[14/14] rt2x00: rt2800 - Make probe_hw function common between PCI and USB.

Message ID	1346360670-6498-10-git-send-email-gwingerde@gmail.com (mailing list archive)
State	Not Applicable, archived
Headers	show Return-Path: <linux-wireless-owner@vger.kernel.org> From: Gertjan van Wingerde <gwingerde@gmail.com> To: <linux-wireless@vger.kernel.org>, "John W. Linville" <linville@tuxdriver.com> Cc: <users@rt2x00.serialmonkey.com>, Ivo van Doorn <IvDoorn@gmail.com>, Helmut Schaa <helmut.schaa@googlemail.com>, Gertjan van Wingerde <gwingerde@gmail.com> Subject: [PATCH 14/14] rt2x00: rt2800 - Make probe_hw function common between PCI and USB. Date: Thu, 30 Aug 2012 23:04:27 +0200 Message-Id: <1346360670-6498-10-git-send-email-gwingerde@gmail.com> In-Reply-To: <1346360670-6498-9-git-send-email-gwingerde@gmail.com> References: <1346355248-5331-10-git-send-email-gwingerde@gmail.com> <1346360670-6498-1-git-send-email-gwingerde@gmail.com> <1346360670-6498-2-git-send-email-gwingerde@gmail.com> <1346360670-6498-3-git-send-email-gwingerde@gmail.com> <1346360670-6498-4-git-send-email-gwingerde@gmail.com> <1346360670-6498-5-git-send-email-gwingerde@gmail.com> <1346360670-6498-6-git-send-email-gwingerde@gmail.com> <1346360670-6498-7-git-send-email-gwingerde@gmail.com> <1346360670-6498-8-git-send-email-gwingerde@gmail.com> <1346360670-6498-9-git-send-email-gwingerde@gmail.com> Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index c3cae1d..2ad3b7a 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -44,6 +44,13 @@ #include "rt2800.h" /* + * Allow hardware encryption to be disabled. + */ +static bool modparam_nohwcrypt = false; +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); + +/* * Register access. * All access to the CSR registers will go through the methods * rt2800_register_read and rt2800_register_write. @@ -4391,7 +4398,7 @@ void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) } EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse); -int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) { struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; u16 word; @@ -4399,6 +4406,11 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) u8 default_lna_gain; /* + * Read the EEPROM. + */ + rt2800_read_eeprom(rt2x00dev); + + /* * Start validation of the data that has been read. */ mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0); @@ -4520,9 +4532,8 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_validate_eeprom); -int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) +static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) { u32 reg; u16 value; @@ -4680,7 +4691,6 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_init_eeprom); /* * RF value list for rt28xx @@ -4823,7 +4833,7 @@ static const struct rf_channel rf_vals_3x[] = { {173, 0x61, 0, 9}, }; -int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) +static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) { struct hw_mode_spec *spec = &rt2x00dev->spec; struct channel_info *info; @@ -4999,7 +5009,72 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) return 0; } -EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode); + +int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev) +{ + int retval; + u32 reg; + + /* + * Allocate eeprom data. + */ + retval = rt2800_validate_eeprom(rt2x00dev); + if (retval) + return retval; + + retval = rt2800_init_eeprom(rt2x00dev); + if (retval) + return retval; + + /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg); + rt2x00_set_field32(&reg, GPIO_CTRL_DIR2, 1); + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + + /* + * Initialize hw specifications. + */ + retval = rt2800_probe_hw_mode(rt2x00dev); + if (retval) + return retval; + + /* + * Set device capabilities. + */ + __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); + __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags); + if (!rt2x00_is_usb(rt2x00dev)) + __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags); + + /* + * Set device requirements. + */ + if (!rt2x00_is_soc(rt2x00dev)) + __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags); + if (!modparam_nohwcrypt) + __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); + __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags); + if (rt2x00_is_usb(rt2x00dev)) + __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags); + else { + __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); + __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags); + } + + /* + * Set the rssi offset. + */ + rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + + return 0; +} +EXPORT_SYMBOL_GPL(rt2800_probe_hw); /* * IEEE80211 stack callback functions. diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h index 18a0b67..303e177 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.h +++ b/drivers/net/wireless/rt2x00/rt2800lib.h @@ -43,6 +43,8 @@ struct rt2800_ops { const unsigned int offset, const struct rt2x00_field32 field, u32 *reg); + void (*read_eeprom)(struct rt2x00_dev *rt2x00dev); + int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len); int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev); @@ -114,6 +116,13 @@ static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev, return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg); } +static inline void rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev) +{ + const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; + + rt2800ops->read_eeprom(rt2x00dev); +} + static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len) { @@ -191,9 +200,8 @@ void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev); int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev); void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev); -int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev); -int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev); -int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev); + +int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev); void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32, u16 *iv16); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 0965540..abfc876 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -47,13 +47,6 @@ #include "rt2800.h" #include "rt2800pci.h" -/* - * Allow hardware encryption to be disabled. - */ -static bool modparam_nohwcrypt = false; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) { unsigned int i; @@ -965,85 +958,14 @@ static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance) /* * Device probe functions. */ -static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) +static void rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) { - /* - * Read EEPROM into buffer - */ if (rt2x00_is_soc(rt2x00dev)) rt2800pci_read_eeprom_soc(rt2x00dev); else if (rt2800pci_efuse_detect(rt2x00dev)) rt2800pci_read_eeprom_efuse(rt2x00dev); else rt2800pci_read_eeprom_pci(rt2x00dev); - - return rt2800_validate_eeprom(rt2x00dev); -} - -static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) -{ - int retval; - u32 reg; - - /* - * Allocate eeprom data. - */ - retval = rt2800pci_validate_eeprom(rt2x00dev); - if (retval) - return retval; - - retval = rt2800_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2x00pci_register_read(rt2x00dev, GPIO_CTRL, &reg); - rt2x00_set_field32(&reg, GPIO_CTRL_DIR2, 1); - rt2x00pci_register_write(rt2x00dev, GPIO_CTRL, reg); - - /* - * Initialize hw specifications. - */ - retval = rt2800_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * This device has multiple filters for control frames - * and has a separate filter for PS Poll frames. - */ - __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags); - - /* - * This device has a pre tbtt interrupt and thus fetches - * a new beacon directly prior to transmission. - */ - __set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags); - - /* - * This device requires firmware. - */ - if (!rt2x00_is_soc(rt2x00dev)) - __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags); - if (!modparam_nohwcrypt) - __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags); - - /* - * Set the rssi offset. - */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; - - return 0; } static const struct ieee80211_ops rt2800pci_mac80211_ops = { @@ -1081,6 +1003,7 @@ static const struct rt2800_ops rt2800pci_rt2800_ops = { .register_multiread = rt2x00pci_register_multiread, .register_multiwrite = rt2x00pci_register_multiwrite, .regbusy_read = rt2x00pci_regbusy_read, + .read_eeprom = rt2800pci_read_eeprom, .drv_write_firmware = rt2800pci_write_firmware, .drv_init_registers = rt2800pci_init_registers, .drv_get_txwi = rt2800pci_get_txwi, @@ -1093,7 +1016,7 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .tbtt_tasklet = rt2800pci_tbtt_tasklet, .rxdone_tasklet = rt2800pci_rxdone_tasklet, .autowake_tasklet = rt2800pci_autowake_tasklet, - .probe_hw = rt2800pci_probe_hw, + .probe_hw = rt2800_probe_hw, .get_firmware_name = rt2800pci_get_firmware_name, .check_firmware = rt2800_check_firmware, .load_firmware = rt2800_load_firmware, diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 5390632..dd0a41c 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -43,13 +43,6 @@ #include "rt2800usb.h" /* - * Allow hardware encryption to be disabled. - */ -static bool modparam_nohwcrypt; -module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); -MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); - -/* * Queue handlers. */ static void rt2800usb_start_queue(struct data_queue *queue) @@ -722,73 +715,27 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, /* * Device probe functions. */ -static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) +static void rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev) { if (rt2800_efuse_detect(rt2x00dev)) rt2800_read_eeprom_efuse(rt2x00dev); else rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE); - - return rt2800_validate_eeprom(rt2x00dev); } static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; - u32 reg; - /* - * Allocate eeprom data. - */ - retval = rt2800usb_validate_eeprom(rt2x00dev); + retval = rt2800_probe_hw(rt2x00dev); if (retval) return retval; - retval = rt2800_init_eeprom(rt2x00dev); - if (retval) - return retval; - - /* - * Enable rfkill polling by setting GPIO direction of the - * rfkill switch GPIO pin correctly. - */ - rt2x00usb_register_read(rt2x00dev, GPIO_CTRL, &reg); - rt2x00_set_field32(&reg, GPIO_CTRL_DIR2, 1); - rt2x00usb_register_write(rt2x00dev, GPIO_CTRL, reg); - - /* - * Initialize hw specifications. - */ - retval = rt2800_probe_hw_mode(rt2x00dev); - if (retval) - return retval; - - /* - * This device has multiple filters for control frames - * and has a separate filter for PS Poll frames. - */ - __set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags); - - /* - * This device requires firmware. - */ - __set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags); - if (!modparam_nohwcrypt) - __set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags); - __set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags); - __set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags); - - rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout, - /* - * Set the rssi offset. + * Set txstatus timer function. */ - rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET; + rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout; /* * Overwrite TX done handler @@ -834,6 +781,7 @@ static const struct rt2800_ops rt2800usb_rt2800_ops = { .register_multiread = rt2x00usb_register_multiread, .register_multiwrite = rt2x00usb_register_multiwrite, .regbusy_read = rt2x00usb_regbusy_read, + .read_eeprom = rt2800usb_read_eeprom, .drv_write_firmware = rt2800usb_write_firmware, .drv_init_registers = rt2800usb_init_registers, .drv_get_txwi = rt2800usb_get_txwi,

[14/14] rt2x00: rt2800 - Make probe_hw function common between PCI and USB.

Commit Message

Patch