@@ -521,6 +521,29 @@ void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev)
}
EXPORT_SYMBOL_GPL(rt2800_disable_wpdma);
+void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev,
+ unsigned short *txwi_size,
+ unsigned short *rxwi_size)
+{
+ switch (rt2x00dev->chip.rt) {
+ case RT3593:
+ *txwi_size = TXWI_DESC_SIZE_4WORDS;
+ *rxwi_size = RXWI_DESC_SIZE_5WORDS;
+ break;
+
+ case RT5592:
+ *txwi_size = TXWI_DESC_SIZE_5WORDS;
+ *rxwi_size = RXWI_DESC_SIZE_6WORDS;
+ break;
+
+ default:
+ *txwi_size = TXWI_DESC_SIZE_4WORDS;
+ *rxwi_size = RXWI_DESC_SIZE_4WORDS;
+ break;
+ }
+}
+EXPORT_SYMBOL_GPL(rt2800_get_txwi_rxwi_size);
+
static bool rt2800_check_firmware_crc(const u8 *data, const size_t len)
{
u16 fw_crc;
@@ -226,4 +226,8 @@ int rt2800_get_survey(struct ieee80211_hw *hw, int idx,
struct survey_info *survey);
void rt2800_disable_wpdma(struct rt2x00_dev *rt2x00dev);
+void rt2800_get_txwi_rxwi_size(struct rt2x00_dev *rt2x00dev,
+ unsigned short *txwi_size,
+ unsigned short *rxwi_size);
+
#endif /* RT2800LIB_H */
@@ -1223,12 +1223,17 @@ static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
static void rt2800pci_queue_init(struct data_queue *queue)
{
+ struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
+ unsigned short txwi_size, rxwi_size;
+
+ rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size);
+
switch (queue->qid) {
case QID_RX:
queue->limit = 128;
queue->data_size = AGGREGATION_SIZE;
queue->desc_size = RXD_DESC_SIZE;
- queue->winfo_size = RXWI_DESC_SIZE_4WORDS;
+ queue->winfo_size = rxwi_size;
queue->priv_size = sizeof(struct queue_entry_priv_mmio);
break;
@@ -1239,7 +1244,7 @@ static void rt2800pci_queue_init(struct data_queue *queue)
queue->limit = 64;
queue->data_size = AGGREGATION_SIZE;
queue->desc_size = TXD_DESC_SIZE;
- queue->winfo_size = TXWI_DESC_SIZE_4WORDS;
+ queue->winfo_size = txwi_size;
queue->priv_size = sizeof(struct queue_entry_priv_mmio);
break;
@@ -1247,7 +1252,7 @@ static void rt2800pci_queue_init(struct data_queue *queue)
queue->limit = 8;
queue->data_size = 0; /* No DMA required for beacons */
queue->desc_size = TXD_DESC_SIZE;
- queue->winfo_size = TXWI_DESC_SIZE_4WORDS;
+ queue->winfo_size = txwi_size;
queue->priv_size = sizeof(struct queue_entry_priv_mmio);
break;
@@ -854,16 +854,7 @@ static void rt2800usb_queue_init(struct data_queue *queue)
struct rt2x00_dev *rt2x00dev = queue->rt2x00dev;
unsigned short txwi_size, rxwi_size;
- if (rt2x00_rt(rt2x00dev, RT3593)) {
- txwi_size = TXWI_DESC_SIZE_4WORDS;
- rxwi_size = RXWI_DESC_SIZE_5WORDS;
- } else if (rt2x00_rt(rt2x00dev, RT5592)) {
- txwi_size = TXWI_DESC_SIZE_5WORDS;
- rxwi_size = RXWI_DESC_SIZE_6WORDS;
- } else {
- txwi_size = TXWI_DESC_SIZE_4WORDS;
- rxwi_size = RXWI_DESC_SIZE_4WORDS;
- }
+ rt2800_get_txwi_rxwi_size(rt2x00dev, &txwi_size, &rxwi_size);
switch (queue->qid) {
case QID_RX:
The rt2800pci driver uses the same [RT]XWI size for all chipsets, however some chips requires different values. The size of the [RT]XWI structures is a constant value for a given chipset and it does not depend on the underlying interface. Add a helper function which returns the correct values for the actual chipset and use the new helper both in the rt2800usb and in the rt2800pci drivers. This ensures that both drivers are using the correct values. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- drivers/net/wireless/rt2x00/rt2800lib.c | 23 +++++++++++++++++++++++ drivers/net/wireless/rt2x00/rt2800lib.h | 4 ++++ drivers/net/wireless/rt2x00/rt2800pci.c | 11 ++++++++--- drivers/net/wireless/rt2x00/rt2800usb.c | 11 +---------- 4 files changed, 36 insertions(+), 13 deletions(-)