@@ -42,6 +42,7 @@
#define DM_DIG_MAX 0x3e
#define DM_DIG_MIN 0x1e
+#define DM_DIG_MAX_AP 0x32
#define DM_DIG_BACKOFF_MAX 12
#define DM_DIG_BACKOFF_MIN -4
#define DM_DIG_BACKOFF_DEFAULT 10
@@ -186,9 +186,6 @@
#define BW_AUTO_SWITCH_HIGH_LOW 25
#define BW_AUTO_SWITCH_LOW_HIGH 30
-#define DM_DIG_MAX_AP 0x32
-#define DM_DIG_MIN_AP 0x20
-
#define DM_DIG_FA_UPPER 0x3e
#define DM_DIG_FA_LOWER 0x1e
#define DM_DIG_FA_TH0 0x200
@@ -189,9 +189,6 @@
#define BW_AUTO_SWITCH_HIGH_LOW 25
#define BW_AUTO_SWITCH_LOW_HIGH 30
-#define DM_DIG_MAX_AP 0x32
-#define DM_DIG_MIN_AP 0x20
-
#define DM_DIG_FA_UPPER 0x3e
#define DM_DIG_FA_LOWER 0x1e
#define DM_DIG_FA_TH0 0x200
@@ -470,7 +470,7 @@ static void _rtl92s_dm_initial_gain_sta_beforeconnect(struct ieee80211_hw *hw)
if (digtable->backoff_enable_flag)
rtl92s_backoff_enable_flag(hw);
else
- digtable->back_val = DM_DIG_BACKOFF;
+ digtable->back_val = DM_DIG_BACKOFF_MAX;
if ((digtable->rssi_val + 10 - digtable->back_val) >
digtable->rx_gain_max)
@@ -504,7 +504,7 @@ static void _rtl92s_dm_initial_gain_sta_beforeconnect(struct ieee80211_hw *hw)
digtable->dig_ext_port_stage = DIG_EXT_PORT_STAGE_MAX;
rtl92s_phy_set_fw_cmd(hw, FW_CMD_DIG_ENABLE);
- digtable->back_val = DM_DIG_BACKOFF;
+ digtable->back_val = DM_DIG_BACKOFF_MAX;
digtable->cur_igvalue = rtlpriv->phy.default_initialgain[0];
digtable->pre_igvalue = 0;
return;
@@ -692,7 +692,7 @@ static void _rtl92s_dm_init_dig(struct ieee80211_hw *hw)
/* for dig debug rssi value */
digtable->rssi_val = 50;
- digtable->back_val = DM_DIG_BACKOFF;
+ digtable->back_val = DM_DIG_BACKOFF_MAX;
digtable->rx_gain_max = DM_DIG_MAX;
digtable->rx_gain_min = DM_DIG_MIN;
@@ -83,7 +83,6 @@ enum dm_ratr_sta {
#define DM_DIG_HIGH_PWR_THRESH_HIGH 75
#define DM_DIG_HIGH_PWR_THRESH_LOW 70
-#define DM_DIG_BACKOFF 12
#define DM_DIG_MIN_Netcore 0x12
void rtl92s_dm_watchdog(struct ieee80211_hw *hw);
@@ -180,9 +180,6 @@
#define BW_AUTO_SWITCH_HIGH_LOW 25
#define BW_AUTO_SWITCH_LOW_HIGH 30
-#define DM_DIG_MAX_AP 0x32
-#define DM_DIG_MIN_AP 0x20
-
#define DM_DIG_FA_UPPER 0x3e
#define DM_DIG_FA_LOWER 0x1e
#define DM_DIG_FA_TH0 0x200
@@ -187,15 +187,6 @@
#define BW_AUTO_SWITCH_HIGH_LOW 25
#define BW_AUTO_SWITCH_LOW_HIGH 30
-#define DM_FALSEALARM_THRESH_LOW 400
-#define DM_FALSEALARM_THRESH_HIGH 1000
-
-#define DM_DIG_MAX 0x3e
-#define DM_DIG_MIN 0x1e
-
-#define DM_DIG_MAX_AP 0x32
-#define DM_DIG_MIN_AP 0x20
-
#define DM_DIG_FA_UPPER 0x3e
#define DM_DIG_FA_LOWER 0x1e
#define DM_DIG_FA_TH0 200
Several of the drivers still were defining their own copies of various macros. These are all moved into the core. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> --- V2 - unchanged from V1 --- drivers/net/wireless/rtlwifi/core.h | 1 + drivers/net/wireless/rtlwifi/rtl8188ee/dm.h | 3 --- drivers/net/wireless/rtlwifi/rtl8192ee/dm.h | 3 --- drivers/net/wireless/rtlwifi/rtl8192se/dm.c | 6 +++--- drivers/net/wireless/rtlwifi/rtl8192se/dm.h | 1 - drivers/net/wireless/rtlwifi/rtl8723be/dm.h | 3 --- drivers/net/wireless/rtlwifi/rtl8821ae/dm.h | 9 --------- 7 files changed, 4 insertions(+), 22 deletions(-)