diff mbox

[1/2] staging: wilc1000: Fix some compile warnings

Message ID 1433018659-25958-1-git-send-email-kholmanskikh.s.s@gmail.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Stanislav Kholmanskikh May 30, 2015, 8:44 p.m. UTC
This patch reduces (a little bit) the amount of compile time
warnings.

The change of WILC_WFI_init_mon_interface() prototype seems to be ok,
because alloc_netdev() also expects 'const char *name'.

Signed-off-by: Stanislav Kholmanskikh <kholmanskikh.s.s@gmail.com>
---
 drivers/staging/wilc1000/linux_mon.c              | 2 +-
 drivers/staging/wilc1000/wilc_spi.c               | 6 +++---
 drivers/staging/wilc1000/wilc_wfi_cfgoperations.h | 2 +-
 drivers/staging/wilc1000/wilc_wlan.c              | 6 ++----
 4 files changed, 7 insertions(+), 9 deletions(-)

Comments

Greg KH May 30, 2015, 11:59 p.m. UTC | #1
On Sat, May 30, 2015 at 11:44:18PM +0300, Stanislav Kholmanskikh wrote:
> This patch reduces (a little bit) the amount of compile time
> warnings.
> 
> The change of WILC_WFI_init_mon_interface() prototype seems to be ok,
> because alloc_netdev() also expects 'const char *name'.

You are doing different types of fixes here, please be explicit about
what you are doing and break this up into logical patches that each only
do one type of thing.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Stanislav Kholmanskikh June 1, 2015, 7:02 p.m. UTC | #2
Hello.

On Sun, May 31, 2015 at 08:59:41AM +0900, Greg KH wrote:
> On Sat, May 30, 2015 at 11:44:18PM +0300, Stanislav Kholmanskikh wrote:
> > This patch reduces (a little bit) the amount of compile time
> > warnings.
> > 
> > The change of WILC_WFI_init_mon_interface() prototype seems to be ok,
> > because alloc_netdev() also expects 'const char *name'.
> 
> You are doing different types of fixes here, please be explicit about
> what you are doing and break this up into logical patches that each only
> do one type of thing.

Thank you for review.

I've just sent an updated version which addresses your comments.

Thanks.

> 
> thanks,
> 
> greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/staging/wilc1000/linux_mon.c b/drivers/staging/wilc1000/linux_mon.c
index a19be45..f0a20a9 100644
--- a/drivers/staging/wilc1000/linux_mon.c
+++ b/drivers/staging/wilc1000/linux_mon.c
@@ -522,7 +522,7 @@  static void WILC_WFI_mon_setup(struct net_device *dev)
  *  @date	12 JUL 2012
  *  @version	1.0
  */
-struct net_device *WILC_WFI_init_mon_interface(char *name, struct net_device *real_dev)
+struct net_device *WILC_WFI_init_mon_interface(const char *name, struct net_device *real_dev)
 {
 
 
diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c
index 2f38dda..46f28ca 100644
--- a/drivers/staging/wilc1000/wilc_spi.c
+++ b/drivers/staging/wilc1000/wilc_spi.c
@@ -1194,10 +1194,10 @@  static int spi_init(wilc_wlan_inp_t *inp, wilc_debug_func func)
 		/* Read failed. Try with CRC off. This might happen when module
 		 * is removed but chip isn't reset*/
 		g_spi.crc_off = 1;
-		PRINT_ER("[wilc spi]: Failed internal read protocol with CRC on, retyring with CRC off...\n", __LINE__);
+		PRINT_ER("[wilc spi %d]: Failed internal read protocol with CRC on, retyring with CRC off...\n", __LINE__);
 		if (!spi_internal_read(WILC_SPI_PROTOCOL_OFFSET, &reg)) {
-			/* Reaad failed with both CRC on and off, something went bad */
-			PRINT_ER("[wilc spi]: Failed internal read protocol...\n", __LINE__);
+			/* Read failed with both CRC on and off, something went bad */
+			PRINT_ER("[wilc spi %d]: Failed internal read protocol...\n", __LINE__);
 			return 0;
 		}
 	}
diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.h b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.h
index 9eb8f37..b63c746 100644
--- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.h
+++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.h
@@ -123,7 +123,7 @@  int WILC_WFI_DeInitHostInt(struct net_device *net);
 int WILC_WFI_InitHostInt(struct net_device *net);
 void WILC_WFI_monitor_rx(uint8_t *buff, uint32_t size);
 int WILC_WFI_deinit_mon_interface(void);
-struct net_device *WILC_WFI_init_mon_interface(char *name, struct net_device *real_dev);
+struct net_device *WILC_WFI_init_mon_interface(const char *name, struct net_device *real_dev);
 
 #ifdef TCP_ENHANCEMENTS
 #define TCP_ACK_FILTER_LINK_SPEED_THRESH 54
diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index 92ed42a..bdee5e6 100644
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -894,8 +894,6 @@  INLINE void chip_wakeup(void)
 #endif
 void chip_sleep_manually(WILC_Uint32 u32SleepTime)
 {
-	uint32_t val32;
-
 	if (genuChipPSstate != CHIP_WAKEDUP) {
 		/* chip is already sleeping. Do nothing */
 		return;
@@ -2302,7 +2300,7 @@  int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup)
 #else
 		g_wlan.tx_buffer = (uint8_t *)g_wlan.os_func.os_malloc(g_wlan.tx_buffer_size);
 #endif
-	PRINT_D(TX_DBG, "g_wlan.tx_buffer = 0x%x\n", g_wlan.tx_buffer);
+	PRINT_D(TX_DBG, "g_wlan.tx_buffer = 0x%p\n", g_wlan.tx_buffer);
 
 	if (g_wlan.tx_buffer == WILC_NULL) {
 		/* ENOBUFS	105 */
@@ -2319,7 +2317,7 @@  int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup)
   #else
 		g_wlan.rx_buffer = (uint8_t *)g_wlan.os_func.os_malloc(g_wlan.rx_buffer_size);
   #endif
-	PRINT_D(TX_DBG, "g_wlan.rx_buffer =0x%x\n", g_wlan.rx_buffer);
+	PRINT_D(TX_DBG, "g_wlan.rx_buffer =0x%p\n", g_wlan.rx_buffer);
 	if (g_wlan.rx_buffer == WILC_NULL) {
 		/* ENOBUFS	105 */
 		ret = -105;