diff mbox

[v3,3/7] wil6210: fix boot loader "ready" indication

Message ID 1430777516-439-4-git-send-email-qca_vkondrat@qca.qualcomm.com (mailing list archive)
State Rejected
Delegated to: Kalle Valo
Headers show

Commit Message

Vladimir Kondratiev May 4, 2015, 10:11 p.m. UTC 
Boot loader "ready" indication has changed from "bit0 set"
to "only bit0 set". This is to address hardware glitches.
Due to glitches, sometimes right after reset register reads
0xffffffff, or (rarely) other garbage.

Reflect this in the driver

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
---
 drivers/net/wireless/ath/wil6210/main.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 0623d8c..146fd80 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -551,7 +551,7 @@  static inline void wil_release_cpu(struct wil6210_priv *wil)
 static int wil_target_reset(struct wil6210_priv *wil)
 {
 	int delay = 0;
-	u32 x;
+	u32 x, x1 = 0;
 
 	wil_dbg_misc(wil, "Resetting \"%s\"...\n", wil->hw_name);
 
@@ -606,12 +606,16 @@  static int wil_target_reset(struct wil6210_priv *wil)
 	do {
 		msleep(RST_DELAY);
 		x = R(RGF_USER_BL + offsetof(struct RGF_BL, ready));
+		if (x1 != x) {
+			wil_dbg_misc(wil, "BL.ready 0x%08x => 0x%08x\n", x1, x);
+			x1 = x;
+		}
 		if (delay++ > RST_COUNT) {
 			wil_err(wil, "Reset not completed, bl.ready 0x%08x\n",
 				x);
 			return -ETIME;
 		}
-	} while (!(x & BIT_BL_READY));
+	} while (x != BIT_BL_READY);
 
 	C(RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);