diff mbox

[06/10] wil6210: interrupt moderation configuration update

Message ID 1422175971-8075-7-git-send-email-qca_vkondrat@qca.qualcomm.com (mailing list archive)
State Accepted
Delegated to: Kalle Valo
Headers show

Commit Message

Vladimir Kondratiev Jan. 25, 2015, 8:52 a.m. UTC 
From: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>

Due to HW limitation, inter-packet gap timeout max value is 13 usec.
Update of current thresholds from 15 to 13 usec.

Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com>
Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/wil6210.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 2521ba1..3575b5d 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -78,8 +78,8 @@  static inline u32 wil_mtu2macbuf(u32 mtu)
 #define WIL_MAX_ETH_MTU		(IEEE80211_MAX_DATA_LEN_DMG - 8)
 /* Max supported by wil6210 value for interrupt threshold is 5sec. */
 #define WIL6210_ITR_TRSH_MAX (5000000)
-#define WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT (15) /* usec */
-#define WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT (15) /* usec */
+#define WIL6210_ITR_TX_INTERFRAME_TIMEOUT_DEFAULT (13) /* usec */
+#define WIL6210_ITR_RX_INTERFRAME_TIMEOUT_DEFAULT (13) /* usec */
 #define WIL6210_ITR_TX_MAX_BURST_DURATION_DEFAULT (500) /* usec */
 #define WIL6210_ITR_RX_MAX_BURST_DURATION_DEFAULT (500) /* usec */
 #define WIL6210_FW_RECOVERY_RETRIES	(5) /* try to recover this many times */