diff mbox

[5/9] ath10k: use hw rate definitions for fixed rate

Message ID 1426859655-11797-6-git-send-email-michal.kazior@tieto.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Michal Kazior March 20, 2015, 1:54 p.m. UTC 
Using raw values is discouraged. Having
defines/enums is preferred.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index f4e76e7..72fbdc2 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4972,20 +4972,18 @@  exit:
 
 /* Helper table for legacy fixed_rate/bitrate_mask */
 static const u8 cck_ofdm_rate[] = {
-	/* CCK */
-	3, /* 1Mbps */
-	2, /* 2Mbps */
-	1, /* 5.5Mbps */
-	0, /* 11Mbps */
-	/* OFDM */
-	3, /* 6Mbps */
-	7, /* 9Mbps */
-	2, /* 12Mbps */
-	6, /* 18Mbps */
-	1, /* 24Mbps */
-	5, /* 36Mbps */
-	0, /* 48Mbps */
-	4, /* 54Mbps */
+	ATH10K_HW_RATE_CCK_LP_1M,
+	ATH10K_HW_RATE_CCK_LP_2M,
+	ATH10K_HW_RATE_CCK_LP_5_5M,
+	ATH10K_HW_RATE_CCK_LP_11M,
+	ATH10K_HW_RATE_OFDM_6M,
+	ATH10K_HW_RATE_OFDM_9M,
+	ATH10K_HW_RATE_OFDM_12M,
+	ATH10K_HW_RATE_OFDM_18M,
+	ATH10K_HW_RATE_OFDM_24M,
+	ATH10K_HW_RATE_OFDM_36M,
+	ATH10K_HW_RATE_OFDM_48M,
+	ATH10K_HW_RATE_OFDM_54M,
 };
 
 /* Check if only one bit set */