@@ -560,11 +560,11 @@ struct ieee80211_if_ibss {
*/
struct ieee802_11_elems;
struct ieee80211_mesh_sync_ops {
- void (*rx_bcn_presp)(struct ieee80211_sub_if_data *sdata,
- u16 stype,
- struct ieee80211_mgmt *mgmt,
- struct ieee802_11_elems *elems,
- struct ieee80211_rx_status *rx_status);
+ void (*rx_bcn)(struct sta_info *sta,
+ struct ieee80211_mgmt *mgmt,
+ struct ieee802_11_elems *elems,
+ struct ieee80211_rx_status *rx_status,
+ u64 tsf);
void (*adjust_tbtt)(struct ieee80211_sub_if_data *sdata);
/* add other framework functions here */
};
@@ -714,7 +714,6 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
struct ieee80211_rx_status *rx_status)
{
struct ieee80211_local *local = sdata->local;
- struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct ieee802_11_elems elems;
struct ieee80211_channel *channel;
size_t baselen;
@@ -750,13 +749,10 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
return;
if (mesh_matches_local(sdata, &elems))
- mesh_neighbour_update(sdata, mgmt->sa, &elems);
-
- if (ifmsh->sync_ops)
- ifmsh->sync_ops->rx_bcn_presp(sdata,
- stype, mgmt, &elems, rx_status);
+ mesh_neighbour_update(sdata, mgmt, &elems, rx_status);
}
+
static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len,
@@ -283,8 +283,9 @@ int mesh_path_send_to_gates(struct mesh_path *mpath);
int mesh_gate_num(struct ieee80211_sub_if_data *sdata);
/* Mesh plinks */
void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
- u8 *hw_addr,
- struct ieee802_11_elems *ie);
+ struct ieee80211_mgmt *mgmt,
+ struct ieee802_11_elems *ie,
+ struct ieee80211_rx_status *rx_status);
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie);
u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata);
void mesh_plink_broken(struct sta_info *sta);
@@ -12,6 +12,7 @@
#include "ieee80211_i.h"
#include "rate.h"
#include "mesh.h"
+#include "driver-ops.h"
#define PLINK_GET_LLID(p) (p + 2)
#define PLINK_GET_PLID(p) (p + 4)
@@ -391,13 +392,19 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
}
void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
- u8 *hw_addr,
- struct ieee802_11_elems *elems)
+ struct ieee80211_mgmt *mgmt,
+ struct ieee802_11_elems *elems,
+ struct ieee80211_rx_status *rx_status)
{
+ struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct sta_info *sta;
+ u64 tsf;
+
+ /* get tsf before entering rcu-read section */
+ tsf = drv_get_tsf(sdata->local, sdata);
rcu_read_lock();
- sta = mesh_peer_init(sdata, hw_addr, elems);
+ sta = mesh_peer_init(sdata, mgmt->sa, elems);
if (!sta)
goto out;
@@ -408,6 +415,9 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
rssi_threshold_check(sta, sdata))
mesh_plink_open(sta);
+ if (ifmsh->sync_ops)
+ ifmsh->sync_ops->rx_bcn(sta, mgmt, elems, rx_status, tsf);
+
ieee80211_mps_frame_release(sta, elems);
out:
rcu_read_unlock();
@@ -75,35 +75,23 @@ void mesh_sync_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
drv_set_tsf(local, sdata, tsf + tsfdelta);
}
-static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
- u16 stype,
- struct ieee80211_mgmt *mgmt,
- struct ieee802_11_elems *elems,
- struct ieee80211_rx_status *rx_status)
+static void mesh_sync_offset_rx_bcn(struct sta_info *sta,
+ struct ieee80211_mgmt *mgmt,
+ struct ieee802_11_elems *elems,
+ struct ieee80211_rx_status *rx_status,
+ u64 t_r)
{
+ struct ieee80211_sub_if_data *sdata = sta->sdata;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct ieee80211_local *local = sdata->local;
- struct sta_info *sta;
- u64 t_t, t_r;
+ u64 t_t;
WARN_ON(ifmsh->mesh_sp_id != IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET);
/* standard mentions only beacons */
- if (stype != IEEE80211_STYPE_BEACON)
+ if (!ieee80211_is_beacon(mgmt->frame_control))
return;
- /* The current tsf is a first approximation for the timestamp
- * for the received beacon. Further down we try to get a
- * better value from the rx_status->mactime field if
- * available. Also we have to call drv_get_tsf() before
- * entering the rcu-read section.*/
- t_r = drv_get_tsf(local, sdata);
-
- rcu_read_lock();
- sta = sta_info_get(sdata, mgmt->sa);
- if (!sta)
- goto no_sync;
-
/* check offset sync conditions (13.13.2.2.1)
*
* TODO also sync to
@@ -113,11 +101,15 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
if (elems->mesh_config && mesh_peer_tbtt_adjusting(elems)) {
clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
msync_dbg(sdata, "STA %pM : is adjusting TBTT\n", sta->sta.addr);
- goto no_sync;
+ return;
}
+ /*
+ * The current tsf is a first approximation of the beacon RX time.
+ * If available, get a better value from the rx_status->mactime field
+ * (time when timestamp field was received).
+ */
if (ieee80211_have_rx_timestamp(rx_status))
- /* time when timestamp field was received */
t_r = ieee80211_calculate_rx_timestamp(local, rx_status,
24 + 12 +
elems->total_len +
@@ -146,11 +138,9 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
sta->sta.addr,
(long long) t_clockdrift);
clear_sta_flag(sta, WLAN_STA_TOFFSET_KNOWN);
- goto no_sync;
+ return;
}
- rcu_read_unlock();
-
spin_lock_bh(&ifmsh->sync_offset_lock);
if (t_clockdrift >
ifmsh->sync_offset_clockdrift_max)
@@ -165,12 +155,7 @@ static void mesh_sync_offset_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
"STA %pM : offset was invalid, sta->t_offset=%lld\n",
sta->sta.addr,
(long long) sta->t_offset);
- rcu_read_unlock();
}
- return;
-
-no_sync:
- rcu_read_unlock();
}
static void mesh_sync_offset_adjust_tbtt(struct ieee80211_sub_if_data *sdata)
@@ -212,7 +197,7 @@ static const struct sync_method sync_methods[] = {
{
.method = IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET,
.ops = {
- .rx_bcn_presp = &mesh_sync_offset_rx_bcn_presp,
+ .rx_bcn = &mesh_sync_offset_rx_bcn,
.adjust_tbtt = &mesh_sync_offset_adjust_tbtt,
}
},
Move the beacon handler into mesh_neighbour_update where the STA pointer is already available. This avoids additional overhead and simplifies the handler. The repositioning will also benefit mesh PS which uses the T_offset value right after it has been updated. Rename the handler to better reflect its purpose. Signed-off-by: Marco Porsch <marco@cozybit.com> --- net/mac80211/ieee80211_i.h | 10 +++++----- net/mac80211/mesh.c | 8 ++------ net/mac80211/mesh.h | 5 +++-- net/mac80211/mesh_plink.c | 16 ++++++++++++--- net/mac80211/mesh_sync.c | 47 +++++++++++++++----------------------------- 5 files changed, 39 insertions(+), 47 deletions(-)