diff mbox

[05/11] rt2800: move GPIO_SWITCH setup to 3390 specific rfcsr init

Message ID 1365519930-3230-6-git-send-email-stf_xl@wp.pl (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Stanislaw Gruszka April 9, 2013, 3:05 p.m. UTC
From: Stanislaw Gruszka <stf_xl@wp.pl>

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
---
 drivers/net/wireless/rt2x00/rt2800lib.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)

Comments

Gertjan van Wingerde April 14, 2013, 8:16 p.m. UTC | #1
(Resending as the message didn't seem to end up on the mailing list)


> Hi Stanislaw,
> 
> Looks good to me. When you repost the series with all comments fixed, you can add my acked-by.
> 
> Sent from my iPad
> 
> On 9 apr. 2013, at 17:05, stf_xl@wp.pl wrote:
> 
>> From: Stanislaw Gruszka <stf_xl@wp.pl>
>> 
>> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
>> ---
>> drivers/net/wireless/rt2x00/rt2800lib.c |   12 +++++++-----
>> 1 files changed, 7 insertions(+), 5 deletions(-)
>> 
>> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
>> index 216ceb6..83554da 100644
>> --- a/drivers/net/wireless/rt2x00/rt2800lib.c
>> +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
>> @@ -4668,6 +4668,8 @@ static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
>> 
>> static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
>> {
>> +    u32 reg;
>> +
>>   rt2800_rfcsr_write(rt2x00dev, 0, 0xa0);
>>   rt2800_rfcsr_write(rt2x00dev, 1, 0xe1);
>>   rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
>> @@ -4700,6 +4702,10 @@ static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
>>   rt2800_rfcsr_write(rt2x00dev, 29, 0x8f);
>>   rt2800_rfcsr_write(rt2x00dev, 30, 0x20);
>>   rt2800_rfcsr_write(rt2x00dev, 31, 0x0f);
>> +
>> +    rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
>> +    rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
>> +    rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
>> }
>> 
>> static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
>> @@ -4985,11 +4991,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
>>   }
>> 
>> 
>> -    if (rt2x00_rt(rt2x00dev, RT3390)) {
>> -        rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
>> -        rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
>> -        rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
>> -    } else if (rt2x00_rt(rt2x00dev, RT3572)) {
>> +    if (rt2x00_rt(rt2x00dev, RT3572)) {
>>       rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
>>       rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
>>       rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);
>> -- 
>> 1.7.4.4
>> 
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index 216ceb6..83554da 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -4668,6 +4668,8 @@  static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev)
 
 static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
 {
+	u32 reg;
+
 	rt2800_rfcsr_write(rt2x00dev, 0, 0xa0);
 	rt2800_rfcsr_write(rt2x00dev, 1, 0xe1);
 	rt2800_rfcsr_write(rt2x00dev, 2, 0xf1);
@@ -4700,6 +4702,10 @@  static void rt2800_init_rfcsr_3390(struct rt2x00_dev *rt2x00dev)
 	rt2800_rfcsr_write(rt2x00dev, 29, 0x8f);
 	rt2800_rfcsr_write(rt2x00dev, 30, 0x20);
 	rt2800_rfcsr_write(rt2x00dev, 31, 0x0f);
+
+	rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
+	rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
+	rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
 }
 
 static void rt2800_init_rfcsr_3572(struct rt2x00_dev *rt2x00dev)
@@ -4985,11 +4991,7 @@  static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
 	}
 
 
-	if (rt2x00_rt(rt2x00dev, RT3390)) {
-		rt2800_register_read(rt2x00dev, GPIO_SWITCH, &reg);
-		rt2x00_set_field32(&reg, GPIO_SWITCH_5, 0);
-		rt2800_register_write(rt2x00dev, GPIO_SWITCH, reg);
-	} else if (rt2x00_rt(rt2x00dev, RT3572)) {
+	if (rt2x00_rt(rt2x00dev, RT3572)) {
 		rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr);
 		rt2x00_set_field8(&rfcsr, RFCSR6_R2, 1);
 		rt2800_rfcsr_write(rt2x00dev, 6, rfcsr);