@@ -194,6 +194,36 @@ rdeeprom
Example:
echo "0 20" > rdeeprom : Read 20 bytes of EEPROM data from offset 0
+hscfg
+ This command is used to debug/simulate host sleep feature using
+ different configuration parameters.
+
+ Usage:
+ echo "<condition> [GPIO# [gap]]]" > hscfg
+ cat hscfg
+
+ where the parameters are,
+ <condition>: bit 0 = 1 -- broadcast data
+ bit 1 = 1 -- unicast data
+ bit 2 = 1 -- mac event
+ bit 3 = 1 -- multicast data
+ [GPIO#]: pin number of GPIO used to wakeup the host.
+ GPIO pin# (e.g. 0-7) or 0xff (interface, e.g. SDIO
+ will be used instead).
+ [gap]: the gap in milliseconds between wakeup signal and
+ wakeup event or 0xff for special setting (host
+ acknowledge required) when GPIO is used to wakeup host.
+
+ Examples:
+ echo "-1" > hscfg : Cancel host sleep mode
+ echo "3" > hscfg : Broadcast and unicast data;
+ Use GPIO and gap set previously
+ echo "2 3" > hscfg : Unicast data and GPIO 3;
+ Use gap set previously
+ echo "2 1 160" > hscfg : Unicast data, GPIO 1 and gap 160 ms
+ echo "2 1 0xff" > hscfg : Unicast data, GPIO 1; Wait for host
+ to ack before sending wakeup event
+
getlog
This command is used to get the statistics available in the station.
Usage:
@@ -692,6 +692,97 @@ done:
return ret;
}
+/* Proc hscfg file write handler
+ * This function can be used to configure the host sleep parameters.
+ */
+static ssize_t
+mwifiex_hscfg_write(struct file *file, const char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct mwifiex_private *priv = (void *)file->private_data;
+ unsigned long addr = get_zeroed_page(GFP_KERNEL);
+ char *buf = (char *)addr;
+ size_t buf_size = min_t(size_t, count, PAGE_SIZE - 1);
+ int ret, arg_num;
+ struct mwifiex_ds_hs_cfg hscfg;
+ int conditions = HS_CFG_COND_DEF;
+ u32 gpio = HS_CFG_GPIO_DEF, gap = HS_CFG_GAP_DEF;
+
+ if (!buf)
+ return -ENOMEM;
+
+ if (copy_from_user(buf, ubuf, buf_size)) {
+ ret = -EFAULT;
+ goto done;
+ }
+
+ arg_num = sscanf(buf, "%d %x %x", &conditions, &gpio, &gap);
+
+ memset(&hscfg, 0, sizeof(struct mwifiex_ds_hs_cfg));
+
+ if (arg_num > 3) {
+ dev_err(priv->adapter->dev, "Too many arguments\n");
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (arg_num >= 1 && arg_num < 3)
+ mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET,
+ MWIFIEX_SYNC_CMD, &hscfg);
+
+ if (arg_num) {
+ if (conditions == HS_CFG_CANCEL) {
+ mwifiex_cancel_hs(priv, MWIFIEX_ASYNC_CMD);
+ ret = count;
+ goto done;
+ }
+ hscfg.conditions = conditions;
+ }
+ if (arg_num >= 2)
+ hscfg.gpio = gpio;
+ if (arg_num == 3)
+ hscfg.gap = gap;
+
+ hscfg.is_invoke_hostcmd = false;
+ mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_SET,
+ MWIFIEX_SYNC_CMD, &hscfg);
+
+ mwifiex_enable_hs(priv->adapter);
+ priv->adapter->hs_enabling = false;
+ ret = count;
+done:
+ free_page(addr);
+ return ret;
+}
+
+/* Proc hscfg file read handler
+ * This function can be used to read host sleep configuration
+ * parameters from driver.
+ */
+static ssize_t
+mwifiex_hscfg_read(struct file *file, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct mwifiex_private *priv = (void *)file->private_data;
+ unsigned long addr = get_zeroed_page(GFP_KERNEL);
+ char *buf = (char *)addr;
+ int pos, ret;
+ struct mwifiex_ds_hs_cfg hscfg;
+
+ if (!buf)
+ return -ENOMEM;
+
+ mwifiex_set_hs_params(priv, HostCmd_ACT_GEN_GET,
+ MWIFIEX_SYNC_CMD, &hscfg);
+
+ pos = snprintf(buf, PAGE_SIZE, "%u 0x%x 0x%x\n", hscfg.conditions,
+ hscfg.gpio, hscfg.gap);
+
+ ret = simple_read_from_buffer(ubuf, count, ppos, buf, pos);
+
+ free_page(addr);
+ return ret;
+}
#define MWIFIEX_DFS_ADD_FILE(name) do { \
if (!debugfs_create_file(#name, 0644, priv->dfs_dev_dir, \
@@ -725,6 +816,7 @@ MWIFIEX_DFS_FILE_READ_OPS(getlog);
MWIFIEX_DFS_FILE_READ_OPS(fw_dump);
MWIFIEX_DFS_FILE_OPS(regrdwr);
MWIFIEX_DFS_FILE_OPS(rdeeprom);
+MWIFIEX_DFS_FILE_OPS(hscfg);
/*
* This function creates the debug FS directory structure and the files.
@@ -747,6 +839,7 @@ mwifiex_dev_debugfs_init(struct mwifiex_private *priv)
MWIFIEX_DFS_ADD_FILE(regrdwr);
MWIFIEX_DFS_ADD_FILE(rdeeprom);
MWIFIEX_DFS_ADD_FILE(fw_dump);
+ MWIFIEX_DFS_ADD_FILE(hscfg);
}
/*
@@ -920,6 +920,8 @@ int mwifiex_ret_enh_power_mode(struct mwifiex_private *priv,
void mwifiex_process_hs_config(struct mwifiex_adapter *adapter);
void mwifiex_hs_activated_event(struct mwifiex_private *priv,
u8 activated);
+int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
+ int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg);
int mwifiex_ret_802_11_hs_cfg(struct mwifiex_private *priv,
struct host_cmd_ds_command *resp);
int mwifiex_process_rx_packet(struct mwifiex_private *priv,
@@ -389,8 +389,8 @@ done:
* This function prepares the correct firmware command and
* issues it.
*/
-static int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
- int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg)
+int mwifiex_set_hs_params(struct mwifiex_private *priv, u16 action,
+ int cmd_type, struct mwifiex_ds_hs_cfg *hs_cfg)
{
struct mwifiex_adapter *adapter = priv->adapter;