@@ -614,6 +614,12 @@ static const uint max_roundup = 512;
#define ALIGNMENT 4
+enum brcmf_sdio_frmtype {
+ BRCMF_SDIO_FT_NORMAL,
+ BRCMF_SDIO_FT_SUPER,
+ BRCMF_SDIO_FT_SUB,
+};
+
static void pkt_align(struct sk_buff *p, int len, int align)
{
uint datalign;
@@ -1032,7 +1038,8 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus)
}
static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
- struct brcmf_sdio_read *rd)
+ struct brcmf_sdio_read *rd,
+ enum brcmf_sdio_frmtype type)
{
u16 len, checksum;
u8 rx_seq, fc, tx_seq_max;
@@ -1059,6 +1066,15 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
brcmf_dbg(ERROR, "HW header length error\n");
return false;
}
+ if (type == BRCMF_SDIO_FT_SUPER &&
+ (roundup(len, bus->blocksize) != rd->len)) {
+ brcmf_dbg(ERROR, "HW superframe header length error\n");
+ return false;
+ }
+ if (type == BRCMF_SDIO_FT_SUB && len > rd->len) {
+ brcmf_dbg(ERROR, "HW subframe header length error\n");
+ return false;
+ }
rd->len = len;
/*
@@ -1071,9 +1087,16 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
* Byte 5: Maximum Sequence number allow for Tx
* Byte 6~7: Reserved
*/
+ if (type == BRCMF_SDIO_FT_SUPER &&
+ SDPCM_GLOMDESC(&header[SDPCM_FRAMETAG_LEN])) {
+ brcmf_dbg(ERROR, "Glom descriptor found in superframe head\n");
+ rd->len = 0;
+ return false;
+ }
rx_seq = SDPCM_PACKET_SEQUENCE(&header[SDPCM_FRAMETAG_LEN]);
rd->channel = SDPCM_PACKET_CHANNEL(&header[SDPCM_FRAMETAG_LEN]);
- if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL) {
+ if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL &&
+ type != BRCMF_SDIO_FT_SUPER) {
brcmf_dbg(ERROR, "HW header length too long\n");
bus->sdiodev->bus_if->dstats.rx_errors++;
bus->sdcnt.rx_toolong++;
@@ -1081,6 +1104,17 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
rd->len = 0;
return false;
}
+ if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) {
+ brcmf_dbg(ERROR, "Wrong channel for superframe\n");
+ rd->len = 0;
+ return false;
+ }
+ if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL &&
+ rd->channel != SDPCM_EVENT_CHANNEL) {
+ brcmf_dbg(ERROR, "Wrong channel for subframe\n");
+ rd->len = 0;
+ return false;
+ }
rd->dat_offset = SDPCM_DOFFSET_VALUE(&header[SDPCM_FRAMETAG_LEN]);
if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
brcmf_dbg(ERROR, "seq %d: bad data offset\n", rx_seq);
@@ -1095,6 +1129,9 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
bus->sdcnt.rx_badseq++;
rd->seq_num = rx_seq;
}
+ /* no need to check the reset for subframe */
+ if (type == BRCMF_SDIO_FT_SUB)
+ return true;
rd->len_nxtfrm = header[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
/* only warm for NON glom packet */
@@ -1126,16 +1163,16 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
u16 dlen, totlen;
u8 *dptr, num = 0;
- u16 sublen, check;
+ u16 sublen;
struct sk_buff *pfirst, *pnext;
int errcode;
- u8 chan, seq, doff, sfdoff;
- u8 txmax;
+ u8 doff, sfdoff;
int ifidx = 0;
bool usechain = bus->use_rxchain;
- u16 next_len;
+
+ struct brcmf_sdio_read rd_new;
/* If packets, issue read(s) and send up packet chain */
/* Return sequence numbers consumed? */
@@ -1279,68 +1316,15 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
pfirst->data, min_t(int, pfirst->len, 48),
"SUPERFRAME:\n");
- /* Validate the superframe header */
- dptr = (u8 *) (pfirst->data);
- sublen = get_unaligned_le16(dptr);
- check = get_unaligned_le16(dptr + sizeof(u16));
-
- chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
- seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
- next_len = dptr[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
- if ((next_len << 4) > MAX_RX_DATASZ) {
- brcmf_dbg(INFO, "nextlen too large (%d) seq %d\n",
- next_len, seq);
- next_len = 0;
- }
- bus->cur_read.len = next_len << 4;
- doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
- txmax = SDPCM_WINDOW_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
-
- errcode = 0;
- if ((u16)~(sublen ^ check)) {
- brcmf_dbg(ERROR, "(superframe): HW hdr error: len/check 0x%04x/0x%04x\n",
- sublen, check);
- errcode = -1;
- } else if (roundup(sublen, bus->blocksize) != dlen) {
- brcmf_dbg(ERROR, "(superframe): len 0x%04x, rounded 0x%04x, expect 0x%04x\n",
- sublen, roundup(sublen, bus->blocksize),
- dlen);
- errcode = -1;
- } else if (SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]) !=
- SDPCM_GLOM_CHANNEL) {
- brcmf_dbg(ERROR, "(superframe): bad channel %d\n",
- SDPCM_PACKET_CHANNEL(
- &dptr[SDPCM_FRAMETAG_LEN]));
- errcode = -1;
- } else if (SDPCM_GLOMDESC(&dptr[SDPCM_FRAMETAG_LEN])) {
- brcmf_dbg(ERROR, "(superframe): got 2nd descriptor?\n");
- errcode = -1;
- } else if ((doff < SDPCM_HDRLEN) ||
- (doff > (pfirst->len - SDPCM_HDRLEN))) {
- brcmf_dbg(ERROR, "(superframe): Bad data offset %d: HW %d pkt %d min %d\n",
- doff, sublen, pfirst->len, SDPCM_HDRLEN);
- errcode = -1;
- }
-
- /* Check sequence number of superframe SW header */
- if (rxseq != seq) {
- brcmf_dbg(INFO, "(superframe) rx_seq %d, expected %d\n",
- seq, rxseq);
- bus->sdcnt.rx_badseq++;
- rxseq = seq;
- }
-
- /* Check window for sanity */
- if ((u8) (txmax - bus->tx_seq) > 0x40) {
- brcmf_dbg(ERROR, "unlikely tx max %d with tx_seq %d\n",
- txmax, bus->tx_seq);
- txmax = bus->tx_seq + 2;
- }
- bus->tx_max = txmax;
+ rd_new.seq_num = rxseq;
+ rd_new.len = dlen;
+ errcode = -!brcmf_sdio_hdparser(bus, pfirst->data, &rd_new,
+ BRCMF_SDIO_FT_SUPER);
+ bus->cur_read.len = rd_new.len_nxtfrm << 4;
/* Remove superframe header, remember offset */
- skb_pull(pfirst, doff);
- sfdoff = doff;
+ skb_pull(pfirst, rd_new.dat_offset);
+ sfdoff = rd_new.dat_offset;
num = 0;
/* Validate all the subframe headers */
@@ -1349,34 +1333,14 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
if (errcode)
break;
- dptr = (u8 *) (pnext->data);
- dlen = (u16) (pnext->len);
- sublen = get_unaligned_le16(dptr);
- check = get_unaligned_le16(dptr + sizeof(u16));
- chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
- doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
+ rd_new.len = pnext->len;
+ rd_new.seq_num = rxseq++;
+ errcode = -!brcmf_sdio_hdparser(bus, pnext->data,
+ &rd_new,
+ BRCMF_SDIO_FT_SUB);
brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
- dptr, 32, "subframe:\n");
+ pnext->data, 32, "subframe:\n");
- if ((u16)~(sublen ^ check)) {
- brcmf_dbg(ERROR, "(subframe %d): HW hdr error: len/check 0x%04x/0x%04x\n",
- num, sublen, check);
- errcode = -1;
- } else if ((sublen > dlen) || (sublen < SDPCM_HDRLEN)) {
- brcmf_dbg(ERROR, "(subframe %d): length mismatch: len 0x%04x, expect 0x%04x\n",
- num, sublen, dlen);
- errcode = -1;
- } else if ((chan != SDPCM_DATA_CHANNEL) &&
- (chan != SDPCM_EVENT_CHANNEL)) {
- brcmf_dbg(ERROR, "(subframe %d): bad channel %d\n",
- num, chan);
- errcode = -1;
- } else if ((doff < SDPCM_HDRLEN) || (doff > sublen)) {
- brcmf_dbg(ERROR, "(subframe %d): Bad data offset %d: HW %d min %d\n",
- num, doff, sublen, SDPCM_HDRLEN);
- errcode = -1;
- }
- /* increase the subframe count */
num++;
}
@@ -1402,27 +1366,11 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
skb_queue_walk_safe(&bus->glom, pfirst, pnext) {
dptr = (u8 *) (pfirst->data);
sublen = get_unaligned_le16(dptr);
- chan = SDPCM_PACKET_CHANNEL(&dptr[SDPCM_FRAMETAG_LEN]);
- seq = SDPCM_PACKET_SEQUENCE(&dptr[SDPCM_FRAMETAG_LEN]);
doff = SDPCM_DOFFSET_VALUE(&dptr[SDPCM_FRAMETAG_LEN]);
- brcmf_dbg(GLOM, "Get subframe %d, %p(%p/%d), sublen %d chan %d seq %d\n",
- num, pfirst, pfirst->data,
- pfirst->len, sublen, chan, seq);
-
- /* precondition: chan == SDPCM_DATA_CHANNEL ||
- chan == SDPCM_EVENT_CHANNEL */
-
- if (rxseq != seq) {
- brcmf_dbg(GLOM, "rx_seq %d, expected %d\n",
- seq, rxseq);
- bus->sdcnt.rx_badseq++;
- rxseq = seq;
- }
- rxseq++;
-
brcmf_dbg_hex_dump(BRCMF_BYTES_ON() && BRCMF_DATA_ON(),
- dptr, dlen, "Rx Subframe Data:\n");
+ dptr, pfirst->len,
+ "Rx Subframe Data:\n");
__skb_trim(pfirst, sublen);
skb_pull(pfirst, doff);
@@ -1642,7 +1590,8 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
bus->rxhdr, SDPCM_HDRLEN,
"RxHdr:\n");
- if (!brcmf_sdio_hdparser(bus, bus->rxhdr, rd)) {
+ if (!brcmf_sdio_hdparser(bus, bus->rxhdr, rd,
+ BRCMF_SDIO_FT_NORMAL)) {
if (!bus->rxpending)
break;
else
@@ -1701,7 +1650,8 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
} else {
memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN);
rd_new.seq_num = rd->seq_num;
- if (!brcmf_sdio_hdparser(bus, bus->rxhdr, &rd_new)) {
+ if (!brcmf_sdio_hdparser(bus, bus->rxhdr, &rd_new,
+ BRCMF_SDIO_FT_NORMAL)) {
rd->len = 0;
brcmu_pkt_buf_free_skb(pkt);
}
Use brcmf_sdio_hdparser to handle header of super frame and sub frame in glomming frame read. Signed-off-by: Franky Lin <frankyl@broadcom.com> --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 174 +++++++------------- 1 files changed, 62 insertions(+), 112 deletions(-)