From patchwork Wed Sep 25 09:38:07 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Bartosz Markowski X-Patchwork-Id: 2941191 Return-Path: X-Original-To: patchwork-linux-wireless@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork2.web.kernel.org (Postfix) with ESMTP id C6A89BFF05 for ; Wed, 25 Sep 2013 09:38:54 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 4C54D2057D for ; Wed, 25 Sep 2013 09:38:52 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 8F41420417 for ; Wed, 25 Sep 2013 09:38:50 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754951Ab3IYJip (ORCPT ); Wed, 25 Sep 2013 05:38:45 -0400 Received: from ebb06.tieto.com ([131.207.168.38]:53485 "EHLO ebb06.tieto.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754861Ab3IYJic (ORCPT ); Wed, 25 Sep 2013 05:38:32 -0400 X-AuditID: 83cfa826-b7f408e000003a47-20-5242af135ba9 Received: from FIVLA-EXHUB02.eu.tieto.com ( [131.207.136.42]) by ebb06.tieto.com (SMTP Mailer) with SMTP id CF.82.14919.31FA2425; Wed, 25 Sep 2013 12:38:27 +0300 (EEST) Received: from uw000975.eu.tieto.com (10.28.19.100) by inbound.tieto.com (131.207.136.49) with Microsoft SMTP Server id 8.3.298.1; Wed, 25 Sep 2013 12:38:26 +0300 From: Bartosz Markowski To: CC: , Bartosz Markowski Subject: [PATCH 09/13] ath10k: split wmi_cmd_init path Date: Wed, 25 Sep 2013 11:38:07 +0200 Message-ID: <1380101891-18312-10-git-send-email-bartosz.markowski@tieto.com> X-Mailer: git-send-email 1.7.10 In-Reply-To: <1380101891-18312-1-git-send-email-bartosz.markowski@tieto.com> References: <1380101891-18312-1-git-send-email-bartosz.markowski@tieto.com> MIME-Version: 1.0 X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFrrFIsWRmVeSWpSXmKPExsXSfL5DS1d4vVOQwYT5RhaPLh1jtngy+TuL xZsVd9gdmD0+z7zL5rF5Sb3H501yAcxRXDYpqTmZZalF+nYJXBl3/uxjK5idWtHT0svSwPgw sIuRk0NCwETiwKkP7BC2mMSFe+vZuhi5OIQEVjFKnFmxhhHCWcYo8eD+IWaQKjYBU4n7G1aw gtgiAgoSvyZ9ZAOxmQXCJV5t/cUCYgsLmEmcOjYfzGYRUJXYMfcoI4jNK+AjcXr6KWaIbfIS T+/3gfVyAsWP7nsNdoWQgLdE0/TrrBD1ghInZz5hgZgvIXHwxQtmiBoNiTk7X7JMYBSYhaRs FpKyBYxMqxj5U5OSDMz0SjJTS/L1kvNzNzGCg3CF2g7GZw+kDjEKcDAq8fC+WOgYJMSaWFZc mXuIUZKDSUmU985apyAhvqT8lMqMxOKM+KLSnNTiQ4wSHMxKIrzhi4FyvCmJlVWpRfkwKWkO FiVx3g0dQJME0hNLUrNTUwtSi2CyMhwcShK8q0GGChalpqdWpGXmlCCkmTg4QYbzAA3/AFLD W1yQmFucmQ6RP8WoKCXOuwkkIQCSyCjNg+uFJYlXjOJArwjzngSp4gEmGLjuV0CDmYAGO3SA DS5JREhJNTD2ub4/9P7Vp3MWC8s+N7ZfLxQwP1rz5mfwpOZajeSdvZc/VUpZRNxb9eO779Zj Eap3OI74fxXUn2iSZuJSHRyZ2L5S1iyg8+/E40xdR2JCMlZpndhiWL26bLv+vKk/hCJk5PL/ z36ayezb0jWXPeOJ+I/X1+1fX5/Z7yK4ffOuSYyrwjvvrIlRYinOSDTUYi4qTgQAovytXO0C AAA= Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-wireless@vger.kernel.org X-Spam-Status: No, score=-8.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Due to API differences in initialization structures for main and 10.x firmwares we need to split the wmi_init_cmd and wmi_resource_config structures. This will be usefull also when setting the correct TARGET values, like: number of peers, vdevs, pdevs etc. Signed-off-by: Bartosz Markowski --- drivers/net/wireless/ath/ath10k/core.c | 6 +- drivers/net/wireless/ath/ath10k/wmi.c | 91 +++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 196 ++++++++++++++++++++++++++++++++ 3 files changed, 292 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 31860a6..3a56715 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -595,7 +595,11 @@ int ath10k_core_start(struct ath10k *ar) ath10k_info("firmware %s booted\n", ar->hw->wiphy->fw_version); - status = ath10k_wmi_cmd_init(ar); + if (test_bit(ATH10K_FW_FEATURE_10X, ar->fw_features)) + status = ath10k_wmi_10x_cmd_init(ar); + else + status = ath10k_wmi_cmd_init(ar); + if (status) { ath10k_err("could not send WMI init command (%d)\n", status); goto err_disconnect_htc; diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 4992ad1..f88a1d3 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -2019,6 +2019,97 @@ out: return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->wmi_init_cmdid); } +int ath10k_wmi_10x_cmd_init(struct ath10k *ar) +{ + struct wmi_init_cmd_10x *cmd; + struct sk_buff *buf; + struct wmi_resource_config_10x config = {}; + u32 len, val; + int i; + + config.num_vdevs = __cpu_to_le32(TARGET_NUM_VDEVS); + config.num_peers = __cpu_to_le32(TARGET_NUM_PEERS + TARGET_NUM_VDEVS); + config.num_peer_keys = __cpu_to_le32(TARGET_NUM_PEER_KEYS); + config.num_tids = __cpu_to_le32(TARGET_NUM_TIDS); + config.ast_skid_limit = __cpu_to_le32(TARGET_AST_SKID_LIMIT); + config.tx_chain_mask = __cpu_to_le32(TARGET_TX_CHAIN_MASK); + config.rx_chain_mask = __cpu_to_le32(TARGET_RX_CHAIN_MASK); + config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri_be = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_RX_TIMEOUT_HI_PRI); + config.rx_decap_mode = __cpu_to_le32(TARGET_RX_DECAP_MODE); + + config.scan_max_pending_reqs = + __cpu_to_le32(TARGET_SCAN_MAX_PENDING_REQS); + + config.bmiss_offload_max_vdev = + __cpu_to_le32(TARGET_BMISS_OFFLOAD_MAX_VDEV); + + config.roam_offload_max_vdev = + __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_VDEV); + + config.roam_offload_max_ap_profiles = + __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES); + + config.num_mcast_groups = __cpu_to_le32(TARGET_NUM_MCAST_GROUPS); + config.num_mcast_table_elems = + __cpu_to_le32(TARGET_NUM_MCAST_TABLE_ELEMS); + + config.mcast2ucast_mode = __cpu_to_le32(TARGET_MCAST2UCAST_MODE); + config.tx_dbg_log_size = __cpu_to_le32(TARGET_TX_DBG_LOG_SIZE); + config.num_wds_entries = __cpu_to_le32(TARGET_NUM_WDS_ENTRIES); + config.dma_burst_size = __cpu_to_le32(TARGET_DMA_BURST_SIZE); + config.mac_aggr_delim = __cpu_to_le32(TARGET_MAC_AGGR_DELIM); + + val = TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK; + config.rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(val); + + config.vow_config = __cpu_to_le32(TARGET_VOW_CONFIG); + + config.num_msdu_desc = __cpu_to_le32(TARGET_NUM_MSDU_DESC); + config.max_frag_entries = __cpu_to_le32(TARGET_MAX_FRAG_ENTRIES); + + len = sizeof(*cmd) + + (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks); + + buf = ath10k_wmi_alloc_skb(len); + if (!buf) + return -ENOMEM; + + cmd = (struct wmi_init_cmd_10x *)buf->data; + + if (ar->wmi.num_mem_chunks == 0) { + cmd->num_host_mem_chunks = 0; + goto out; + } + + ath10k_dbg(ATH10K_DBG_WMI, "wmi sending %d memory chunks info.\n", + __cpu_to_le32(ar->wmi.num_mem_chunks)); + + cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks); + + for (i = 0; i < ar->wmi.num_mem_chunks; i++) { + cmd->host_mem_chunks[i].ptr = + __cpu_to_le32(ar->wmi.mem_chunks[i].paddr); + cmd->host_mem_chunks[i].size = + __cpu_to_le32(ar->wmi.mem_chunks[i].len); + cmd->host_mem_chunks[i].req_id = + __cpu_to_le32(ar->wmi.mem_chunks[i].req_id); + + ath10k_dbg(ATH10K_DBG_WMI, + "wmi chunk %d len %d requested, addr 0x%x\n", + i, + cmd->host_mem_chunks[i].size, + cmd->host_mem_chunks[i].ptr); + } +out: + memcpy(&cmd->resource_config, &config, sizeof(config)); + + ath10k_dbg(ATH10K_DBG_WMI, "wmi init 10x\n"); + return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->wmi_init_cmdid); +} + static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg) { int len; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 8c67fb4..2f18349 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -1377,6 +1377,189 @@ struct wmi_resource_config { __le32 max_frag_entries; } __packed; +struct wmi_resource_config_10x { + /* number of virtual devices (VAPs) to support */ + __le32 num_vdevs; + + /* number of peer nodes to support */ + __le32 num_peers; + + /* number of keys per peer */ + __le32 num_peer_keys; + + /* total number of TX/RX data TIDs */ + __le32 num_tids; + + /* + * max skid for resolving hash collisions + * + * The address search table is sparse, so that if two MAC addresses + * result in the same hash value, the second of these conflicting + * entries can slide to the next index in the address search table, + * and use it, if it is unoccupied. This ast_skid_limit parameter + * specifies the upper bound on how many subsequent indices to search + * over to find an unoccupied space. + */ + __le32 ast_skid_limit; + + /* + * the nominal chain mask for transmit + * + * The chain mask may be modified dynamically, e.g. to operate AP + * tx with a reduced number of chains if no clients are associated. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of tx chains. + */ + __le32 tx_chain_mask; + + /* + * the nominal chain mask for receive + * + * The chain mask may be modified dynamically, e.g. for a client + * to use a reduced number of chains for receive if the traffic to + * the client is low enough that it doesn't require downlink MIMO + * or antenna diversity. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of rx chains. + */ + __le32 rx_chain_mask; + + /* + * what rx reorder timeout (ms) to use for the AC + * + * Each WMM access class (voice, video, best-effort, background) will + * have its own timeout value to dictate how long to wait for missing + * rx MPDUs to arrive before flushing subsequent MPDUs that have + * already been received. + * This parameter specifies the timeout in milliseconds for each + * class. + */ + __le32 rx_timeout_pri_vi; + __le32 rx_timeout_pri_vo; + __le32 rx_timeout_pri_be; + __le32 rx_timeout_pri_bk; + + /* + * what mode the rx should decap packets to + * + * MAC can decap to RAW (no decap), native wifi or Ethernet types + * THis setting also determines the default TX behavior, however TX + * behavior can be modified on a per VAP basis during VAP init + */ + __le32 rx_decap_mode; + + /* what is the maximum scan requests than can be queued */ + __le32 scan_max_pending_reqs; + + /* maximum VDEV that could use BMISS offload */ + __le32 bmiss_offload_max_vdev; + + /* maximum VDEV that could use offload roaming */ + __le32 roam_offload_max_vdev; + + /* maximum AP profiles that would push to offload roaming */ + __le32 roam_offload_max_ap_profiles; + + /* + * how many groups to use for mcast->ucast conversion + * + * The target's WAL maintains a table to hold information regarding + * which peers belong to a given multicast group, so that if + * multicast->unicast conversion is enabled, the target can convert + * multicast tx frames to a series of unicast tx frames, to each + * peer within the multicast group. + This num_mcast_groups configuration parameter tells the target how + * many multicast groups to provide storage for within its multicast + * group membership table. + */ + __le32 num_mcast_groups; + + /* + * size to alloc for the mcast membership table + * + * This num_mcast_table_elems configuration parameter tells the + * target how many peer elements it needs to provide storage for in + * its multicast group membership table. + * These multicast group membership table elements are shared by the + * multicast groups stored within the table. + */ + __le32 num_mcast_table_elems; + + /* + * whether/how to do multicast->unicast conversion + * + * This configuration parameter specifies whether the target should + * perform multicast --> unicast conversion on transmit, and if so, + * what to do if it finds no entries in its multicast group + * membership table for the multicast IP address in the tx frame. + * Configuration value: + * 0 -> Do not perform multicast to unicast conversion. + * 1 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * drop the frame. + * 2 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * transmit the frame as multicast. + */ + __le32 mcast2ucast_mode; + + /* + * how much memory to allocate for a tx PPDU dbg log + * + * This parameter controls how much memory the target will allocate + * to store a log of tx PPDU meta-information (how large the PPDU + * was, when it was sent, whether it was successful, etc.) + */ + __le32 tx_dbg_log_size; + + /* how many AST entries to be allocated for WDS */ + __le32 num_wds_entries; + + /* + * MAC DMA burst size, e.g., For target PCI limit can be + * 0 -default, 1 256B + */ + __le32 dma_burst_size; + + /* + * Fixed delimiters to be inserted after every MPDU to + * account for interface latency to avoid underrun. + */ + __le32 mac_aggr_delim; + + /* + * determine whether target is responsible for detecting duplicate + * non-aggregate MPDU and timing out stale fragments. + * + * A-MPDU reordering is always performed on the target. + * + * 0: target responsible for frag timeout and dup checking + * 1: host responsible for frag timeout and dup checking + */ + __le32 rx_skip_defrag_timeout_dup_detection_check; + + /* + * Configuration for VoW : + * No of Video Nodes to be supported + * and Max no of descriptors for each Video link (node). + */ + __le32 vow_config; + + /* Number of msdu descriptors target should use */ + __le32 num_msdu_desc; + + /* + * Max. number of Tx fragments per MSDU + * This parameter controls the max number of Tx fragments per MSDU. + * This is sent by the target as part of the WMI_SERVICE_READY event + * and is overriden by the OS shim as required. + */ + __le32 max_frag_entries; +} __packed; + + #define NUM_UNITS_IS_NUM_VDEVS 0x1 #define NUM_UNITS_IS_NUM_PEERS 0x2 @@ -1401,6 +1584,18 @@ struct wmi_init_cmd { struct host_memory_chunk host_mem_chunks[1]; } __packed; +/* _10x stucture is from 10.X FW API */ +struct wmi_init_cmd_10x { + struct wmi_resource_config_10x resource_config; + __le32 num_host_mem_chunks; + + /* + * variable number of host memory chunks. + * This should be the last element in the structure + */ + struct host_memory_chunk host_mem_chunks[1]; +} __packed; + /* TLV for channel list */ struct wmi_chan_list { __le32 tag; /* WMI_CHAN_LIST_TAG */ @@ -3435,6 +3630,7 @@ int ath10k_wmi_pdev_set_regdomain(struct ath10k *ar, u16 rd, u16 rd2g, int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id, u32 value); int ath10k_wmi_cmd_init(struct ath10k *ar); +int ath10k_wmi_10x_cmd_init(struct ath10k *ar); int ath10k_wmi_start_scan(struct ath10k *ar, const struct wmi_start_scan_arg *); void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *); int ath10k_wmi_stop_scan(struct ath10k *ar,