@@ -162,7 +162,7 @@ int wil_cid_fill_sinfo(struct wil6210_priv *wil, int cid,
sinfo->tx_packets = stats->tx_packets;
sinfo->tx_failed = stats->tx_errors;
- if (test_bit(wil_status_fwconnected, &wil->status)) {
+ if (test_bit(wil_status_fwconnected, wil->status)) {
sinfo->filled |= STATION_INFO_SIGNAL;
sinfo->signal = reply.evt.sqi;
}
@@ -282,7 +282,7 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
}
/* FW don't support scan after connection attempt */
- if (test_bit(wil_status_dontscan, &wil->status)) {
+ if (test_bit(wil_status_dontscan, wil->status)) {
wil_err(wil, "Can't scan now\n");
return -EBUSY;
}
@@ -362,8 +362,8 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
int ch;
int rc = 0;
- if (test_bit(wil_status_fwconnecting, &wil->status) ||
- test_bit(wil_status_fwconnected, &wil->status))
+ if (test_bit(wil_status_fwconnecting, wil->status) ||
+ test_bit(wil_status_fwconnected, wil->status))
return -EALREADY;
wil_print_connect_params(wil, sme);
@@ -450,7 +450,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
memcpy(conn.bssid, bss->bssid, ETH_ALEN);
memcpy(conn.dst_mac, bss->bssid, ETH_ALEN);
- set_bit(wil_status_fwconnecting, &wil->status);
+ set_bit(wil_status_fwconnecting, wil->status);
rc = wmi_send(wil, WMI_CONNECT_CMDID, &conn, sizeof(conn));
if (rc == 0) {
@@ -458,7 +458,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy,
mod_timer(&wil->connect_timer,
jiffies + msecs_to_jiffies(2000));
} else {
- clear_bit(wil_status_fwconnecting, &wil->status);
+ clear_bit(wil_status_fwconnecting, wil->status);
}
out:
@@ -1313,7 +1313,7 @@ static void wil6210_debugfs_init_isr(struct wil6210_priv *wil,
/* fields in struct wil6210_priv */
static const struct dbg_off dbg_wil_off[] = {
WIL_FIELD(secure_pcp, S_IRUGO | S_IWUSR, doff_u32),
- WIL_FIELD(status, S_IRUGO | S_IWUSR, doff_ulong),
+ WIL_FIELD(status[0], S_IRUGO | S_IWUSR, doff_ulong),
WIL_FIELD(fw_version, S_IRUGO, doff_u32),
WIL_FIELD(hw_version, S_IRUGO, doff_x32),
WIL_FIELD(recovery_count, S_IRUGO, doff_u32),
@@ -102,7 +102,7 @@ static void wil6210_mask_irq_pseudo(struct wil6210_priv *wil)
iowrite32(WIL6210_IRQ_DISABLE, wil->csr +
HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
- clear_bit(wil_status_irqen, &wil->status);
+ clear_bit(wil_status_irqen, wil->status);
}
void wil6210_unmask_irq_tx(struct wil6210_priv *wil)
@@ -130,7 +130,7 @@ static void wil6210_unmask_irq_pseudo(struct wil6210_priv *wil)
{
wil_dbg_irq(wil, "%s()\n", __func__);
- set_bit(wil_status_irqen, &wil->status);
+ set_bit(wil_status_irqen, wil->status);
iowrite32(WIL6210_IRQ_PSEUDO_MASK, wil->csr +
HOSTADDR(RGF_DMA_PSEUDO_CAUSE_MASK_SW));
@@ -198,8 +198,8 @@ static irqreturn_t wil6210_irq_rx(int irq, void *cookie)
"of overflow\" interrupt\n");
isr &= ~(BIT_DMA_EP_RX_ICR_RX_DONE | BIT_DMA_EP_RX_ICR_RX_HTRSH);
- if (test_bit(wil_status_reset_done, &wil->status)) {
- if (test_bit(wil_status_napi_en, &wil->status)) {
+ if (test_bit(wil_status_reset_done, wil->status)) {
+ if (test_bit(wil_status_napi_en, wil->status)) {
wil_dbg_txrx(wil, "NAPI(Rx) schedule\n");
need_unmask = false;
napi_schedule(&wil->napi_rx);
@@ -248,7 +248,7 @@ static irqreturn_t wil6210_irq_tx(int irq, void *cookie)
isr &= ~BIT_DMA_EP_TX_ICR_TX_DONE;
/* clear also all VRING interrupts */
isr &= ~(BIT(25) - 1UL);
- if (test_bit(wil_status_reset_done, &wil->status)) {
+ if (test_bit(wil_status_reset_done, wil->status)) {
wil_dbg_txrx(wil, "NAPI(Tx) schedule\n");
need_unmask = false;
napi_schedule(&wil->napi_tx);
@@ -310,7 +310,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
if (isr & ISR_MISC_FW_ERROR) {
wil_err(wil, "Firmware error detected\n");
- clear_bit(wil_status_fwready, &wil->status);
+ clear_bit(wil_status_fwready, wil->status);
/*
* do not clear @isr here - we do 2-nd part in thread
* there, user space get notified, and it should be done
@@ -321,7 +321,7 @@ static irqreturn_t wil6210_irq_misc(int irq, void *cookie)
if (isr & ISR_MISC_FW_READY) {
wil_dbg_irq(wil, "IRQ: FW ready\n");
wil_cache_mbox_regs(wil);
- set_bit(wil_status_reset_done, &wil->status);
+ set_bit(wil_status_reset_done, wil->status);
/**
* Actual FW ready indicated by the
* WMI_FW_READY_EVENTID
@@ -394,7 +394,7 @@ static irqreturn_t wil6210_thread_irq(int irq, void *cookie)
*/
static int wil6210_debug_irq_mask(struct wil6210_priv *wil, u32 pseudo_cause)
{
- if (!test_bit(wil_status_irqen, &wil->status)) {
+ if (!test_bit(wil_status_irqen, wil->status)) {
u32 icm_rx = wil_ioread32_and_clear(wil->csr +
HOSTADDR(RGF_DMA_EP_RX_ICR) +
offsetof(struct RGF_ICR, ICM));
@@ -217,16 +217,16 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
wil_link_off(wil);
- if (test_bit(wil_status_fwconnected, &wil->status)) {
- clear_bit(wil_status_fwconnected, &wil->status);
+ if (test_bit(wil_status_fwconnected, wil->status)) {
+ clear_bit(wil_status_fwconnected, wil->status);
cfg80211_disconnected(ndev, reason_code,
NULL, 0, GFP_KERNEL);
- } else if (test_bit(wil_status_fwconnecting, &wil->status)) {
+ } else if (test_bit(wil_status_fwconnecting, wil->status)) {
cfg80211_connect_result(ndev, bssid, NULL, 0, NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
GFP_KERNEL);
}
- clear_bit(wil_status_fwconnecting, &wil->status);
+ clear_bit(wil_status_fwconnecting, wil->status);
break;
default:
break;
@@ -259,7 +259,7 @@ static void wil_scan_timer_fn(ulong x)
{
struct wil6210_priv *wil = (void *)x;
- clear_bit(wil_status_fwready, &wil->status);
+ clear_bit(wil_status_fwready, wil->status);
wil_err(wil, "Scan timeout detected, start fw error recovery\n");
wil->recovery_state = fw_recovery_pending;
schedule_work(&wil->fw_error_worker);
@@ -654,12 +654,13 @@ int wil_reset(struct wil6210_priv *wil)
wil_dbg_misc(wil, "%s()\n", __func__);
WARN_ON(!mutex_is_locked(&wil->mutex));
- WARN_ON(test_bit(wil_status_napi_en, &wil->status));
+ WARN_ON(test_bit(wil_status_napi_en, wil->status));
cancel_work_sync(&wil->disconnect_worker);
wil6210_disconnect(wil, NULL, WLAN_REASON_DEAUTH_LEAVING, false);
- wil->status = 0; /* prevent NAPI from being scheduled */
+ /* prevent NAPI from being scheduled */
+ bitmap_zero(wil->status, wil_status_last);
if (wil->scan_request) {
wil_dbg_misc(wil, "Abort scan_request 0x%p\n",
@@ -798,7 +799,7 @@ int __wil_up(struct wil6210_priv *wil)
wil_dbg_misc(wil, "NAPI enable\n");
napi_enable(&wil->napi_rx);
napi_enable(&wil->napi_tx);
- set_bit(wil_status_napi_en, &wil->status);
+ set_bit(wil_status_napi_en, wil->status);
if (wil->platform_ops.bus_request)
wil->platform_ops.bus_request(wil->platform_handle,
@@ -831,7 +832,7 @@ int __wil_down(struct wil6210_priv *wil)
wil->platform_ops.bus_request(wil->platform_handle, 0);
wil_disable_irq(wil);
- if (test_and_clear_bit(wil_status_napi_en, &wil->status)) {
+ if (test_and_clear_bit(wil_status_napi_en, wil->status)) {
napi_disable(&wil->napi_rx);
napi_disable(&wil->napi_tx);
wil_dbg_misc(wil, "NAPI disable\n");
@@ -846,15 +847,15 @@ int __wil_down(struct wil6210_priv *wil)
wil->scan_request = NULL;
}
- if (test_bit(wil_status_fwconnected, &wil->status) ||
- test_bit(wil_status_fwconnecting, &wil->status))
+ if (test_bit(wil_status_fwconnected, wil->status) ||
+ test_bit(wil_status_fwconnecting, wil->status))
wmi_send(wil, WMI_DISCONNECT_CMDID, NULL, 0);
/* make sure wil is idle (not connected) */
mutex_unlock(&wil->mutex);
while (iter--) {
- int idle = !test_bit(wil_status_fwconnected, &wil->status) &&
- !test_bit(wil_status_fwconnecting, &wil->status);
+ int idle = !test_bit(wil_status_fwconnected, wil->status) &&
+ !test_bit(wil_status_fwconnecting, wil->status);
if (idle)
break;
msleep(WAIT_FOR_DISCONNECT_INTERVAL_MS);
@@ -726,7 +726,7 @@ void wil_vring_fini_tx(struct wil6210_priv *wil, int id)
/* make sure NAPI won't touch this vring */
wil->vring_tx_data[id].enabled = 0;
- if (test_bit(wil_status_napi_en, &wil->status))
+ if (test_bit(wil_status_napi_en, wil->status))
napi_synchronize(&wil->napi_tx);
wil_vring_free(wil, vring, 1);
@@ -1038,14 +1038,14 @@ netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev)
int rc;
wil_dbg_txrx(wil, "%s()\n", __func__);
- if (!test_bit(wil_status_fwready, &wil->status)) {
+ if (!test_bit(wil_status_fwready, wil->status)) {
if (!pr_once_fw) {
wil_err(wil, "FW not ready\n");
pr_once_fw = true;
}
goto drop;
}
- if (!test_bit(wil_status_fwconnected, &wil->status)) {
+ if (!test_bit(wil_status_fwconnected, wil->status)) {
wil_err(wil, "FW not connected\n");
goto drop;
}
@@ -341,6 +341,7 @@ enum { /* for wil6210_priv.status */
wil_status_reset_done,
wil_status_irqen, /* FIXME: interrupts enabled - for debug */
wil_status_napi_en, /* NAPI enabled protected by wil->mutex */
+ wil_status_last /* keep last */
};
struct pci_dev;
@@ -448,7 +449,7 @@ struct wil6210_priv {
int n_msi;
struct wireless_dev *wdev;
void __iomem *csr;
- ulong status;
+ DECLARE_BITMAP(status, wil_status_last);
u32 fw_version;
u32 hw_version;
struct wil_board *board;
@@ -202,7 +202,7 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len)
might_sleep();
- if (!test_bit(wil_status_fwready, &wil->status)) {
+ if (!test_bit(wil_status_fwready, wil->status)) {
wil_err(wil, "WMI: cannot send command while FW not ready\n");
return -EAGAIN;
}
@@ -305,7 +305,7 @@ static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d,
wil_dbg_wmi(wil, "WMI: got FW ready event\n");
wil_set_recovery_state(wil, fw_recovery_idle);
- set_bit(wil_status_fwready, &wil->status);
+ set_bit(wil_status_fwready, wil->status);
/* let the reset sequence continue */
complete(&wil->wmi_ready);
}
@@ -443,7 +443,7 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
if ((wdev->iftype == NL80211_IFTYPE_STATION) ||
(wdev->iftype == NL80211_IFTYPE_P2P_CLIENT)) {
- if (!test_bit(wil_status_fwconnecting, &wil->status)) {
+ if (!test_bit(wil_status_fwconnecting, wil->status)) {
wil_err(wil, "Not in connecting state\n");
return;
}
@@ -467,8 +467,8 @@ static void wmi_evt_connect(struct wil6210_priv *wil, int id, void *d, int len)
cfg80211_new_sta(ndev, evt->bssid, &sinfo, GFP_KERNEL);
}
- clear_bit(wil_status_fwconnecting, &wil->status);
- set_bit(wil_status_fwconnected, &wil->status);
+ clear_bit(wil_status_fwconnecting, wil->status);
+ set_bit(wil_status_fwconnected, wil->status);
/* FIXME FW can transmit only ucast frames to peer */
/* FIXME real ring_id instead of hard coded 0 */
@@ -726,7 +726,7 @@ void wmi_recv_cmd(struct wil6210_priv *wil)
ulong flags;
unsigned n;
- if (!test_bit(wil_status_reset_done, &wil->status)) {
+ if (!test_bit(wil_status_reset_done, wil->status)) {
wil_err(wil, "Reset in progress. Cannot handle WMI event\n");
return;
}
wil->status used as bitmap; use DECLARE_BITMAP for it. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> --- drivers/net/wireless/ath/wil6210/cfg80211.c | 12 ++++++------ drivers/net/wireless/ath/wil6210/debugfs.c | 2 +- drivers/net/wireless/ath/wil6210/interrupt.c | 16 ++++++++-------- drivers/net/wireless/ath/wil6210/main.c | 27 ++++++++++++++------------- drivers/net/wireless/ath/wil6210/txrx.c | 6 +++--- drivers/net/wireless/ath/wil6210/wil6210.h | 3 ++- drivers/net/wireless/ath/wil6210/wmi.c | 12 ++++++------ 7 files changed, 40 insertions(+), 38 deletions(-)