@@ -104,6 +104,9 @@ u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
void bcma_core_pci_up(struct bcma_drv_pci *pc);
void bcma_core_pci_down(struct bcma_drv_pci *pc);
+/* driver_pcie2.c */
+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2);
+
extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
@@ -156,14 +156,20 @@ static void pciedev_reg_pm_clk_period(struct bcma_drv_pcie2 *pcie2)
void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
{
- struct bcma_chipinfo *ci = &pcie2->core->bus->chipinfo;
+ struct bcma_bus *bus = pcie2->core->bus;
+ struct bcma_chipinfo *ci = &bus->chipinfo;
u32 tmp;
tmp = pcie2_read32(pcie2, BCMA_CORE_PCIE2_SPROM(54));
if ((tmp & 0xe) >> 1 == 2)
bcma_core_pcie2_cfg_write(pcie2, 0x4e0, 0x17);
- /* TODO: Do we need pcie_reqsize? */
+ switch (bus->chipinfo.id) {
+ case BCMA_CHIP_ID_BCM4360:
+ case BCMA_CHIP_ID_BCM4352:
+ pcie2->reqsize = 0x3000; /* TODO: PCI_EXP_DEVCTL_READRQ_1024B */
+ break;
+ }
if (ci->id == BCMA_CHIP_ID_BCM4360 && ci->rev > 3)
bcma_core_pcie2_war_delay_perst_enab(pcie2, true);
@@ -173,3 +179,15 @@ void bcma_core_pcie2_init(struct bcma_drv_pcie2 *pcie2)
pciedev_crwlpciegen2_180(pcie2);
pciedev_crwlpciegen2_182(pcie2);
}
+
+/**************************************************
+ * Runtime ops.
+ **************************************************/
+
+void bcma_core_pcie2_up(struct bcma_drv_pcie2 *pcie2)
+{
+ struct bcma_bus *bus = pcie2->core->bus;
+ struct pci_dev *dev = bus->host_pci;
+
+ pcie_set_readrq(dev, pcie2->reqsize);
+}
@@ -322,7 +322,7 @@ void bcma_host_pci_up(struct bcma_bus *bus)
return;
if (bus->host_is_pcie2)
- pr_warn("Bringing up bus with PCIe Gen 2 host is unsupported yet\n");
+ bcma_core_pcie2_up(&bus->drv_pcie2);
else
bcma_core_pci_up(&bus->drv_pci[0]);
}
@@ -143,6 +143,8 @@
struct bcma_drv_pcie2 {
struct bcma_device *core;
+
+ u16 reqsize;
};
#define pcie2_read16(pcie2, offset) bcma_read16((pcie2)->core, offset)
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com> --- V2: Use pcie_set_readrq helper instead of pcie_capability_clear_and_set_word --- drivers/bcma/bcma_private.h | 3 +++ drivers/bcma/driver_pcie2.c | 22 ++++++++++++++++++++-- drivers/bcma/host_pci.c | 2 +- include/linux/bcma/bcma_driver_pcie2.h | 2 ++ 4 files changed, 26 insertions(+), 3 deletions(-)