@@ -189,7 +189,7 @@ static int rt73usb_rfkill_poll(struct rt2x00_dev *rt2x00dev)
u32 reg;
rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®);
- return rt2x00_get_field32(reg, MAC_CSR13_BIT7);
+ return rt2x00_get_field32(reg, MAC_CSR13_VAL7);
}
#ifdef CONFIG_RT2X00_LIB_LEDS
@@ -267,21 +267,26 @@ struct hw_pairwise_ta_entry {
/*
* MAC_CSR13: GPIO.
+ * MAC_CSR13_VALx: GPIO value
+ * MAC_CSR13_DIRx: GPIO direction: 0 = input; 1 = output
*/
#define MAC_CSR13 0x3034
-#define MAC_CSR13_BIT0 FIELD32(0x00000001)
-#define MAC_CSR13_BIT1 FIELD32(0x00000002)
-#define MAC_CSR13_BIT2 FIELD32(0x00000004)
-#define MAC_CSR13_BIT3 FIELD32(0x00000008)
-#define MAC_CSR13_BIT4 FIELD32(0x00000010)
-#define MAC_CSR13_BIT5 FIELD32(0x00000020)
-#define MAC_CSR13_BIT6 FIELD32(0x00000040)
-#define MAC_CSR13_BIT7 FIELD32(0x00000080)
-#define MAC_CSR13_BIT8 FIELD32(0x00000100)
-#define MAC_CSR13_BIT9 FIELD32(0x00000200)
-#define MAC_CSR13_BIT10 FIELD32(0x00000400)
-#define MAC_CSR13_BIT11 FIELD32(0x00000800)
-#define MAC_CSR13_BIT12 FIELD32(0x00001000)
+#define MAC_CSR13_VAL0 FIELD32(0x00000001)
+#define MAC_CSR13_VAL1 FIELD32(0x00000002)
+#define MAC_CSR13_VAL2 FIELD32(0x00000004)
+#define MAC_CSR13_VAL3 FIELD32(0x00000008)
+#define MAC_CSR13_VAL4 FIELD32(0x00000010)
+#define MAC_CSR13_VAL5 FIELD32(0x00000020)
+#define MAC_CSR13_VAL6 FIELD32(0x00000040)
+#define MAC_CSR13_VAL7 FIELD32(0x00000080)
+#define MAC_CSR13_DIR0 FIELD32(0x00000100)
+#define MAC_CSR13_DIR1 FIELD32(0x00000200)
+#define MAC_CSR13_DIR2 FIELD32(0x00000400)
+#define MAC_CSR13_DIR3 FIELD32(0x00000800)
+#define MAC_CSR13_DIR4 FIELD32(0x00001000)
+#define MAC_CSR13_DIR5 FIELD32(0x00002000)
+#define MAC_CSR13_DIR6 FIELD32(0x00004000)
+#define MAC_CSR13_DIR7 FIELD32(0x00008000)
/*
* MAC_CSR14: LED control register.
Rename MAC_CSR13_BIT<x> to MAC_CSR13_VAL<x> and MAC_CSR13_DIR<x> to represent the actual meaning better. Clean up list to only mention the active GPIO pins, not just all bits. Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com> Cc: <stable@vger.kernel.org>