@@ -1331,7 +1331,6 @@ struct ath5k_hw {
unsigned int nexttbtt; /* next beacon time in TU */
struct ath5k_txq *cabq; /* content after beacon */
- int power_level; /* Requested tx power in dBm */
bool assoc; /* associate state */
bool enable_beacon; /* true if beacons are on */
@@ -1425,6 +1424,7 @@ struct ath5k_hw {
/* Value in dB units */
s16 txp_cck_ofdm_pwr_delta;
bool txp_setup;
+ int txp_requested; /* Requested tx power in dBm */
} ah_txpower;
struct ath5k_nfcal_hist ah_nfcal_hist;
@@ -723,7 +723,7 @@ ath5k_txbuf_setup(struct ath5k_hw *ah, struct ath5k_buf *bf,
ret = ah->ah_setup_tx_desc(ah, ds, pktlen,
ieee80211_get_hdrlen_from_skb(skb), padsize,
get_hw_packet_type(skb),
- (ah->power_level * 2),
+ (ah->ah_txpower.txp_requested * 2),
hw_rate,
info->control.rates[0].count, keyidx, ah->ah_tx_ant, flags,
cts_rate, duration);
@@ -1778,7 +1778,8 @@ ath5k_beacon_setup(struct ath5k_hw *ah, struct ath5k_buf *bf)
ds->ds_data = bf->skbaddr;
ret = ah->ah_setup_tx_desc(ah, ds, skb->len,
ieee80211_get_hdrlen_from_skb(skb), padsize,
- AR5K_PKT_TYPE_BEACON, (ah->power_level * 2),
+ AR5K_PKT_TYPE_BEACON,
+ (ah->ah_txpower.txp_requested * 2),
ieee80211_get_tx_rate(ah->hw, info)->hw_value,
1, AR5K_TXKEYIX_INVALID,
antenna, flags, 0, 0);
@@ -207,8 +207,8 @@ ath5k_config(struct ieee80211_hw *hw, u32 changed)
}
if ((changed & IEEE80211_CONF_CHANGE_POWER) &&
- (ah->power_level != conf->power_level)) {
- ah->power_level = conf->power_level;
+ (ah->ah_txpower.txp_requested != conf->power_level)) {
+ ah->ah_txpower.txp_requested = conf->power_level;
/* Half dB steps */
ath5k_hw_set_txpower_limit(ah, (conf->power_level * 2));
@@ -3802,8 +3802,9 @@ ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
* RF buffer settings on 5211/5212+ so that we
* properly set curve indices.
*/
- ret = ath5k_hw_txpower(ah, channel, ah->power_level ?
- ah->power_level * 2 : AR5K_TUNE_MAX_TXPOWER);
+ ret = ath5k_hw_txpower(ah, channel, ah->ah_txpower.txp_requested ?
+ ah->ah_txpower.txp_requested * 2 :
+ AR5K_TUNE_MAX_TXPOWER);
if (ret)
return ret;
Put power_level to ah_txpower struct with the rest tx power infos and also rename it to txp_requested to make more sense. Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> --- drivers/net/wireless/ath/ath5k/ath5k.h | 2 +- drivers/net/wireless/ath/ath5k/base.c | 5 +++-- drivers/net/wireless/ath/ath5k/mac80211-ops.c | 4 ++-- drivers/net/wireless/ath/ath5k/phy.c | 5 +++-- 4 files changed, 9 insertions(+), 7 deletions(-)