@@ -67,16 +67,6 @@
#define BRCMF_USB_43236_FW_NAME "brcm/brcmfmac43236b.bin"
#define BRCMF_USB_43242_FW_NAME "brcm/brcmfmac43242a.bin"
-enum usbdev_suspend_state {
- USBOS_SUSPEND_STATE_DEVICE_ACTIVE = 0, /* Device is busy, won't allow
- suspend */
- USBOS_SUSPEND_STATE_SUSPEND_PENDING, /* Device is idle, can be
- * suspended. Wating PM to
- * suspend the device
- */
- USBOS_SUSPEND_STATE_SUSPENDED /* Device suspended */
-};
-
struct brcmf_usb_image {
struct list_head list;
s8 *fwname;
@@ -97,10 +87,8 @@ struct brcmf_usbdev_info {
struct list_head rx_postq;
struct list_head tx_freeq;
struct list_head tx_postq;
- enum usbdev_suspend_state suspend_state;
uint rx_pipe, tx_pipe, intr_pipe, rx_pipe2;
- bool activity;
int rx_low_watermark;
int tx_low_watermark;
int tx_high_watermark;
@@ -213,11 +201,6 @@ brcmf_usb_ctlwrite_complete(struct urb *urb)
urb->status);
}
-static int brcmf_usb_pnp(struct brcmf_usbdev_info *devinfo, uint state)
-{
- return 0;
-}
-
static int
brcmf_usb_send_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len)
{
@@ -229,14 +212,6 @@ brcmf_usb_send_ctl(struct brcmf_usbdev_info *devinfo, u8 *buf, int len)
len == 0 || devinfo->ctl_urb == NULL)
return -EINVAL;
- /* If the USB/HSIC bus in sleep state, wake it up */
- if (devinfo->suspend_state == USBOS_SUSPEND_STATE_SUSPENDED)
- if (brcmf_usb_pnp(devinfo, BCMFMAC_USB_PNP_RESUME) != 0) {
- brcmf_dbg(ERROR, "Could not Resume the bus!\n");
- return -EIO;
- }
-
- devinfo->activity = true;
size = len;
devinfo->ctl_write.wLength = cpu_to_le16p(&size);
devinfo->ctl_urb->transfer_buffer_length = size;
@@ -299,10 +274,8 @@ static int brcmf_usb_tx_ctlpkt(struct device *dev, u8 *buf, u32 len)
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
brcmf_dbg(USB, "Enter\n");
- if (devinfo->bus_pub.state != BCMFMAC_USB_STATE_UP) {
- /* TODO: handle suspend/resume */
+ if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
return -EIO;
- }
if (test_and_set_bit(0, &devinfo->ctl_op))
return -EIO;
@@ -330,10 +303,9 @@ static int brcmf_usb_rx_ctlpkt(struct device *dev, u8 *buf, u32 len)
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
brcmf_dbg(USB, "Enter\n");
- if (devinfo->bus_pub.state != BCMFMAC_USB_STATE_UP) {
- /* TODO: handle suspend/resume */
+ if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
return -EIO;
- }
+
if (test_and_set_bit(0, &devinfo->ctl_op))
return -EIO;
@@ -499,7 +471,7 @@ static void brcmf_usb_rx_complete(struct urb *urb)
return;
}
- if (devinfo->bus_pub.state == BCMFMAC_USB_STATE_UP) {
+ if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
skb_put(skb, urb->actual_length);
if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) {
brcmf_dbg(ERROR, "rx protocol error\n");
@@ -552,8 +524,8 @@ static void brcmf_usb_rx_fill_all(struct brcmf_usbdev_info *devinfo)
{
struct brcmf_usbreq *req;
- if (devinfo->bus_pub.state != BCMFMAC_USB_STATE_UP) {
- brcmf_dbg(ERROR, "bus is not up\n");
+ if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP) {
+ brcmf_dbg(ERROR, "bus is not up=%d\n", devinfo->bus_pub.state);
return;
}
while ((req = brcmf_usb_deq(devinfo, &devinfo->rx_freeq, NULL)) != NULL)
@@ -573,20 +545,15 @@ brcmf_usb_state_change(struct brcmf_usbdev_info *devinfo, int state)
return;
old_state = devinfo->bus_pub.state;
-
- /* Don't update state if it's PnP firmware re-download */
- if (state != BCMFMAC_USB_STATE_PNP_FWDL) /* TODO */
- devinfo->bus_pub.state = state;
-
- if ((old_state == BCMFMAC_USB_STATE_SLEEP)
- && (state == BCMFMAC_USB_STATE_UP)) {
- brcmf_usb_rx_fill_all(devinfo);
- }
+ devinfo->bus_pub.state = state;
/* update state of upper layer */
- if (state == BCMFMAC_USB_STATE_DOWN) {
+ if (state == BRCMFMAC_USB_STATE_DOWN) {
brcmf_dbg(USB, "DBUS is down\n");
bcmf_bus->state = BRCMF_BUS_DOWN;
+ } else if (state == BRCMFMAC_USB_STATE_UP) {
+ brcmf_dbg(USB, "DBUS is up\n");
+ bcmf_bus->state = BRCMF_BUS_DATA;
} else {
brcmf_dbg(USB, "DBUS current state=%d\n", state);
}
@@ -597,7 +564,7 @@ brcmf_usb_intr_complete(struct urb *urb)
{
struct brcmf_usbdev_info *devinfo =
(struct brcmf_usbdev_info *)urb->context;
- bool killed;
+ int err;
brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status);
@@ -605,24 +572,24 @@ brcmf_usb_intr_complete(struct urb *urb)
return;
if (unlikely(urb->status)) {
- if (devinfo->suspend_state ==
- USBOS_SUSPEND_STATE_SUSPEND_PENDING)
- killed = true;
-
- if ((urb->status == -ENOENT && (!killed))
- || urb->status == -ESHUTDOWN ||
- urb->status == -ENODEV) {
- brcmf_usb_state_change(devinfo, BCMFMAC_USB_STATE_DOWN);
+ if (urb->status == -ENOENT ||
+ urb->status == -ESHUTDOWN ||
+ urb->status == -ENODEV) {
+ brcmf_usb_state_change(devinfo,
+ BRCMFMAC_USB_STATE_DOWN);
}
}
- if (devinfo->bus_pub.state == BCMFMAC_USB_STATE_DOWN) {
+ if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN) {
brcmf_dbg(ERROR, "intr cb when DBUS down, ignoring\n");
return;
}
- if (devinfo->bus_pub.state == BCMFMAC_USB_STATE_UP)
- usb_submit_urb(devinfo->intr_urb, GFP_ATOMIC);
+ if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) {
+ err = usb_submit_urb(devinfo->intr_urb, GFP_ATOMIC);
+ if (err)
+ brcmf_dbg(ERROR, "usb_submit_urb, err=%d\n", err);
+ }
}
static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
@@ -632,10 +599,8 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb)
int ret;
brcmf_dbg(USB, "Enter, skb=%p\n", skb);
- if (devinfo->bus_pub.state != BCMFMAC_USB_STATE_UP) {
- /* TODO: handle suspend/resume */
+ if (devinfo->bus_pub.state != BRCMFMAC_USB_STATE_UP)
return -EIO;
- }
req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq,
&devinfo->tx_freecount);
@@ -675,26 +640,16 @@ static int brcmf_usb_up(struct device *dev)
{
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(dev);
u16 ifnum;
+ int ret;
brcmf_dbg(USB, "Enter\n");
- if (devinfo->bus_pub.state == BCMFMAC_USB_STATE_UP)
+ if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP)
return 0;
- /* If the USB/HSIC bus in sleep state, wake it up */
- if (devinfo->suspend_state == USBOS_SUSPEND_STATE_SUSPENDED) {
- if (brcmf_usb_pnp(devinfo, BCMFMAC_USB_PNP_RESUME) != 0) {
- brcmf_dbg(ERROR, "Could not Resume the bus!\n");
- return -EIO;
- }
- }
- devinfo->activity = true;
-
/* Success, indicate devinfo is fully up */
- brcmf_usb_state_change(devinfo, BCMFMAC_USB_STATE_UP);
+ brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_UP);
if (devinfo->intr_urb) {
- int ret;
-
usb_fill_int_urb(devinfo->intr_urb, devinfo->usbdev,
devinfo->intr_pipe,
&devinfo->intr,
@@ -743,10 +698,10 @@ static void brcmf_usb_down(struct device *dev)
if (devinfo == NULL)
return;
- if (devinfo->bus_pub.state == BCMFMAC_USB_STATE_DOWN)
+ if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_DOWN)
return;
- brcmf_usb_state_change(devinfo, BCMFMAC_USB_STATE_DOWN);
+ brcmf_usb_state_change(devinfo, BRCMFMAC_USB_STATE_DOWN);
if (devinfo->intr_urb)
usb_kill_urb(devinfo->intr_urb);
@@ -1006,9 +961,9 @@ static int brcmf_usb_dlstart(struct brcmf_usbdev_info *devinfo, u8 *fw, int len)
err = brcmf_usb_dl_writeimage(devinfo, fw, len);
if (err == 0)
- devinfo->bus_pub.state = BCMFMAC_USB_STATE_DL_DONE;
+ devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_DONE;
else
- devinfo->bus_pub.state = BCMFMAC_USB_STATE_DL_PENDING;
+ devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DL_FAIL;
brcmf_dbg(USB, "Exit, err=%d\n", err);
return err;
@@ -1221,6 +1176,7 @@ struct brcmf_usbdev *brcmf_usb_attach(struct brcmf_usbdev_info *devinfo,
devinfo->rx_low_watermark = nrxq / 2;
devinfo->bus_pub.devinfo = devinfo;
devinfo->bus_pub.ntxq = ntxq;
+ devinfo->bus_pub.state = BRCMFMAC_USB_STATE_DOWN;
/* flow control when too many tx urbs posted */
devinfo->tx_low_watermark = ntxq / 4;
@@ -1491,7 +1447,7 @@ brcmf_usb_disconnect(struct usb_interface *intf)
}
/*
- * only need to signal the bus being down and update the suspend state.
+ * only need to signal the bus being down and update the state.
*/
static int brcmf_usb_suspend(struct usb_interface *intf, pm_message_t state)
{
@@ -1499,13 +1455,13 @@ static int brcmf_usb_suspend(struct usb_interface *intf, pm_message_t state)
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
brcmf_dbg(USB, "Enter\n");
- devinfo->bus_pub.state = BCMFMAC_USB_STATE_DOWN;
- devinfo->suspend_state = USBOS_SUSPEND_STATE_SUSPENDED;
+ devinfo->bus_pub.state = BRCMFMAC_USB_STATE_SLEEP;
+ brcmf_detach(&usb->dev);
return 0;
}
/*
- * mark suspend state active and crank up the bus.
+ * (re-) start the bus.
*/
static int brcmf_usb_resume(struct usb_interface *intf)
{
@@ -1513,11 +1469,25 @@ static int brcmf_usb_resume(struct usb_interface *intf)
struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
brcmf_dbg(USB, "Enter\n");
- devinfo->suspend_state = USBOS_SUSPEND_STATE_DEVICE_ACTIVE;
- brcmf_bus_start(&usb->dev);
+ if (!brcmf_attach(0, devinfo->dev))
+ return brcmf_bus_start(&usb->dev);
+
return 0;
}
+static int brcmf_usb_reset_resume(struct usb_interface *intf)
+{
+ struct usb_device *usb = interface_to_usbdev(intf);
+ struct brcmf_usbdev_info *devinfo = brcmf_usb_get_businfo(&usb->dev);
+
+ brcmf_dbg(USB, "Enter\n");
+
+ if (!brcmf_usb_fw_download(devinfo))
+ return brcmf_usb_resume(intf);
+
+ return -EIO;
+}
+
#define BRCMF_USB_VENDOR_ID_BROADCOM 0x0a5c
#define BRCMF_USB_DEVICE_ID_43143 0xbd1e
#define BRCMF_USB_DEVICE_ID_43236 0xbd17
@@ -1537,7 +1507,6 @@ MODULE_FIRMWARE(BRCMF_USB_43143_FW_NAME);
MODULE_FIRMWARE(BRCMF_USB_43236_FW_NAME);
MODULE_FIRMWARE(BRCMF_USB_43242_FW_NAME);
-/* TODO: suspend and resume entries */
static struct usb_driver brcmf_usbdrvr = {
.name = KBUILD_MODNAME,
.probe = brcmf_usb_probe,
@@ -1545,6 +1514,7 @@ static struct usb_driver brcmf_usbdrvr = {
.id_table = brcmf_usb_devid_table,
.suspend = brcmf_usb_suspend,
.resume = brcmf_usb_resume,
+ .reset_resume = brcmf_usb_reset_resume,
.supports_autosuspend = 1,
.disable_hub_initiated_lpm = 1,
};
@@ -17,19 +17,11 @@
#define BRCMFMAC_USB_H
enum brcmf_usb_state {
- BCMFMAC_USB_STATE_DL_PENDING,
- BCMFMAC_USB_STATE_DL_DONE,
- BCMFMAC_USB_STATE_UP,
- BCMFMAC_USB_STATE_DOWN,
- BCMFMAC_USB_STATE_PNP_FWDL,
- BCMFMAC_USB_STATE_DISCONNECT,
- BCMFMAC_USB_STATE_SLEEP
-};
-
-enum brcmf_usb_pnp_state {
- BCMFMAC_USB_PNP_DISCONNECT,
- BCMFMAC_USB_PNP_SLEEP,
- BCMFMAC_USB_PNP_RESUME,
+ BRCMFMAC_USB_STATE_DOWN,
+ BRCMFMAC_USB_STATE_DL_FAIL,
+ BRCMFMAC_USB_STATE_DL_DONE,
+ BRCMFMAC_USB_STATE_UP,
+ BRCMFMAC_USB_STATE_SLEEP
};
struct brcmf_stats {