NL80211_PLINK_HOLDING, + NL80211_PLINK_BLOCKED, + + /* keep last */ + NUM_NL80211_PLINK_STATES, + MAX_NL80211_PLINK_STATES = NUM_NL80211_PLINK_STATES - 1 +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index e1f1b41..6416f53 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -372,33 +372,6 @@ enum plink_actions { }; /** - * enum plink_states - state of a mesh peer link finite state machine - * - * @PLINK_LISTEN: initial state, considered the implicit state of non - * existant mesh peer links - * @PLINK_OPN_SNT: mesh plink open frame has been sent to this mesh - * peer @PLINK_OPN_RCVD: mesh plink open frame has been received from - * this mesh peer - * @PLINK_CNF_RCVD: mesh plink confirm frame has been received from - * this mesh peer - * @PLINK_ESTAB: mesh peer link is established - * @PLINK_HOLDING: mesh peer link is being closed or cancelled - * @PLINK_BLOCKED: all frames transmitted from this mesh plink are - * discarded - * @PLINK_INVALID: reserved - */ -enum plink_state { - PLINK_LISTEN, - PLINK_OPN_SNT, - PLINK_OPN_RCVD, - PLINK_CNF_RCVD, - PLINK_ESTAB, - PLINK_HOLDING, - PLINK_BLOCKED, - PLINK_INVALID, -}; - -/** * struct station_parameters - station parameters * * Used to change and create a new station. diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 2d1c1a5..008cca1 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -733,9 +733,9 @@ static void sta_apply_parameters(struct ieee80211_local *local, #ifdef CONFIG_MAC80211_MESH if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) switch (params->plink_state) { - case PLINK_LISTEN: - case PLINK_ESTAB: - case PLINK_BLOCKED: + case NL80211_PLINK_LISTEN: + case NL80211_PLINK_ESTAB: + case NL80211_PLINK_BLOCKED: sta->plink_state = params->plink_state; break; default: diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 2c37bee..f4adc09 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -83,7 +83,7 @@ void mesh_plink_dec_estab_count(struct ieee80211_sub_if_data *sdata) */ static inline void mesh_plink_fsm_restart(struct sta_info *sta) { - sta->plink_state = PLINK_LISTEN; + sta->plink_state = NL80211_PLINK_LISTEN; sta->llid = sta->plid = sta->reason = 0; sta->plink_retries = 0; } @@ -126,11 +126,11 @@ static bool __mesh_plink_deactivate(struct sta_info *sta) struct ieee80211_sub_if_data *sdata = sta->sdata; bool deactivated = false; - if (sta->plink_state == PLINK_ESTAB) { + if (sta->plink_state == NL80211_PLINK_ESTAB) { mesh_plink_dec_estab_count(sdata); deactivated = true; } - sta->plink_state = PLINK_BLOCKED; + sta->plink_state = NL80211_PLINK_BLOCKED; mesh_path_flush_by_nexthop(sta); return deactivated; @@ -268,7 +268,7 @@ void mesh_neighbour_update(u8 *hw_addr, u32 rates, sta->last_rx = jiffies; sta->sta.supp_rates[local->hw.conf.channel->band] = rates; if (mesh_peer_accepts_plinks(elems) && - sta->plink_state == PLINK_LISTEN && + sta->plink_state == NL80211_PLINK_LISTEN && sdata->u.mesh.accepting_plinks && sdata->u.mesh.mshcfg.auto_open_plinks) mesh_plink_open(sta); @@ -308,8 +308,8 @@ static void mesh_plink_timer(unsigned long data) sdata = sta->sdata; switch (sta->plink_state) { - case PLINK_OPN_RCVD: - case PLINK_OPN_SNT: + case NL80211_PLINK_OPN_RCVD: + case NL80211_PLINK_OPN_SNT: /* retry timer */ if (sta->plink_retries < dot11MeshMaxRetries(sdata)) { u32 rand; @@ -328,17 +328,17 @@ static void mesh_plink_timer(unsigned long data) } reason = cpu_to_le16(MESH_MAX_RETRIES); /* fall through on else */ - case PLINK_CNF_RCVD: + case NL80211_PLINK_CNF_RCVD: /* confirm timer */ if (!reason) reason = cpu_to_le16(MESH_CONFIRM_TIMEOUT); - sta->plink_state = PLINK_HOLDING; + sta->plink_state = NL80211_PLINK_HOLDING; mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)); spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, PLINK_CLOSE, sta->sta.addr, llid, plid, reason); break; - case PLINK_HOLDING: + case NL80211_PLINK_HOLDING: /* holding timer */ del_timer(&sta->plink_timer); mesh_plink_fsm_restart(sta); @@ -386,11 +386,11 @@ int mesh_plink_open(struct sta_info *sta) spin_lock_bh(&sta->lock); get_random_bytes(&llid, 2); sta->llid = llid; - if (sta->plink_state != PLINK_LISTEN) { + if (sta->plink_state != NL80211_PLINK_LISTEN) { spin_unlock_bh(&sta->lock); return -EBUSY; } - sta->plink_state = PLINK_OPN_SNT; + sta->plink_state = NL80211_PLINK_OPN_SNT; mesh_plink_timer_set(sta, dot11MeshRetryTimeout(sdata)); spin_unlock_bh(&sta->lock); mpl_dbg("Mesh plink: starting establishment with %pM\n", @@ -407,7 +407,7 @@ void mesh_plink_block(struct sta_info *sta) spin_lock_bh(&sta->lock); deactivated = __mesh_plink_deactivate(sta); - sta->plink_state = PLINK_BLOCKED; + sta->plink_state = NL80211_PLINK_BLOCKED; spin_unlock_bh(&sta->lock); if (deactivated) @@ -430,13 +430,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m __le16 plid, llid, reason; #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG static const char *mplstates[] = { - [PLINK_LISTEN] = "LISTEN", - [PLINK_OPN_SNT] = "OPN-SNT", - [PLINK_OPN_RCVD] = "OPN-RCVD", - [PLINK_CNF_RCVD] = "CNF_RCVD", - [PLINK_ESTAB] = "ESTAB", - [PLINK_HOLDING] = "HOLDING", - [PLINK_BLOCKED] = "BLOCKED" + [NL80211_PLINK_LISTEN] = "LISTEN", + [NL80211_PLINK_OPN_SNT] = "OPN-SNT", + [NL80211_PLINK_OPN_RCVD] = "OPN-RCVD", + [NL80211_PLINK_CNF_RCVD] = "CNF_RCVD", + [NL80211_PLINK_ESTAB] = "ESTAB", + [NL80211_PLINK_HOLDING] = "HOLDING", + [NL80211_PLINK_BLOCKED] = "BLOCKED" }; #endif @@ -502,7 +502,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m return; } - if (sta && sta->plink_state == PLINK_BLOCKED) { + if (sta && sta->plink_state == NL80211_PLINK_BLOCKED) { rcu_read_unlock(); return; } @@ -572,7 +572,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m event = CNF_ACPT; break; case PLINK_CLOSE: - if (sta->plink_state == PLINK_ESTAB) + if (sta->plink_state == NL80211_PLINK_ESTAB) /* Do not check for llid or plid. This does not * follow the standard but since multiple plinks * per sta are not supported, it is necessary in @@ -607,14 +607,14 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m reason = 0; switch (sta->plink_state) { /* spin_unlock as soon as state is updated at each case */ - case PLINK_LISTEN: + case NL80211_PLINK_LISTEN: switch (event) { case CLS_ACPT: mesh_plink_fsm_restart(sta); spin_unlock_bh(&sta->lock); break; case OPN_ACPT: - sta->plink_state = PLINK_OPN_RCVD; + sta->plink_state = NL80211_PLINK_OPN_RCVD; sta->plid = plid; get_random_bytes(&llid, 2); sta->llid = llid; @@ -631,7 +631,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m } break; - case PLINK_OPN_SNT: + case NL80211_PLINK_OPN_SNT: switch (event) { case OPN_RJCT: case CNF_RJCT: @@ -640,7 +640,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m if (!reason) reason = cpu_to_le16(MESH_CLOSE_RCVD); sta->reason = reason; - sta->plink_state = PLINK_HOLDING; + sta->plink_state = NL80211_PLINK_HOLDING; if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) sta->ignore_plink_timer = true; @@ -652,7 +652,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m break; case OPN_ACPT: /* retry timer is left untouched */ - sta->plink_state = PLINK_OPN_RCVD; + sta->plink_state = NL80211_PLINK_OPN_RCVD; sta->plid = plid; llid = sta->llid; spin_unlock_bh(&sta->lock); @@ -660,7 +660,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m plid, 0); break; case CNF_ACPT: - sta->plink_state = PLINK_CNF_RCVD; + sta->plink_state = NL80211_PLINK_CNF_RCVD; if (!mod_plink_timer(sta, dot11MeshConfirmTimeout(sdata))) sta->ignore_plink_timer = true; @@ -673,7 +673,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m } break; - case PLINK_OPN_RCVD: + case NL80211_PLINK_OPN_RCVD: switch (event) { case OPN_RJCT: case CNF_RJCT: @@ -682,7 +682,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m if (!reason) reason = cpu_to_le16(MESH_CLOSE_RCVD); sta->reason = reason; - sta->plink_state = PLINK_HOLDING; + sta->plink_state = NL80211_PLINK_HOLDING; if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) sta->ignore_plink_timer = true; @@ -700,7 +700,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m break; case CNF_ACPT: del_timer(&sta->plink_timer); - sta->plink_state = PLINK_ESTAB; + sta->plink_state = NL80211_PLINK_ESTAB; spin_unlock_bh(&sta->lock); mesh_plink_inc_estab_count(sdata); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); @@ -713,7 +713,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m } break; - case PLINK_CNF_RCVD: + case NL80211_PLINK_CNF_RCVD: switch (event) { case OPN_RJCT: case CNF_RJCT: @@ -722,7 +722,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m if (!reason) reason = cpu_to_le16(MESH_CLOSE_RCVD); sta->reason = reason; - sta->plink_state = PLINK_HOLDING; + sta->plink_state = NL80211_PLINK_HOLDING; if (!mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata))) sta->ignore_plink_timer = true; @@ -734,7 +734,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m break; case OPN_ACPT: del_timer(&sta->plink_timer); - sta->plink_state = PLINK_ESTAB; + sta->plink_state = NL80211_PLINK_ESTAB; spin_unlock_bh(&sta->lock); mesh_plink_inc_estab_count(sdata); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); @@ -749,13 +749,13 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m } break; - case PLINK_ESTAB: + case NL80211_PLINK_ESTAB: switch (event) { case CLS_ACPT: reason = cpu_to_le16(MESH_CLOSE_RCVD); sta->reason = reason; deactivated = __mesh_plink_deactivate(sta); - sta->plink_state = PLINK_HOLDING; + sta->plink_state = NL80211_PLINK_HOLDING; llid = sta->llid; mod_plink_timer(sta, dot11MeshHoldingTimeout(sdata)); spin_unlock_bh(&sta->lock); @@ -775,7 +775,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m break; } break; - case PLINK_HOLDING: + case NL80211_PLINK_HOLDING: switch (event) { case CLS_ACPT: if (del_timer(&sta->plink_timer)) diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index b6bde2e..5b2d6f4 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -490,7 +490,7 @@ ieee80211_rx_mesh_check(struct ieee80211_rx_data *rx) * establisment frame, beacon or probe, drop the frame. */ - if (!rx->sta || sta_plink_state(rx->sta) != PLINK_ESTAB) { + if (!rx->sta || sta_plink_state(rx->sta) != NL80211_PLINK_ESTAB) { struct ieee80211_mgmt *mgmt; if (!ieee80211_is_mgmt(hdr->frame_control)) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 9d04129..7f58220 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -274,7 +274,7 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */ #ifdef CONFIG_MAC80211_MESH - sta->plink_state = PLINK_LISTEN; + sta->plink_state = NL80211_PLINK_LISTEN; init_timer(&sta->plink_timer); #endif diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index f00b4dc..b5fd9c5 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -316,7 +316,7 @@ struct sta_info { u8 plink_retries; bool ignore_plink_timer; bool plink_timer_was_running; - enum plink_state plink_state; + enum nl80211_plink_state plink_state; u32 plink_timeout; struct timer_list plink_timer; #endif @@ -334,12 +334,12 @@ struct sta_info { struct ieee80211_sta sta; }; -static inline enum plink_state sta_plink_state(struct sta_info *sta) +static inline enum nl80211_plink_state sta_plink_state(struct sta_info *sta) { #ifdef CONFIG_MAC80211_MESH return sta->plink_state; #endif - return PLINK_LISTEN; + return NL80211_PLINK_LISTEN; } static inline void set_sta_flags(struct sta_info *sta, const u32 flags) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 9ef8e28..03f9a60 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -2258,7 +2258,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) memset(&params, 0, sizeof(params)); params.listen_interval = -1; - params.plink_state = PLINK_INVALID; + params.plink_state = -1; if (info->attrs[NL80211_ATTR_STA_AID]) return -EINVAL;

nl80211: Move peer link state definition to nl80211

Commit Message

Patch