@@ -1037,9 +1037,9 @@ static void brcmf_sdbrcm_free_glom(struct brcmf_sdio *bus)
}
}
-static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
- struct brcmf_sdio_read *rd,
- enum brcmf_sdio_frmtype type)
+static int brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
+ struct brcmf_sdio_read *rd,
+ enum brcmf_sdio_frmtype type)
{
u16 len, checksum;
u8 rx_seq, fc, tx_seq_max;
@@ -1054,26 +1054,26 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
/* All zero means no more to read */
if (!(len | checksum)) {
bus->rxpending = false;
- return false;
+ return -ENODATA;
}
if ((u16)(~(len ^ checksum))) {
brcmf_dbg(ERROR, "HW header checksum error\n");
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
- return false;
+ return -EIO;
}
if (len < SDPCM_HDRLEN) {
brcmf_dbg(ERROR, "HW header length error\n");
- return false;
+ return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUPER &&
(roundup(len, bus->blocksize) != rd->len)) {
brcmf_dbg(ERROR, "HW superframe header length error\n");
- return false;
+ return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUB && len > rd->len) {
brcmf_dbg(ERROR, "HW subframe header length error\n");
- return false;
+ return -EPROTO;
}
rd->len = len;
@@ -1091,7 +1091,7 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
SDPCM_GLOMDESC(&header[SDPCM_FRAMETAG_LEN])) {
brcmf_dbg(ERROR, "Glom descriptor found in superframe head\n");
rd->len = 0;
- return false;
+ return -EINVAL;
}
rx_seq = SDPCM_PACKET_SEQUENCE(&header[SDPCM_FRAMETAG_LEN]);
rd->channel = SDPCM_PACKET_CHANNEL(&header[SDPCM_FRAMETAG_LEN]);
@@ -1102,18 +1102,18 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
bus->sdcnt.rx_toolong++;
brcmf_sdbrcm_rxfail(bus, false, false);
rd->len = 0;
- return false;
+ return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) {
brcmf_dbg(ERROR, "Wrong channel for superframe\n");
rd->len = 0;
- return false;
+ return -EINVAL;
}
if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL &&
rd->channel != SDPCM_EVENT_CHANNEL) {
brcmf_dbg(ERROR, "Wrong channel for subframe\n");
rd->len = 0;
- return false;
+ return -EINVAL;
}
rd->dat_offset = SDPCM_DOFFSET_VALUE(&header[SDPCM_FRAMETAG_LEN]);
if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
@@ -1121,7 +1121,7 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
rd->len = 0;
- return false;
+ return -ENXIO;
}
if (rd->seq_num != rx_seq) {
brcmf_dbg(ERROR, "seq %d: sequence number error, expect %d\n",
@@ -1131,7 +1131,7 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
}
/* no need to check the reset for subframe */
if (type == BRCMF_SDIO_FT_SUB)
- return true;
+ return 0;
rd->len_nxtfrm = header[SDPCM_FRAMETAG_LEN + SDPCM_NEXTLEN_OFFSET];
if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
/* only warm for NON glom packet */
@@ -1155,7 +1155,7 @@ static bool brcmf_sdio_hdparser(struct brcmf_sdio *bus, u8 *header,
}
bus->tx_max = tx_seq_max;
- return true;
+ return 0;
}
static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
@@ -1323,8 +1323,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
rd_new.seq_num = rxseq;
rd_new.len = dlen;
sdio_claim_host(bus->sdiodev->func[1]);
- errcode = -!brcmf_sdio_hdparser(bus, pfirst->data, &rd_new,
- BRCMF_SDIO_FT_SUPER);
+ errcode = brcmf_sdio_hdparser(bus, pfirst->data, &rd_new,
+ BRCMF_SDIO_FT_SUPER);
sdio_release_host(bus->sdiodev->func[1]);
bus->cur_read.len = rd_new.len_nxtfrm << 4;
@@ -1342,9 +1342,8 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq)
rd_new.len = pnext->len;
rd_new.seq_num = rxseq++;
sdio_claim_host(bus->sdiodev->func[1]);
- errcode = -!brcmf_sdio_hdparser(bus, pnext->data,
- &rd_new,
- BRCMF_SDIO_FT_SUB);
+ errcode = brcmf_sdio_hdparser(bus, pnext->data, &rd_new,
+ BRCMF_SDIO_FT_SUB);
sdio_release_host(bus->sdiodev->func[1]);
brcmf_dbg_hex_dump(BRCMF_GLOM_ON(),
pnext->data, 32, "subframe:\n");
@@ -1612,8 +1611,8 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
bus->rxhdr, SDPCM_HDRLEN,
"RxHdr:\n");
- if (!brcmf_sdio_hdparser(bus, bus->rxhdr, rd,
- BRCMF_SDIO_FT_NORMAL)) {
+ if (brcmf_sdio_hdparser(bus, bus->rxhdr, rd,
+ BRCMF_SDIO_FT_NORMAL)) {
sdio_release_host(bus->sdiodev->func[1]);
if (!bus->rxpending)
break;
@@ -1679,8 +1678,8 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes)
memcpy(bus->rxhdr, pkt->data, SDPCM_HDRLEN);
rd_new.seq_num = rd->seq_num;
sdio_claim_host(bus->sdiodev->func[1]);
- if (!brcmf_sdio_hdparser(bus, bus->rxhdr, &rd_new,
- BRCMF_SDIO_FT_NORMAL)) {
+ if (brcmf_sdio_hdparser(bus, bus->rxhdr, &rd_new,
+ BRCMF_SDIO_FT_NORMAL)) {
rd->len = 0;
brcmu_pkt_buf_free_skb(pkt);
}
Use int instead of bool as the return type of function brcmf_sdio_hdparser to explicitly describe error returns. Signed-off-by: Franky Lin <frankyl@broadcom.com> --- drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c | 47 ++++++++++---------- 1 file changed, 23 insertions(+), 24 deletions(-)