diff mbox

[3/7,V2] rtl818x: check for pci_map_single() success when initializing RX ring

Message ID 1393088243-22740-1-git-send-email-andrea.merello@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Andrea Merello Feb. 22, 2014, 4:57 p.m. UTC 
From: andrea merello <andrea.merello@gmail.com>

During initialization a number of RX skbs are allocated and mapped
for DMA.
Currently if pci_map_single() fails, it will result in passing to the
HW a wrong DMA address (to write to!).

This patch adds check for this condition and eventually causes the
driver not to initialize, avoiding at least dangerous DMAs.

Signed-off-by: Andrea Merello <andrea.merello@gmail.com>
---
 drivers/net/wireless/rtl818x/rtl8180/dev.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c
index bf59ff9..0102da2 100644
--- a/drivers/net/wireless/rtl818x/rtl8180/dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c
@@ -483,6 +483,13 @@  static int rtl8180_init_rx_ring(struct ieee80211_hw *dev)
 		mapping = (dma_addr_t *)skb->cb;
 		*mapping = pci_map_single(priv->pdev, skb_tail_pointer(skb),
 					  MAX_RX_SIZE, PCI_DMA_FROMDEVICE);
+
+		if (pci_dma_mapping_error(priv->pdev, *mapping)) {
+			kfree_skb(skb);
+			wiphy_err(dev->wiphy, "Cannot map DMA for RX skb\n");
+			return -ENOMEM;
+		}
+
 		entry->rx_buf = cpu_to_le32(*mapping);
 		entry->flags = cpu_to_le32(RTL818X_RX_DESC_FLAG_OWN |
 					   MAX_RX_SIZE);