new file mode 100644
@@ -0,0 +1,152 @@
+/*
+ * Copyright (c) 2006 Damien Bergamini <damien.bergamini@free.fr>
+ * Copyright (c) 2006 Sam Leffler, Errno Consulting
+ * Copyright (c) 2007 Christoph Hellwig <hch@lst.de>
+ * Copyright (c) 2008-2009 Weongyo Jeong <weongyo@freebsd.org>
+ * Copyright (c) 2012 Pontus Fuchs <pontus.fuchs@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#define AR5523_FLAG_PRE_FIRMWARE (1 << 0)
+#define AR5523_FLAG_ABG (1 << 1)
+
+#define AR5523_FIRMWARE_FILE "ar5523.bin"
+
+#define AR5523_CMD_TX_PIPE 0x01
+#define AR5523_DATA_TX_PIPE 0x02
+#define AR5523_CMD_RX_PIPE 0x81
+#define AR5523_DATA_RX_PIPE 0x82
+
+#define ar5523_cmd_tx_pipe(dev) \
+ usb_sndbulkpipe((dev), AR5523_CMD_TX_PIPE)
+#define ar5523_data_tx_pipe(dev) \
+ usb_sndbulkpipe((dev), AR5523_DATA_TX_PIPE)
+#define ar5523_cmd_rx_pipe(dev) \
+ usb_rcvbulkpipe((dev), AR5523_CMD_RX_PIPE)
+#define ar5523_data_rx_pipe(dev) \
+ usb_rcvbulkpipe((dev), AR5523_DATA_RX_PIPE)
+
+#define AR5523_DATA_TIMEOUT 10000
+#define AR5523_CMD_TIMEOUT 1000
+
+#define AR5523_TX_DATA_COUNT 8
+#define AR5523_TX_DATA_RESTART_COUNT 2
+#define AR5523_RX_DATA_COUNT 16
+#define AR5523_RX_DATA_REFILL_COUNT 8
+
+#define AR5523_CMD_ID 1
+#define AR5523_DATA_ID 2
+
+#define AR5523_TX_WD_TIMEOUT (HZ * 2)
+#define AR5523_FLUSH_TIMEOUT (HZ * 3)
+
+enum AR5523_flags {
+ AR5523_HW_UP,
+ AR5523_USB_DISCONNECTED,
+ AR5523_CONNECTED
+};
+
+struct ar5523_tx_cmd {
+ struct ar5523 *ar;
+ struct urb *urb_tx;
+ void *buf_tx;
+ void *odata;
+ int olen;
+ int flags;
+ int res;
+ struct completion done;
+};
+
+/* This struct is placed in tx_info->driver_data. It must not be larger
+ * than IEEE80211_TX_INFO_DRIVER_DATA_SIZE.
+ */
+struct ar5523_tx_data {
+ struct list_head list;
+ struct ar5523 *ar;
+ struct sk_buff *skb;
+ struct urb *urb;
+};
+
+struct ar5523_rx_data {
+ struct list_head list;
+ struct ar5523 *ar;
+ struct urb *urb;
+ struct sk_buff *skb;
+};
+
+struct ar5523 {
+ struct usb_device *dev;
+ struct ieee80211_hw *hw;
+
+ unsigned long flags;
+ struct mutex mutex;
+ struct workqueue_struct *wq;
+
+ struct ar5523_tx_cmd tx_cmd;
+
+ struct delayed_work stat_work;
+
+ struct timer_list tx_wd_timer;
+ struct work_struct tx_wd_work;
+ struct work_struct tx_work;
+ struct list_head tx_queue_pending;
+ struct list_head tx_queue_submitted;
+ spinlock_t tx_data_list_lock;
+ wait_queue_head_t tx_flush_waitq;
+
+ /* Queued + Submitted TX frames */
+ atomic_t tx_nr_total;
+
+ /* Submitted TX frames */
+ atomic_t tx_nr_pending;
+
+ void *rx_cmd_buf;
+ struct urb *rx_cmd_urb;
+
+ struct ar5523_rx_data rx_data[AR5523_RX_DATA_COUNT];
+ spinlock_t rx_data_list_lock;
+ struct list_head rx_data_free;
+ struct list_head rx_data_used;
+ atomic_t rx_data_free_cnt;
+
+ struct work_struct rx_refill_work;
+
+ int rxbufsz;
+ u8 serial[16];
+
+ struct ieee80211_channel channels[14];
+ struct ieee80211_rate rates[12];
+ struct ieee80211_supported_band band;
+ struct ieee80211_vif *vif;
+};
+
+/* flags for sending firmware commands */
+#define AR5523_CMD_FLAG_READ (1 << 1)
+#define AR5523_CMD_FLAG_MAGIC (1 << 2)
+
+#define ar5523_dbg(ar, format, arg...) \
+ dev_dbg(&(ar)->dev->dev, format, ## arg)
+
+/* On USB hot-unplug there can be a lot of URBs in flight and they'll all
+ * fail. Instead of dealing with them in every possible place just surpress
+ * any messages on USB disconnect.
+ */
+#define ar5523_err(ar, format, arg...) \
+do { \
+ if (!test_bit(AR5523_USB_DISCONNECTED, &ar->flags)) { \
+ dev_err(&(ar)->dev->dev, format, ## arg); \
+ } \
+} while (0)
+#define ar5523_info(ar, format, arg...) \
+ dev_info(&(ar)->dev->dev, format, ## arg)
Header file containing structures and defines used by the ar5523 driver. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> --- drivers/net/wireless/ath/ar5523/ar5523.h | 152 ++++++++++++++++++++++++++++++ 1 file changed, 152 insertions(+) create mode 100644 drivers/net/wireless/ath/ar5523/ar5523.h