@@ -1609,7 +1609,6 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
- struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw));
enum wireless_mode wirelessmode = mac->mode;
u8 idx = 0;
@@ -1818,63 +1817,10 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
u4b_ac_param);
break;
default:
- RT_ASSERT(false,
- "SetHwReg8185(): invalid aci: %d !\n",
+ RT_ASSERT(false, "invalid aci: %d !\n",
e_aci);
break;
}
- if (rtlusb->acm_method != EACMWAY2_SW)
- rtlpriv->cfg->ops->set_hw_reg(hw,
- HW_VAR_ACM_CTRL, &e_aci);
- break;
- }
- case HW_VAR_ACM_CTRL:{
- u8 e_aci = *val;
- union aci_aifsn *p_aci_aifsn = (union aci_aifsn *)
- (&(mac->ac[0].aifs));
- u8 acm = p_aci_aifsn->f.acm;
- u8 acm_ctrl = rtl_read_byte(rtlpriv, REG_ACMHWCTRL);
-
- acm_ctrl =
- acm_ctrl | ((rtlusb->acm_method == 2) ? 0x0 : 0x1);
- if (acm) {
- switch (e_aci) {
- case AC0_BE:
- acm_ctrl |= AcmHw_BeqEn;
- break;
- case AC2_VI:
- acm_ctrl |= AcmHw_ViqEn;
- break;
- case AC3_VO:
- acm_ctrl |= AcmHw_VoqEn;
- break;
- default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
- "HW_VAR_ACM_CTRL acm set failed: eACI is %d\n",
- acm);
- break;
- }
- } else {
- switch (e_aci) {
- case AC0_BE:
- acm_ctrl &= (~AcmHw_BeqEn);
- break;
- case AC2_VI:
- acm_ctrl &= (~AcmHw_ViqEn);
- break;
- case AC3_VO:
- acm_ctrl &= (~AcmHw_VoqEn);
- break;
- default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "switch case not processed\n");
- break;
- }
- }
- RT_TRACE(rtlpriv, COMP_QOS, DBG_TRACE,
- "SetHwReg8190pci(): [HW_VAR_ACM_CTRL] Write 0x%X\n",
- acm_ctrl);
- rtl_write_byte(rtlpriv, REG_ACMHWCTRL, acm_ctrl);
break;
}
case HW_VAR_RCR:{
@@ -405,59 +405,9 @@ void rtl92c_disable_interrupt(struct ieee80211_hw *hw)
void rtl92c_set_qos(struct ieee80211_hw *hw, int aci)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
- u32 u4b_ac_param;
rtl92c_dm_init_edca_turbo(hw);
- u4b_ac_param = (u32) mac->ac[aci].aifs;
- u4b_ac_param |=
- ((u32) le16_to_cpu(mac->ac[aci].cw_min) & 0xF) <<
- AC_PARAM_ECW_MIN_OFFSET;
- u4b_ac_param |=
- ((u32) le16_to_cpu(mac->ac[aci].cw_max) & 0xF) <<
- AC_PARAM_ECW_MAX_OFFSET;
- u4b_ac_param |= (u32) le16_to_cpu(mac->ac[aci].tx_op) <<
- AC_PARAM_TXOP_OFFSET;
- RT_TRACE(rtlpriv, COMP_QOS, DBG_LOUD, "queue:%x, ac_param:%x\n",
- aci, u4b_ac_param);
- switch (aci) {
- case AC1_BK:
- rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, u4b_ac_param);
- break;
- case AC0_BE:
- rtl_write_dword(rtlpriv, REG_EDCA_BE_PARAM, u4b_ac_param);
- break;
- case AC2_VI:
- rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, u4b_ac_param);
- break;
- case AC3_VO:
- rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, u4b_ac_param);
- break;
- default:
- RT_ASSERT(false, "invalid aci: %d !\n", aci);
- break;
- }
-}
-
-/*-------------------------------------------------------------------------
- * HW MAC Address
- *-------------------------------------------------------------------------*/
-void rtl92c_set_mac_addr(struct ieee80211_hw *hw, const u8 *addr)
-{
- u32 i;
- struct rtl_priv *rtlpriv = rtl_priv(hw);
-
- for (i = 0 ; i < ETH_ALEN ; i++)
- rtl_write_byte(rtlpriv, (REG_MACID + i), *(addr+i));
-
- RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
- "MAC Address: %02X-%02X-%02X-%02X-%02X-%02X\n",
- rtl_read_byte(rtlpriv, REG_MACID),
- rtl_read_byte(rtlpriv, REG_MACID+1),
- rtl_read_byte(rtlpriv, REG_MACID+2),
- rtl_read_byte(rtlpriv, REG_MACID+3),
- rtl_read_byte(rtlpriv, REG_MACID+4),
- rtl_read_byte(rtlpriv, REG_MACID+5));
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AC_PARAM, (u8 *)&aci);
}
void rtl92c_init_driver_info_size(struct ieee80211_hw *hw, u8 size)
@@ -48,7 +48,6 @@ void rtl92c_set_qos(struct ieee80211_hw *hw, int aci);
/*---------------------------------------------------------------
* Hardware init functions
*---------------------------------------------------------------*/
-void rtl92c_set_mac_addr(struct ieee80211_hw *hw, const u8 *addr);
void rtl92c_init_interrupt(struct ieee80211_hw *hw);
void rtl92c_init_driver_info_size(struct ieee80211_hw *hw, u8 size);
I remove duplicated routines which related rtl92cu_set_hw_reg(). 1. rtl92c_set_qos() and HW_VAR_AC_PARAM routine are similar code. so i replace code with rtlpriv->cfg->ops->set_hw_reg(). 2. rtl92c_set_mac_addr() and 'HW_VAR_ETHER_ADDR' case at rtl92cu_set_hw_reg() routine are similar code. so i removed rtl92c_set_mac_addr() function. also it was not used anywhere. 3. remove HW_VAR_ACM_CTRL routine in rtl92cu_set_hw_reg(). if rtl_usb->acm_method is not EACMWAY2_SW, HW_VAR_ACM_CTRL is called from HW_VAR_AC_PARAM. but it never called. because acm_method is always EACMWAY2_SW. so i remove acm_method check routine and HW_VAR_ACM_CTRL routine. both usb and pci interface is not used HW_VAR_ACM_CTRL. but i can't test pci interface module, so i didn't modify pci code. Signed-off-by: Taehee Yoo <ap420073@gmail.com> --- drivers/net/wireless/rtlwifi/rtl8192cu/hw.c | 56 +--------------------------- drivers/net/wireless/rtlwifi/rtl8192cu/mac.c | 52 +------------------------- drivers/net/wireless/rtlwifi/rtl8192cu/mac.h | 1 - 3 files changed, 2 insertions(+), 107 deletions(-)