@@ -1090,6 +1090,7 @@ static int rtl8180_start(struct ieee80211_hw *dev)
/* CW is not on per-packet basis.
* in rtl8185 the CW_VALUE reg is used.
+ * in rtl8187se the AC param regs are used.
*/
reg &= ~RTL818X_CW_CONF_PERPACKET_CW;
/* retry limit IS on per-packet basis.
@@ -1279,6 +1280,49 @@ static int rtl8180_config(struct ieee80211_hw *dev, u32 changed)
return 0;
}
+static void rtl8187se_conf_ac_parm(struct ieee80211_hw *dev, u8 queue)
+{
+ const struct ieee80211_tx_queue_params *params;
+ struct rtl8180_priv *priv = dev->priv;
+
+ /* hw value */
+ u32 ac_param;
+
+ u8 aifs;
+ u8 txop;
+ u8 cw_min, cw_max;
+
+ params = &priv->queue_param[queue];
+
+ cw_min = fls(params->cw_min);
+ cw_max = fls(params->cw_max);
+
+ aifs = 10 + params->aifs * priv->slot_time;
+
+ /* TODO: check if txop HW is in us (mult by 32) */
+ txop = params->txop;
+
+ ac_param = txop << AC_PARAM_TXOP_LIMIT_SHIFT |
+ cw_max << AC_PARAM_ECW_MAX_SHIFT |
+ cw_min << AC_PARAM_ECW_MIN_SHIFT |
+ aifs << AC_PARAM_AIFS_SHIFT;
+
+ switch (queue) {
+ case IEEE80211_AC_BK:
+ rtl818x_iowrite32(priv, &priv->map->AC_BK_PARAM, ac_param);
+ break;
+ case IEEE80211_AC_BE:
+ rtl818x_iowrite32(priv, &priv->map->AC_BE_PARAM, ac_param);
+ break;
+ case IEEE80211_AC_VI:
+ rtl818x_iowrite32(priv, &priv->map->AC_VI_PARAM, ac_param);
+ break;
+ case IEEE80211_AC_VO:
+ rtl818x_iowrite32(priv, &priv->map->AC_VO_PARAM, ac_param);
+ break;
+ }
+}
+
static int rtl8180_conf_tx(struct ieee80211_hw *dev,
struct ieee80211_vif *vif, u16 queue,
const struct ieee80211_tx_queue_params *params)
@@ -1293,8 +1337,12 @@ static int rtl8180_conf_tx(struct ieee80211_hw *dev,
cw_min = fls(params->cw_min);
cw_max = fls(params->cw_max);
- rtl818x_iowrite8(priv, &priv->map->CW_VAL, (cw_max << 4) | cw_min);
-
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ priv->queue_param[queue] = *params;
+ rtl8187se_conf_ac_parm(dev, queue);
+ } else
+ rtl818x_iowrite8(priv, &priv->map->CW_VAL,
+ (cw_max << 4) | cw_min);
return 0;
}
@@ -1396,6 +1444,16 @@ static void rtl8180_bss_info_changed(struct ieee80211_hw *dev,
&priv->rates[0])) - 10;
rtl8180_conf_erp(dev, info);
+
+ /* mac80211 supplies aifs_n to driver and calls
+ * conf_tx callback whether aifs_n changes, NOT
+ * when aifs changes.
+ * Aifs should be recalculated if slot changes.
+ */
+ if (priv->chip_family == RTL818X_CHIP_FAMILY_RTL8187SE) {
+ for (i = 0; i < 4; i++)
+ rtl8187se_conf_ac_parm(dev, i);
+ }
}
if (changed & BSS_CHANGED_BEACON_ENABLED)
@@ -117,6 +117,7 @@ struct rtl8180_priv {
struct ieee80211_channel channels[14];
struct ieee80211_rate rates[12];
struct ieee80211_supported_band band;
+ struct ieee80211_tx_queue_params queue_param[4];
struct pci_dev *pdev;
u32 rx_conf;
u8 slot_time;
Introduce a new function to configure AC parameters for TX queues on rtl8187se cards, and hook it onto mac80211 in order to enable WMM support. Signed-off-by: Andrea Merello <andrea.merello@gmail.com> --- drivers/net/wireless/rtl818x/rtl8180/dev.c | 62 +++++++++++++++++++++++++- drivers/net/wireless/rtl818x/rtl8180/rtl8180.h | 1 + 2 files changed, 61 insertions(+), 2 deletions(-)