diff mbox

[2/5] rt2x00: rt2800lib: optimize frequency offset adjustment

Message ID 1376685498-5167-3-git-send-email-juhosg@openwrt.org (mailing list archive)
State Superseded, archived
Headers show

Commit Message

Gabor Juhos Aug. 16, 2013, 8:38 p.m. UTC 
Don't write the new value into the register if it is
the same as the old value to avoid unncessary USB bus
traffic with USB devices. The change also saves a few
cycle on MMIO based devices.

Based on the DPO_RT5572_LinuxSTA_2.6.0.1_20120629
driver.

Reference:
  RTMPAdjustFrequencyOffset function in common/rt_rf.c

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
---
 drivers/net/wireless/rt2x00/rt2800lib.c |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index d4e6dea..c990a27 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -2495,13 +2495,17 @@  static void rt2800_config_channel_rf3053(struct rt2x00_dev *rt2x00dev,
 static void rt2800_adjust_freq_offset(struct rt2x00_dev *rt2x00dev)
 {
 	u8 freq_offset;
-	u8 rfcsr;
+	u8 rfcsr, prev_rfcsr;
 
 	freq_offset = rt2x00_get_field8(rt2x00dev->freq_offset, RFCSR17_CODE);
 	freq_offset = min_t(u8, freq_offset, FREQ_OFFSET_BOUND);
 
 	rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr);
+	prev_rfcsr = rfcsr;
 	rt2x00_set_field8(&rfcsr, RFCSR17_CODE, freq_offset);
+	if (rfcsr == prev_rfcsr)
+		return;
+
 	rt2800_rfcsr_write(rt2x00dev, 17, rfcsr);
 }