@@ -520,6 +520,9 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
INIT_WORK(&ar->offchan_tx_work, ath10k_offchan_tx_work);
skb_queue_head_init(&ar->offchan_tx_queue);
+ INIT_WORK(&ar->wmi_mgmt_tx_work, ath10k_mgmt_over_wmi_tx_work);
+ skb_queue_head_init(&ar->wmi_mgmt_tx_queue);
+
init_waitqueue_head(&ar->event_queue);
INIT_WORK(&ar->restart_work, ath10k_core_restart);
@@ -43,15 +43,17 @@
/* Antenna noise floor */
#define ATH10K_DEFAULT_NOISE_FLOOR -95
+#define ATH10K_MAX_NUM_MGMT_PENDING 16
+
struct ath10k;
struct ath10k_skb_cb {
dma_addr_t paddr;
bool is_mapped;
bool is_aborted;
+ u8 vdev_id;
struct {
- u8 vdev_id;
u8 tid;
bool is_offchan;
@@ -284,6 +286,9 @@ enum ath10k_fw_features {
/* firmware from 10X branch */
ATH10K_FW_FEATURE_WMI_10X = 1,
+ /* firmware support tx frame management over WMI, otherwise it's HTT */
+ ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX = 2,
+
/* keep last */
ATH10K_FW_FEATURE_COUNT,
};
@@ -393,6 +398,9 @@ struct ath10k {
struct completion offchan_tx_completed;
struct sk_buff *offchan_tx_skb;
+ struct work_struct wmi_mgmt_tx_work;
+ struct sk_buff_head wmi_mgmt_tx_queue;
+
enum ath10k_state state;
struct work_struct restart_work;
@@ -308,7 +308,7 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
struct sk_buff *txdesc = NULL;
struct htt_cmd *cmd;
struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
- u8 vdev_id = skb_cb->htt.vdev_id;
+ u8 vdev_id = skb_cb->vdev_id;
int len = 0;
int msdu_id = -1;
int res;
@@ -384,7 +384,7 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu)
struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu);
struct sk_buff *txdesc = NULL;
bool use_frags;
- u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id;
+ u8 vdev_id = ATH10K_SKB_CB(msdu)->vdev_id;
u8 tid;
int prefetch_len, desc_len;
int msdu_id = -1;
@@ -1486,7 +1486,7 @@ static void ath10k_tx_h_add_p2p_noa_ie(struct ath10k *ar, struct sk_buff *skb)
static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
{
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- int ret;
+ int ret = 0;
if (ar->htt.target_version_major >= 3) {
/* Since HTT 3.0 there is no separate mgmt tx command */
@@ -1494,16 +1494,32 @@ static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb)
goto exit;
}
- if (ieee80211_is_mgmt(hdr->frame_control))
- ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
- else if (ieee80211_is_nullfunc(hdr->frame_control))
+ if (ieee80211_is_mgmt(hdr->frame_control)) {
+ if (test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+ ar->fw_features)) {
+ if (skb_queue_len(&ar->wmi_mgmt_tx_queue) >=
+ ATH10K_MAX_NUM_MGMT_PENDING) {
+ ath10k_warn("wmi mgmt_tx queue limit reached\n");
+ ret = -EBUSY;
+ goto exit;
+ }
+
+ skb_queue_tail(&ar->wmi_mgmt_tx_queue, skb);
+ ieee80211_queue_work(ar->hw, &ar->wmi_mgmt_tx_work);
+ } else {
+ ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
+ }
+ } else if (!test_bit(ATH10K_FW_FEATURE_HAS_WMI_MGMT_TX,
+ ar->fw_features) &&
+ ieee80211_is_nullfunc(hdr->frame_control)) {
/* FW does not report tx status properly for NullFunc frames
* unless they are sent through mgmt tx path. mac80211 sends
- * those frames when it detects link/beacon loss and depends on
- * the tx status to be correct. */
+ * those frames when it detects link/beacon loss and depends
+ * on the tx status to be correct. */
ret = ath10k_htt_mgmt_tx(&ar->htt, skb);
- else
+ } else {
ret = ath10k_htt_tx(&ar->htt, skb);
+ }
exit:
if (ret) {
@@ -1554,7 +1570,7 @@ void ath10k_offchan_tx_work(struct work_struct *work)
hdr = (struct ieee80211_hdr *)skb->data;
peer_addr = ieee80211_get_DA(hdr);
- vdev_id = ATH10K_SKB_CB(skb)->htt.vdev_id;
+ vdev_id = ATH10K_SKB_CB(skb)->vdev_id;
spin_lock_bh(&ar->data_lock);
peer = ath10k_peer_find(ar, vdev_id, peer_addr);
@@ -1596,6 +1612,36 @@ void ath10k_offchan_tx_work(struct work_struct *work)
}
}
+void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar)
+{
+ struct sk_buff *skb;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+ if (!skb)
+ break;
+
+ ieee80211_free_txskb(ar->hw, skb);
+ }
+}
+
+void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work)
+{
+ struct ath10k *ar = container_of(work, struct ath10k, wmi_mgmt_tx_work);
+ struct sk_buff *skb;
+ int ret;
+
+ for (;;) {
+ skb = skb_dequeue(&ar->wmi_mgmt_tx_queue);
+ if (!skb)
+ break;
+
+ ret = ath10k_wmi_mgmt_tx(ar, skb);
+ if (ret)
+ ath10k_warn("wmi mgmt_tx failed (%d)\n", ret);
+ }
+}
+
/************/
/* Scanning */
/************/
@@ -1754,14 +1800,14 @@ static void ath10k_tx(struct ieee80211_hw *hw,
ath10k_tx_h_seq_no(skb);
}
+ ATH10K_SKB_CB(skb)->vdev_id = vdev_id;
ATH10K_SKB_CB(skb)->htt.is_offchan = false;
- ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id;
ATH10K_SKB_CB(skb)->htt.tid = tid;
if (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) {
spin_lock_bh(&ar->data_lock);
ATH10K_SKB_CB(skb)->htt.is_offchan = true;
- ATH10K_SKB_CB(skb)->htt.vdev_id = ar->scan.vdev_id;
+ ATH10K_SKB_CB(skb)->vdev_id = ar->scan.vdev_id;
spin_unlock_bh(&ar->data_lock);
ath10k_dbg(ATH10K_DBG_MAC, "queued offchannel skb %p\n", skb);
@@ -1783,6 +1829,7 @@ void ath10k_halt(struct ath10k *ar)
del_timer_sync(&ar->scan.timeout);
ath10k_offchan_tx_purge(ar);
+ ath10k_mgmt_over_wmi_tx_purge(ar);
ath10k_peer_cleanup_all(ar);
ath10k_core_stop(ar);
ath10k_hif_power_down(ar);
@@ -1859,7 +1906,10 @@ static void ath10k_stop(struct ieee80211_hw *hw)
ar->state = ATH10K_STATE_OFF;
mutex_unlock(&ar->conf_mutex);
+ ath10k_mgmt_over_wmi_tx_purge(ar);
+
cancel_work_sync(&ar->offchan_tx_work);
+ cancel_work_sync(&ar->wmi_mgmt_tx_work);
cancel_work_sync(&ar->restart_work);
}
@@ -34,6 +34,8 @@ struct ath10k_vif *ath10k_get_arvif(struct ath10k *ar, u32 vdev_id);
void ath10k_reset_scan(unsigned long ptr);
void ath10k_offchan_tx_purge(struct ath10k *ar);
void ath10k_offchan_tx_work(struct work_struct *work);
+void ath10k_mgmt_over_wmi_tx_purge(struct ath10k *ar);
+void ath10k_mgmt_over_wmi_tx_work(struct work_struct *work);
void ath10k_halt(struct ath10k *ar);
static inline struct ath10k_vif *ath10k_vif_to_arvif(struct ieee80211_vif *vif)
@@ -410,6 +410,57 @@ static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb,
return ret;
}
+int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb)
+{
+ int ret = 0;
+ struct wmi_mgmt_tx_cmd *cmd;
+ struct ieee80211_hdr *hdr;
+ struct sk_buff *wmi_skb;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ int len;
+ u16 fc;
+
+ hdr = (struct ieee80211_hdr *)skb->data;
+ fc = le16_to_cpu(hdr->frame_control);
+
+ if (WARN_ON_ONCE(!ieee80211_is_mgmt(hdr->frame_control)))
+ return -EINVAL;
+
+ len = sizeof(cmd->hdr) + skb->len;
+ len = round_up(len, 4);
+
+ wmi_skb = ath10k_wmi_alloc_skb(len);
+ if (!wmi_skb)
+ return -ENOMEM;
+
+ cmd = (struct wmi_mgmt_tx_cmd *)wmi_skb->data;
+
+ cmd->hdr.vdev_id = __cpu_to_le32(ATH10K_SKB_CB(skb)->vdev_id);
+ cmd->hdr.tx_rate = 0;
+ cmd->hdr.tx_power = 0;
+ cmd->hdr.buf_len = __cpu_to_le32((u32)(skb->len));
+
+ memcpy(cmd->hdr.peer_macaddr.addr, ieee80211_get_DA(hdr), ETH_ALEN);
+ memcpy(cmd->buf, skb->data, skb->len);
+
+ ath10k_dbg(ATH10K_DBG_WMI, "wmi mgmt tx skb %p len %d ftype %02x stype %02x\n",
+ wmi_skb, wmi_skb->len, fc & IEEE80211_FCTL_FTYPE,
+ fc & IEEE80211_FCTL_STYPE);
+
+ /* Send the management frame buffer to the target */
+ ret = ath10k_wmi_cmd_send(ar, wmi_skb, ar->wmi.cmd->mgmt_tx_cmdid);
+ if (ret) {
+ dev_kfree_skb_any(skb);
+ return ret;
+ }
+
+ /* TODO: report tx status to mac80211 - temporary just ACK */
+ info->flags |= IEEE80211_TX_STAT_ACK;
+ ieee80211_tx_status_irqsafe(ar->hw, skb);
+
+ return ret;
+}
+
static int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb)
{
struct wmi_scan_event *event = (struct wmi_scan_event *)skb->data;
@@ -3483,5 +3483,6 @@ int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar,
int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id);
int ath10k_wmi_force_fw_hang(struct ath10k *ar,
enum wmi_force_fw_hang_type type, u32 delay_ms);
+int ath10k_wmi_mgmt_tx(struct ath10k *ar, struct sk_buff *skb);
#endif /* _WMI_H_ */
This is still the only way to submit mgmt frames in case of 10.X firmware. This patch introduces wmi_mgmt_tx queue, because of the fact WMI command can block. This is a problem for ath10k_tx_htt(), since it's called from atomic context. The skb queue and worker are introduced to move the mgmt frame handling out of .tx callback context and not block. Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> --- drivers/net/wireless/ath/ath10k/core.c | 3 ++ drivers/net/wireless/ath/ath10k/core.h | 10 ++++- drivers/net/wireless/ath/ath10k/htt_tx.c | 4 +- drivers/net/wireless/ath/ath10k/mac.c | 70 +++++++++++++++++++++++++----- drivers/net/wireless/ath/ath10k/mac.h | 2 + drivers/net/wireless/ath/ath10k/wmi.c | 51 ++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/wmi.h | 1 + 7 files changed, 128 insertions(+), 13 deletions(-)