@@ -967,6 +967,143 @@ static int ath10k_vdev_stop(struct ath10k_vif *arvif)
return ret;
}
+static int ath10k_mac_setup_bcn_p2p_ie(struct ath10k_vif *arvif,
+ struct sk_buff *bcn)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_mgmt *mgmt;
+ const u8 *p2p_ie;
+ int ret;
+
+ if (arvif->vdev_type != WMI_VDEV_TYPE_AP)
+ return 0;
+
+ if (arvif->vdev_subtype != WMI_VDEV_SUBTYPE_P2P_GO)
+ return 0;
+
+ mgmt = (void *)bcn->data;
+ p2p_ie = cfg80211_find_vendor_ie(WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+ mgmt->u.beacon.variable,
+ bcn->len - (mgmt->u.beacon.variable -
+ bcn->data));
+ if (!p2p_ie)
+ return -ENOENT;
+
+ ret = ath10k_wmi_p2p_go_bcn_ie(ar, arvif->vdev_id, p2p_ie);
+ if (ret) {
+ ath10k_warn(ar, "failed to submit p2p go bcn ie for vdev %i: %d\n",
+ arvif->vdev_id, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_remove_vendor_ie(struct sk_buff *skb, unsigned int oui,
+ u8 oui_type, size_t ie_offset)
+{
+ size_t len;
+ const u8 *next;
+ const u8 *end;
+ u8 *ie;
+
+ if (WARN_ON(skb->len < ie_offset))
+ return -EINVAL;
+
+ ie = (u8 *)cfg80211_find_vendor_ie(oui, oui_type,
+ skb->data + ie_offset,
+ skb->len - ie_offset);
+ if (!ie)
+ return -ENOENT;
+
+ len = ie[1] + 2;
+ end = skb->data + skb->len;
+ next = ie + len;
+
+ if (WARN_ON(next > end))
+ return -EINVAL;
+
+ memmove(ie, next, end - next);
+ skb_trim(skb, skb->len - len);
+
+ return 0;
+}
+
+static int ath10k_mac_setup_bcn_tmpl(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_hw *hw = ar->hw;
+ struct ieee80211_vif *vif = arvif->vif;
+ struct ieee80211_mutable_offsets offs = {};
+ struct sk_buff *bcn;
+ int ret;
+
+ if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+ return 0;
+
+ bcn = ieee80211_beacon_get_template(hw, vif, &offs);
+ if (!bcn) {
+ ath10k_warn(ar, "failed to get beacon template from mac80211\n");
+ return -EPERM;
+ }
+
+ ret = ath10k_mac_setup_bcn_p2p_ie(arvif, bcn);
+ if (ret) {
+ ath10k_warn(ar, "failed to setup p2p go bcn ie: %d\n", ret);
+ kfree_skb(bcn);
+ return ret;
+ }
+
+ /* P2P IE is inserted by firmware automatically (as configured above)
+ * so remove it from the base beacon template to avoid duplicate P2P
+ * IEs in beacon frames.
+ */
+ ath10k_mac_remove_vendor_ie(bcn, WLAN_OUI_WFA, WLAN_OUI_TYPE_WFA_P2P,
+ offsetof(struct ieee80211_mgmt,
+ u.beacon.variable));
+
+ ret = ath10k_wmi_bcn_tmpl(ar, arvif->vdev_id, offs.tim_offset, bcn, 0,
+ 0, NULL, 0);
+ kfree_skb(bcn);
+
+ if (ret) {
+ ath10k_warn(ar, "failed to submit beacon template command: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)
+{
+ struct ath10k *ar = arvif->ar;
+ struct ieee80211_hw *hw = ar->hw;
+ struct ieee80211_vif *vif = arvif->vif;
+ struct sk_buff *prb;
+ int ret;
+
+ if (!test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map))
+ return 0;
+
+ prb = ieee80211_proberesp_get(hw, vif);
+ if (!prb) {
+ ath10k_warn(ar, "failed to get probe resp template from mac80211\n");
+ return -EPERM;
+ }
+
+ ret = ath10k_wmi_prb_tmpl(ar, arvif->vdev_id, prb);
+ kfree_skb(prb);
+
+ if (ret) {
+ ath10k_warn(ar, "failed to submit probe resp template command: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static void ath10k_control_beaconing(struct ath10k_vif *arvif,
struct ieee80211_bss_conf *info)
{
@@ -3283,6 +3420,18 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw,
if (ret)
ath10k_warn(ar, "failed to set beacon mode for vdev %d: %i\n",
arvif->vdev_id, ret);
+
+ ret = ath10k_mac_setup_bcn_tmpl(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to update beacon template: %d\n",
+ ret);
+ }
+
+ if (changed & BSS_CHANGED_AP_PROBE_RESP) {
+ ret = ath10k_mac_setup_prb_tmpl(arvif);
+ if (ret)
+ ath10k_warn(ar, "failed to setup probe resp template on vdev %i: %d\n",
+ arvif->vdev_id, ret);
}
if (changed & BSS_CHANGED_BEACON_INFO) {
@@ -5127,6 +5276,19 @@ int ath10k_mac_register(struct ath10k *ar)
ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
+ if (test_bit(WMI_SERVICE_BEACON_OFFLOAD, ar->wmi.svc_map)) {
+ ar->hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
+
+ /* Firmware delivers WPS/P2P Probe Requests frames to driver so
+ * that userspace (e.g. wpa_supplicant/hostapd) can generate
+ * correct Probe Responses. This is more of a hack advert..
+ */
+ ar->hw->wiphy->probe_resp_offload |=
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_WPS2 |
+ NL80211_PROBE_RESP_OFFLOAD_SUPPORT_P2P;
+ }
+
ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
ar->hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
ar->hw->wiphy->max_remain_on_channel_duration = 5000;
New firmware revisions support beacon and probe response templates instead. This means SWBA events are no longer delivered for these firmware revisions. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> --- Notes: v2: * add a comment why P2P IE is stripped from beacon template [Kalle] drivers/net/wireless/ath/ath10k/mac.c | 162 ++++++++++++++++++++++++++++++++++ 1 file changed, 162 insertions(+)