@@ -246,6 +246,7 @@ static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
}
}
+#ifdef CONFIG_PCI
static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
enum dev_state state)
{
@@ -304,7 +305,6 @@ static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
return retval;
}
-#ifdef CONFIG_PCI
/*
* Device probe functions.
*/
@@ -480,6 +480,45 @@ MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
MODULE_LICENSE("GPL");
#if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X)
+static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev,
+ enum dev_state state)
+{
+ int retval = 0;
+
+ switch (state) {
+ case STATE_RADIO_ON:
+ retval = rt2800pci_enable_radio(rt2x00dev);
+ break;
+
+ case STATE_RADIO_OFF:
+ rt2800pci_disable_radio(rt2x00dev);
+ break;
+
+ case STATE_RADIO_IRQ_ON:
+ case STATE_RADIO_IRQ_OFF:
+ rt2800mmio_toggle_irq(rt2x00dev, state);
+ break;
+
+ case STATE_DEEP_SLEEP:
+ case STATE_SLEEP:
+ case STATE_STANDBY:
+ case STATE_AWAKE:
+ /* These states are not supported, but don't report an error */
+ retval = 0;
+ break;
+
+ default:
+ retval = -ENOTSUPP;
+ break;
+ }
+
+ if (unlikely(retval))
+ rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n",
+ state, retval);
+
+ return retval;
+}
+
static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev)
{
void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE);
@@ -578,7 +617,7 @@ static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = {
.uninitialize = rt2x00mmio_uninitialize,
.get_entry_state = rt2800mmio_get_entry_state,
.clear_entry = rt2800mmio_clear_entry,
- .set_device_state = rt2800pci_set_device_state,
+ .set_device_state = rt2800soc_set_device_state,
.rfkill_poll = rt2800_rfkill_poll,
.link_stats = rt2800_link_stats,
.reset_tuner = rt2800_reset_tuner,
The 'rt2800pci_set_state' function uses MCU commands to set the device state, however these have no effect on SoC devices. Use a different set_state callback which does not use the MCU fcuntions. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- drivers/net/wireless/rt2x00/rt2800pci.c | 43 +++++++++++++++++++++++++++++-- 1 file changed, 41 insertions(+), 2 deletions(-)