| Message ID | 1433512898-30137-2-git-send-email-ap420073@gmail.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Delegated to: | Kalle Valo |
| Headers | show |
On 06/05/2015 09:01 AM, Taehee Yoo wrote: > In the rtlwifi/rtl8192cu, I change debug message "RTL8192CE" to > "RTL8192CU". > > Signed-off-by: Taehee Yoo <ap420073@gmail.com> > --- > drivers/net/wireless/rtlwifi/rtl8192cu/phy.c | 10 +++++----- > 1 file changed, 5 insertions(+), 5 deletions(-) I am not sure that anyone ever uses this level of debug, but the changes are OK. Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Larry > > diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c > index 12f6d47..5534dad 100644 > --- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c > +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c > @@ -162,7 +162,7 @@ bool _rtl92cu_phy_config_mac_with_headerfile(struct ieee80211_hw *hw) > RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Read Rtl819XMACPHY_Array\n"); > arraylength = rtlphy->hwparam_tables[MAC_REG].length ; > ptrarray = rtlphy->hwparam_tables[MAC_REG].pdata; > - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Img:RTL8192CEMAC_2T_ARRAY\n"); > + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Img:RTL8192CUMAC_2T_ARRAY\n"); > for (i = 0; i < arraylength; i = i + 2) > rtl_write_byte(rtlpriv, ptrarray[i], (u8) ptrarray[i + 1]); > return true; > @@ -259,18 +259,18 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw, > radiob_arraylen = rtlphy->hwparam_tables[RADIOB_2T].length; > radiob_array_table = rtlphy->hwparam_tables[RADIOB_2T].pdata; > RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, > - "Radio_A:RTL8192CERADIOA_2TARRAY\n"); > + "Radio_A:RTL8192CURADIOA_2TARRAY\n"); > RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, > - "Radio_B:RTL8192CE_RADIOB_2TARRAY\n"); > + "Radio_B:RTL8192CU_RADIOB_2TARRAY\n"); > } else { > radioa_arraylen = rtlphy->hwparam_tables[RADIOA_1T].length; > radioa_array_table = rtlphy->hwparam_tables[RADIOA_1T].pdata; > radiob_arraylen = rtlphy->hwparam_tables[RADIOB_1T].length; > radiob_array_table = rtlphy->hwparam_tables[RADIOB_1T].pdata; > RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, > - "Radio_A:RTL8192CE_RADIOA_1TARRAY\n"); > + "Radio_A:RTL8192CU_RADIOA_1TARRAY\n"); > RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, > - "Radio_B:RTL8192CE_RADIOB_1TARRAY\n"); > + "Radio_B:RTL8192CU_RADIOB_1TARRAY\n"); > } > RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Radio No %x\n", rfpath); > switch (rfpath) { > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c index 12f6d47..5534dad 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c @@ -162,7 +162,7 @@ bool _rtl92cu_phy_config_mac_with_headerfile(struct ieee80211_hw *hw) RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Read Rtl819XMACPHY_Array\n"); arraylength = rtlphy->hwparam_tables[MAC_REG].length ; ptrarray = rtlphy->hwparam_tables[MAC_REG].pdata; - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Img:RTL8192CEMAC_2T_ARRAY\n"); + RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Img:RTL8192CUMAC_2T_ARRAY\n"); for (i = 0; i < arraylength; i = i + 2) rtl_write_byte(rtlpriv, ptrarray[i], (u8) ptrarray[i + 1]); return true; @@ -259,18 +259,18 @@ bool rtl92cu_phy_config_rf_with_headerfile(struct ieee80211_hw *hw, radiob_arraylen = rtlphy->hwparam_tables[RADIOB_2T].length; radiob_array_table = rtlphy->hwparam_tables[RADIOB_2T].pdata; RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, - "Radio_A:RTL8192CERADIOA_2TARRAY\n"); + "Radio_A:RTL8192CURADIOA_2TARRAY\n"); RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, - "Radio_B:RTL8192CE_RADIOB_2TARRAY\n"); + "Radio_B:RTL8192CU_RADIOB_2TARRAY\n"); } else { radioa_arraylen = rtlphy->hwparam_tables[RADIOA_1T].length; radioa_array_table = rtlphy->hwparam_tables[RADIOA_1T].pdata; radiob_arraylen = rtlphy->hwparam_tables[RADIOB_1T].length; radiob_array_table = rtlphy->hwparam_tables[RADIOB_1T].pdata; RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, - "Radio_A:RTL8192CE_RADIOA_1TARRAY\n"); + "Radio_A:RTL8192CU_RADIOA_1TARRAY\n"); RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, - "Radio_B:RTL8192CE_RADIOB_1TARRAY\n"); + "Radio_B:RTL8192CU_RADIOB_1TARRAY\n"); } RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Radio No %x\n", rfpath); switch (rfpath) {
In the rtlwifi/rtl8192cu, I change debug message "RTL8192CE" to "RTL8192CU". Signed-off-by: Taehee Yoo <ap420073@gmail.com> --- drivers/net/wireless/rtlwifi/rtl8192cu/phy.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)