| Message ID | 1419834066-11802-1-git-send-email-sujith@msujith.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
Sujith Manoharan <sujith@msujith.org> writes: > From: Sujith Manoharan <c_manoha@qca.qualcomm.com> > > A value of zero indicates that 128B is the maximum > DMA request size for read/writes. But PCI cards based > on AR9880 can support 256B, so enable this for > the 10.2 firmware. > > Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Did you see any throughput improvements with this?
On 29 December 2014 at 07:21, Sujith Manoharan <sujith@msujith.org> wrote: > From: Sujith Manoharan <c_manoha@qca.qualcomm.com> > > A value of zero indicates that 128B is the maximum > DMA request size for read/writes. But PCI cards based > on AR9880 can support 256B, so enable this for > the 10.2 firmware. Since it's for cards/chips why do you enable it for 10.2 only? There's 10.1, main and tlv as well which could possibly benefit from this. Micha? -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Michal Kazior wrote: > Since it's for cards/chips why do you enable it for 10.2 only? There's > 10.1, main and tlv as well which could possibly benefit from this. I've not tested it with any of the FW versions other than 10.2 and am not sure if older FW support this properly. We could try it with 10.1, I guess - but even that is in 'maintenance mode' internally. Sujith -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Sujith Manoharan <sujith@msujith.org> writes: > Michal Kazior wrote: >> Since it's for cards/chips why do you enable it for 10.2 only? There's >> 10.1, main and tlv as well which could possibly benefit from this. > > I've not tested it with any of the FW versions other than 10.2 and > am not sure if older FW support this properly. We could try it > with 10.1, I guess - but even that is in 'maintenance mode' > internally. Yeah, I don't see much point of trying to improve our 10.1 support as all the new development happens on 10.2 branch. Most important is that we don't break 10.1 support ("no regressions" rule), but it in no way does 10.1 need to be in feature parity with 10.2.
Sujith Manoharan <sujith@msujith.org> writes: > From: Sujith Manoharan <c_manoha@qca.qualcomm.com> > > A value of zero indicates that 128B is the maximum > DMA request size for read/writes. But PCI cards based > on AR9880 can support 256B, so enable this for > the 10.2 firmware. > > Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Thanks, applied.
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 5729901..7b771ae 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -183,6 +183,9 @@ struct ath10k_pktlog_hdr { #define TARGET_10X_NUM_MSDU_DESC (1024 + 400) #define TARGET_10X_MAX_FRAG_ENTRIES 0 +/* 10.2 parameters */ +#define TARGET_10_2_DMA_BURST_SIZE 1 + /* Target specific defines for WMI-TLV firmware */ #define TARGET_TLV_NUM_VDEVS 3 #define TARGET_TLV_NUM_STATIONS 32 diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index ac74290..b103122 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -3744,7 +3744,7 @@ static struct sk_buff *ath10k_wmi_10_2_op_gen_init(struct ath10k *ar) config.mcast2ucast_mode = __cpu_to_le32(TARGET_10X_MCAST2UCAST_MODE); config.tx_dbg_log_size = __cpu_to_le32(TARGET_10X_TX_DBG_LOG_SIZE); config.num_wds_entries = __cpu_to_le32(TARGET_10X_NUM_WDS_ENTRIES); - config.dma_burst_size = __cpu_to_le32(TARGET_10X_DMA_BURST_SIZE); + config.dma_burst_size = __cpu_to_le32(TARGET_10_2_DMA_BURST_SIZE); config.mac_aggr_delim = __cpu_to_le32(TARGET_10X_MAC_AGGR_DELIM); val = TARGET_10X_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK;