@@ -491,7 +491,6 @@ static int brcmf_ops_sdio_probe(struct sdio_func *func,
sdiodev->bus_if = bus_if;
bus_if->bus_priv.sdio = sdiodev;
- bus_if->type = SDIO_BUS;
bus_if->align = BRCMF_SDALIGN;
dev_set_drvdata(&func->dev, bus_if);
dev_set_drvdata(&sdiodev->func[1]->dev, bus_if);
@@ -40,8 +40,11 @@
#define BRCMF_C_GET_SSID 25
#define BRCMF_C_SET_SSID 26
#define BRCMF_C_GET_CHANNEL 29
+#define BRCMF_C_SET_CHANNEL 30
#define BRCMF_C_GET_SRL 31
+#define BRCMF_C_SET_SRL 32
#define BRCMF_C_GET_LRL 33
+#define BRCMF_C_SET_LRL 34
#define BRCMF_C_GET_RADIO 37
#define BRCMF_C_SET_RADIO 38
#define BRCMF_C_GET_PHYTYPE 39
@@ -60,6 +63,7 @@
#define BRCMF_C_SET_COUNTRY 84
#define BRCMF_C_GET_PM 85
#define BRCMF_C_SET_PM 86
+#define BRCMF_C_GET_CURR_RATESET 114
#define BRCMF_C_GET_AP 117
#define BRCMF_C_SET_AP 118
#define BRCMF_C_GET_RSSI 127
@@ -67,6 +71,7 @@
#define BRCMF_C_SET_WSEC 134
#define BRCMF_C_GET_PHY_NOISE 135
#define BRCMF_C_GET_BSS_INFO 136
+#define BRCMF_C_GET_PHYLIST 180
#define BRCMF_C_SET_SCAN_CHANNEL_TIME 185
#define BRCMF_C_SET_SCAN_UNASSOC_TIME 187
#define BRCMF_C_SCB_DEAUTHENTICATE_FOR_REASON 201
@@ -102,16 +107,8 @@
#define BRCMF_SCAN_PARAMS_COUNT_MASK 0x0000ffff
#define BRCMF_SCAN_PARAMS_NSSID_SHIFT 16
-/* Indicates this key is using soft encrypt */
-#define WL_SOFT_KEY (1 << 0)
/* primary (ie tx) key */
#define BRCMF_PRIMARY_KEY (1 << 1)
-/* Reserved for backward compat */
-#define WL_KF_RES_4 (1 << 4)
-/* Reserved for backward compat */
-#define WL_KF_RES_5 (1 << 5)
-/* Indicates a group key for a IBSS PEER */
-#define WL_IBSS_PEER_GROUP_KEY (1 << 6)
/* For supporting multiple interfaces */
#define BRCMF_MAX_IFS 16
@@ -286,7 +283,7 @@ struct brcm_rateset_le {
/* # rates in this set */
__le32 count;
/* rates in 500kbps units w/hi bit set if basic */
- u8 rates[WL_NUMRATES];
+ u8 rates[BRCMF_MAXRATES_IN_SET];
};
struct brcmf_ssid {
@@ -580,11 +577,6 @@ extern int brcmf_proto_cdc_query_dcmd(struct brcmf_pub *drvr, int ifidx,
extern int brcmf_proto_cdc_set_dcmd(struct brcmf_pub *drvr, int ifidx, uint cmd,
void *buf, uint len);
-extern int brcmf_ifname2idx(struct brcmf_pub *drvr, char *name);
-extern int brcmf_c_host_event(struct brcmf_pub *drvr, int *idx,
- void *pktdata, struct brcmf_event_msg *,
- void **data_ptr);
-
extern int brcmf_net_attach(struct brcmf_if *ifp);
extern struct brcmf_if *brcmf_add_if(struct brcmf_pub *drvr, int ifidx,
s32 bssidx, char *name, u8 *mac_addr);
@@ -45,7 +45,6 @@ struct brcmf_bus_dcmd {
/* interface structure between common and bus layer */
struct brcmf_bus {
- u8 type; /* bus type */
union {
struct brcmf_sdio_dev *sdio;
struct brcmf_usbdev *usb;
@@ -23,8 +23,6 @@
#include <linux/types.h>
#include <linux/netdevice.h>
-#include <linux/sched.h>
-#include <defs.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
@@ -18,10 +18,7 @@
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/sched.h>
#include <linux/netdevice.h>
-#include <asm/unaligned.h>
-#include <defs.h>
#include <brcmu_wifi.h>
#include <brcmu_utils.h>
#include "dhd.h"
@@ -30,9 +27,6 @@
#include "dhd_dbg.h"
#include "fwil.h"
-#define BRCM_OUI "\x00\x10\x18"
-#define DOT11_OUI_LEN 3
-#define BCMILCP_BCM_SUBTYPE_EVENT 1
#define PKTFILTER_BUF_SIZE 128
#define BRCMF_ARPOL_MODE 0xb /* agent|snoop|peer_autoreply */
#define BRCMF_DEFAULT_BCN_TIMEOUT 3
@@ -40,8 +34,6 @@
#define BRCMF_DEFAULT_SCAN_UNASSOC_TIME 40
#define BRCMF_DEFAULT_PACKET_FILTER "100 0 0 0 0x01 0x00"
-#define MSGTRACE_VERSION 1
-
#ifdef DEBUG
static const char brcmf_version[] =
"Dongle Host Driver, version " BRCMF_VERSION_STR "\nCompiled on "
@@ -51,22 +43,6 @@ static const char brcmf_version[] =
"Dongle Host Driver, version " BRCMF_VERSION_STR;
#endif
-/* Message trace header */
-struct msgtrace_hdr {
- u8 version;
- u8 spare;
- __be16 len; /* Len of the trace */
- __be32 seqnum; /* Sequence number of message. Useful
- * if the messsage has been lost
- * because of DMA error or a bus reset
- * (ex: SDIO Func2)
- */
- __be32 discarded_bytes; /* Number of discarded bytes because of
- trace overflow */
- __be32 discarded_printf; /* Number of discarded printf
- because of trace overflow */
-} __packed;
-
bool brcmf_c_prec_enq(struct device *dev, struct pktq *q,
struct sk_buff *pkt, int prec)
@@ -14,17 +14,12 @@
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/debugfs.h>
-#include <linux/if_ether.h>
-#include <linux/if.h>
#include <linux/netdevice.h>
-#include <linux/ieee80211.h>
#include <linux/module.h>
-#include <defs.h>
#include <brcmu_wifi.h>
#include <brcmu_utils.h>
#include "dhd.h"
-#include "dhd_bus.h"
#include "dhd_dbg.h"
static struct dentry *root_folder;
@@ -16,27 +16,11 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/kthread.h>
-#include <linux/slab.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
#include <linux/etherdevice.h>
-#include <linux/mmc/sdio_func.h>
-#include <linux/random.h>
-#include <linux/spinlock.h>
-#include <linux/ethtool.h>
-#include <linux/fcntl.h>
-#include <linux/fs.h>
-#include <linux/uaccess.h>
-#include <linux/hardirq.h>
-#include <linux/mutex.h>
-#include <linux/wait.h>
#include <linux/module.h>
#include <net/cfg80211.h>
#include <net/rtnetlink.h>
-#include <defs.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
@@ -48,8 +32,8 @@
#include "fwil.h"
MODULE_AUTHOR("Broadcom Corporation");
-MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN fullmac driver.");
-MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN fullmac cards");
+MODULE_DESCRIPTION("Broadcom 802.11 wireless LAN fullmac driver.");
+MODULE_SUPPORTED_DEVICE("Broadcom 802.11 WLAN fullmac cards");
MODULE_LICENSE("Dual BSD/GPL");
#define MAX_WAIT_FOR_8021X_TX 50 /* msecs */
@@ -58,24 +42,6 @@ MODULE_LICENSE("Dual BSD/GPL");
int brcmf_msg_level = BRCMF_ERROR_VAL;
module_param(brcmf_msg_level, int, 0);
-int brcmf_ifname2idx(struct brcmf_pub *drvr, char *name)
-{
- int i = BRCMF_MAX_IFS;
- struct brcmf_if *ifp;
-
- if (name == NULL || *name == '\0')
- return 0;
-
- while (--i > 0) {
- ifp = drvr->iflist[i];
- if (ifp && !strncmp(ifp->ndev->name, name, IFNAMSIZ))
- break;
- }
-
- brcmf_dbg(TRACE, "return idx %d for \"%s\"\n", i, name);
-
- return i; /* default - the primary interface */
-}
char *brcmf_ifname(struct brcmf_pub *drvr, int ifidx)
{
@@ -36,10 +36,6 @@ extern void brcmf_proto_stop(struct brcmf_pub *drvr);
extern void brcmf_proto_hdrpush(struct brcmf_pub *, int ifidx,
struct sk_buff *txp);
-/* Use protocol to issue command to dongle */
-extern int brcmf_proto_dcmd(struct brcmf_pub *drvr, int ifidx,
- struct brcmf_dcmd *dcmd, int len);
-
/* Sets dongle media info (drv_version, mac address). */
extern int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
@@ -15,7 +15,6 @@
*/
#include <linux/netdevice.h>
-#include "defs.h"
#include "brcmu_wifi.h"
#include "brcmu_utils.h"
@@ -20,7 +20,6 @@
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <defs.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
#include "dhd.h"
@@ -14,24 +14,11 @@
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/kthread.h>
-#include <linux/slab.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/spinlock.h>
-#include <linux/ethtool.h>
-#include <linux/fcntl.h>
-#include <linux/fs.h>
-#include <linux/uaccess.h>
#include <linux/firmware.h>
#include <linux/usb.h>
-#include <linux/vmalloc.h>
-#include <net/cfg80211.h>
-#include <defs.h>
#include <brcmu_utils.h>
#include <brcmu_wifi.h>
#include <dhd_bus.h>
@@ -1240,8 +1227,7 @@ error:
return NULL;
}
-static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo,
- const char *desc, u32 bustype, u32 hdrlen)
+static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo)
{
struct brcmf_bus *bus = NULL;
struct brcmf_usbdev *bus_pub = NULL;
@@ -1265,12 +1251,11 @@ static int brcmf_usb_probe_cb(struct brcmf_usbdev_info *devinfo,
bus->brcmf_bus_stop = brcmf_usb_down;
bus->brcmf_bus_txctl = brcmf_usb_tx_ctlpkt;
bus->brcmf_bus_rxctl = brcmf_usb_rx_ctlpkt;
- bus->type = bustype;
bus->bus_priv.usb = bus_pub;
dev_set_drvdata(dev, bus);
/* Attach to the common driver interface */
- ret = brcmf_attach(hdrlen, dev);
+ ret = brcmf_attach(0, dev);
if (ret) {
brcmf_dbg(ERROR, "brcmf_attach failed\n");
goto fail;
@@ -1419,7 +1404,7 @@ brcmf_usb_probe(struct usb_interface *intf, const struct usb_device_id *id)
else
brcmf_dbg(USB, "Broadcom full speed USB wireless device detected\n");
- ret = brcmf_usb_probe_cb(devinfo, "", USB_BUS, 0);
+ ret = brcmf_usb_probe_cb(devinfo);
if (ret)
goto fail;
@@ -19,14 +19,7 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
-#include <linux/if_arp.h>
-#include <linux/sched.h>
-#include <linux/kthread.h>
-#include <linux/netdevice.h>
-#include <linux/bitops.h>
#include <linux/etherdevice.h>
-#include <linux/ieee80211.h>
-#include <linux/uaccess.h>
#include <net/cfg80211.h>
#include <net/netlink.h>
@@ -883,7 +876,7 @@ static s32 brcmf_set_frag(struct net_device *ndev, u32 frag_threshold)
static s32 brcmf_set_retry(struct net_device *ndev, u32 retry, bool l)
{
s32 err = 0;
- u32 cmd = (l ? BRCM_SET_LRL : BRCM_SET_SRL);
+ u32 cmd = (l ? BRCMF_C_SET_LRL : BRCMF_C_SET_SRL);
err = brcmf_fil_cmd_int_set(netdev_priv(ndev), cmd, retry);
if (err) {
@@ -1066,7 +1059,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev,
else
bcnprd = 100;
- err = brcmf_fil_cmd_int_set(ifp, BRCM_SET_BCNPRD, bcnprd);
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_BCNPRD, bcnprd);
if (err) {
WL_ERR("WLC_SET_BCNPRD failed (%d)\n", err);
goto done;
@@ -1108,7 +1101,7 @@ brcmf_cfg80211_join_ibss(struct wiphy *wiphy, struct net_device *ndev,
/* set channel for starter */
target_channel = cfg->channel;
- err = brcmf_fil_cmd_int_set(ifp, BRCM_SET_CHANNEL,
+ err = brcmf_fil_cmd_int_set(ifp, BRCMF_C_SET_CHANNEL,
target_channel);
if (err) {
WL_ERR("WLC_SET_CHANNEL failed (%d)\n", err);
@@ -2044,7 +2037,7 @@ brcmf_cfg80211_set_bitrate_mask(struct wiphy *wiphy, struct net_device *ndev,
/* addr param is always NULL. ignore it */
/* Get current rateset */
- err = brcmf_fil_cmd_data_get(ifp, BRCM_GET_CURR_RATESET,
+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_CURR_RATESET,
&rateset_le, sizeof(rateset_le));
if (err) {
WL_ERR("could not get current rateset (%d)\n", err);
@@ -4456,7 +4449,7 @@ static s32 wl_update_wiphybands(struct brcmf_cfg80211_info *cfg)
s8 phy;
s32 err = 0;
- err = brcmf_fil_cmd_data_get(ifp, BRCM_GET_PHYLIST,
+ err = brcmf_fil_cmd_data_get(ifp, BRCMF_C_GET_PHYLIST,
&phy_list, sizeof(phy_list));
if (err) {
WL_ERR("error (%d)\n", err);