@@ -1,4 +1,4 @@
-/* ////////////////////////////////////////////////////////////////////////// */
+/* ///////////////////////////////////////////////////////////////////////// */
/* */
/* Copyright (c) Atmel Corporation. All rights reserved. */
/* */
@@ -168,7 +168,8 @@ typedef struct {
int (*wlan_cfg_get)(int, u32, int, u32);
int (*wlan_cfg_get_value)(u32, u8 *, u32);
/*Bug3959: transmitting mgmt frames received from host*/
- int (*wlan_add_mgmt_to_tx_que)(void *, u8 *, u32, wilc_tx_complete_func_t);
+ int (*wlan_add_mgmt_to_tx_que)(void *, u8 *, u32,
+ wilc_tx_complete_func_t);
} wilc_wlan_oup_t;
/********************************************
@@ -216,16 +217,16 @@ typedef enum {
} TX_RATE_T;
typedef enum {
- B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */
- G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */
- G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */
- G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */
+ B_ONLY_MODE = 0, /* 1, 2 M, otherwise: 5, 11 M */
+ G_ONLY_MODE, /* 6, 12, 24 M, otherwise: 9, 18, 36, 48, 54 M */
+ G_MIXED_11B_1_MODE, /* 1, 2, 5.5, 11 M, otherwise: all on */
+ G_MIXED_11B_2_MODE, /* 1, 2, 5, 11, 6, 12, 24 M, otherwise: all on */
} G_OPERATING_MODE_T;
typedef enum {
- G_SHORT_PREAMBLE = 0, /* Short Preamble */
- G_LONG_PREAMBLE = 1, /* Long Preamble */
- G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
+ G_SHORT_PREAMBLE = 0, /* Short Preamble */
+ G_LONG_PREAMBLE = 1, /* Long Preamble */
+ G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
} G_PREAMBLE_T;
#define MAC_CONNECTED 1
@@ -349,10 +350,10 @@ typedef enum {
} N_OBSS_DETECTION_T;
typedef enum {
- RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
- FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
- LSIG_TXOP_PROT, /* LSIG TXOP Protection */
- FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
+ RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
+ FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
+ LSIG_TXOP_PROT, /* LSIG TXOP Protection */
+ FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
} N_PROTECTION_TYPE_T;
typedef enum {
@@ -387,237 +388,299 @@ typedef enum {
typedef enum {
WID_NIL = 0xffff,
- /* BSS Type */
- /* -------------------------------------------------------------- */
- /* Configuration : Infrastructure Independent Access Point */
- /* Values to set : 0 1 2 */
- /* -------------------------------------------------------------- */
+ /*
+ * BSS Type
+ * -----------------------------------------------------------
+ * Configuration : Infrastructure Independent Access Point
+ * Values to set : 0 1 2
+ * -----------------------------------------------------------
+ */
WID_BSS_TYPE = 0x0000,
- /* Transmit Rate */
- /* -------------------------------------------------------------- */
- /* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */
- /* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */
- /* -------------------------------------------------------------- */
+ /*
+ * Transmit Rate
+ * -----------------------------------------------------------
+ * Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54
+ * Values to set : 1 2 5 11 6 9 12 18 24 36 48 54
+ * -----------------------------------------------------------
+ */
WID_CURRENT_TX_RATE = 0x0001,
- /* Channel */
- /* ------------------------------------------------------------------- */
- /* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
- /* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
- /* -------------------------------------------------------------------- */
+ /*
+ * Channel
+ * -----------------------------------------------------------
+ * Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
+ * Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14
+ * -----------------------------------------------------------
+ */
WID_CURRENT_CHANNEL = 0x0002,
- /* Preamble */
- /* -------------------------------------------------------------- */
- /* Configuration : short long Auto */
- /* Values to set : 0 1 2 */
- /* -------------------------------------------------------------- */
+ /*
+ * Preamble
+ * -----------------------------------------------------------
+ * Configuration : short long Auto
+ * Values to set : 0 1 2
+ * -----------------------------------------------------------
+ */
WID_PREAMBLE = 0x0003,
- /* 11g operating mode (ignored if 11g not present) */
- /* -------------------------------------------------------------- */
- /* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */
- /* Values to set : 1 2 3 */
- /* -------------------------------------------------------------- */
+ /*
+ * 11g operating mode (ignored if 11g not present)
+ * -----------------------------------------------------------
+ * Configuration : HighPerf Compat(RSet #1) Compat(RSet #2)
+ * Values to set : 1 2 3
+ * -----------------------------------------------------------
+ */
WID_11G_OPERATING_MODE = 0x0004,
- /* Mac status (response only) */
- /* -------------------------------------------------------------- */
- /* Configuration : disconnect connect */
- /* Values to get : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * Mac status (response only)
+ * -----------------------------------------------------------
+ * Configuration : disconnect connect
+ * Values to get : 0 1
+ * -----------------------------------------------------------
+ */
WID_STATUS = 0x0005,
- /* Scan type */
- /* -------------------------------------------------------------- */
- /* Configuration : Passive Scanning Active Scanning */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * Scan type
+ * -----------------------------------------------------------
+ * Configuration : Passive Scanning Active Scanning
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_SCAN_TYPE = 0x0007,
- /* Key Id (WEP default key Id) */
- /* -------------------------------------------------------------- */
- /* Configuration : Any value between 0 to 3 */
- /* Values to set : Same value. Default is 0 */
- /* -------------------------------------------------------------- */
+ /*
+ * Key Id (WEP default key Id)
+ * -----------------------------------------------------------
+ * Configuration : Any value between 0 to 3
+ * Values to set : Same value. Default is 0
+ * -----------------------------------------------------------
+ */
WID_KEY_ID = 0x0009,
- /* QoS Enable */
- /* -------------------------------------------------------------- */
- /* Configuration : QoS Disable WMM Enable */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * QoS Enable
+ * -----------------------------------------------------------
+ * Configuration : QoS Disable WMM Enable
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_QOS_ENABLE = 0x000A,
- /* Power Management */
- /* ------------------------------------------------------------------ */
- /* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */
- /* Values to set : 0 1 2 */
- /* ------------------------------------------------------------------ */
+ /*
+ * Power Management
+ * -----------------------------------------------------------
+ * Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
+ * Values to set : 0 1 2
+ * -----------------------------------------------------------
+ */
WID_POWER_MANAGEMENT = 0x000B,
- /* WEP/802 11I Configuration */
- /* ------------------------------------------------------------------ */
- /* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */
- /* Values (0x) : 00 03 07 29 49 31 51 */
- /* */
- /* Configuration : WPA-AES+TKIP RSN-AES+TKIP */
- /* Values (0x) : 69 71 */
- /* ------------------------------------------------------------------ */
+ /*
+ * WEP/802 11I Configuration
+ * -----------------------------------------------------------
+ * Conf : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
+ * Val(0x) : 00 03 07 29 49 31 51
+ * -----------------------------------------------------------
+ * Configuration : WPA-AES+TKIP RSN-AES+TKIP
+ * Values (0x) : 69 71
+ * -----------------------------------------------------------
+ */
WID_11I_MODE = 0x000C,
- /* WEP Configuration: Used in BSS STA mode only when WEP is enabled */
- /* ------------------------------------------------------------------ */
- /* Configuration : Open System Shared Key Any Type | 802.1x Auth */
- /* Values (0x) : 01 02 03 | BIT2 */
- /* ------------------------------------------------------------------ */
+ /*
+ * WEP Configuration: Used in BSS STA mode only when WEP is enabled
+ * -----------------------------------------------------------
+ * Configuration : Open System Shared Key Any Type | 802.1x Auth
+ * Values (0x) : 01 02 03 | BIT2
+ * -----------------------------------------------------------
+ */
WID_AUTH_TYPE = 0x000D,
- /* Site Survey Type */
- /* -------------------------------------------------------------- */
- /* Configuration : Values to set */
- /* Survey 1 Channel : 0 */
- /* survey all Channels : 1 */
- /* Disable Site Survey : 2 */
- /* -------------------------------------------------------------- */
+ /*
+ * Site Survey Type
+ * -----------------------------------------------------------
+ * Configuration : Values to set
+ * Survey 1 Channel : 0
+ * survey all Channels : 1
+ * Disable Site Survey : 2
+ * -----------------------------------------------------------
+ */
WID_SITE_SURVEY = 0x000E,
- /* Listen Interval */
- /* -------------------------------------------------------------- */
- /* Configuration : Any value between 1 to 255 */
- /* Values to set : Same value. Default is 3 */
- /* -------------------------------------------------------------- */
+ /*
+ * Listen Interval
+ * -----------------------------------------------------------
+ * Configuration : Any value between 1 to 255
+ * Values to set : Same value. Default is 3
+ * -----------------------------------------------------------
+ */
WID_LISTEN_INTERVAL = 0x000F,
- /* DTIM Period */
- /* -------------------------------------------------------------- */
- /* Configuration : Any value between 1 to 255 */
- /* Values to set : Same value. Default is 3 */
- /* -------------------------------------------------------------- */
+ /*
+ * DTIM Period
+ * -----------------------------------------------------------
+ * Configuration : Any value between 1 to 255
+ * Values to set : Same value. Default is 3
+ * -----------------------------------------------------------
+ */
WID_DTIM_PERIOD = 0x0010,
- /* ACK Policy */
- /* -------------------------------------------------------------- */
- /* Configuration : Normal Ack No Ack */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * ACK Policy
+ * -----------------------------------------------------------
+ * Configuration : Normal Ack No Ack
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_ACK_POLICY = 0x0011,
- /* Reset MAC (Set only) */
- /* -------------------------------------------------------------- */
- /* Configuration : Don't Reset Reset No Request */
- /* Values to set : 0 1 2 */
- /* -------------------------------------------------------------- */
+ /*
+ * Reset MAC (Set only)
+ * -----------------------------------------------------------
+ * Configuration : Don't Reset Reset No Request
+ * Values to set : 0 1 2
+ * -----------------------------------------------------------
+ */
WID_RESET = 0x0012,
- /* Broadcast SSID Option: Setting this will adhere to "" SSID element */
- /* ------------------------------------------------------------------ */
- /* Configuration : Enable Disable */
- /* Values to set : 1 0 */
- /* ------------------------------------------------------------------ */
+ /*
+ * Broadcast SSID Option: Setting this will adhere to "" SSID element
+ * -----------------------------------------------------------
+ * Configuration : Enable Disable
+ * Values to set : 1 0
+ * -----------------------------------------------------------
+ */
WID_BCAST_SSID = 0x0015,
- /* Disconnect (Station) */
- /* ------------------------------------------------------------------ */
- /* Configuration : Association ID */
- /* Values to set : Association ID */
- /* ------------------------------------------------------------------ */
+ /*
+ * Disconnect (Station)
+ * -----------------------------------------------------------
+ * Configuration : Association ID
+ * Values to set : Association ID
+ * -----------------------------------------------------------
+ */
WID_DISCONNECT = 0x0016,
- /* 11a Tx Power Level */
- /* -------------------------------------------------------------------- */
- /* Configuration : Sets TX Power (Higher the value greater the power) */
- /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
- /* -------------------------------------------------------------------- */
+ /*
+ * 11a Tx Power Level
+ * -----------------------------------------------------------
+ * Conf : Sets TX Power (Higher the value greater the power)
+ * Values : Any value between 0 and 63 (inclusive; Default is 48)
+ * -----------------------------------------------------------
+ */
WID_TX_POWER_LEVEL_11A = 0x0018,
- /* Group Key Update Policy Selection */
- /* -------------------------------------------------------------------- */
- /* Configuration : Disabled timeBased packetBased timePacketBased */
- /* Values to set : 1 2 3 4 */
- /* -------------------------------------------------------------------- */
+ /*
+ * Group Key Update Policy Selection
+ * -----------------------------------------------------------
+ * Configuration : Disabled timeBased packetBased timePacketBased
+ * Values to set : 1 2 3 4
+ * -----------------------------------------------------------
+ */
WID_REKEY_POLICY = 0x0019,
- /* Allow Short Slot */
- /* -------------------------------------------------------------- */
- /* Configuration : Disallow Short Slot Allow Short Slot */
- /* (Enable Only Long Slot) (Enable Short Slot if applicable)*/
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * Allow Short Slot
+ * -----------------------------------------------------------
+ * Configuration : Disallow Short Slot Allow Short Slot
+ * (Enable Only Long Slot) (Enable Short Slot if applicable)
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_SHORT_SLOT_ALLOWED = 0x001A,
WID_PHY_ACTIVE_REG = 0x001B,
- /* 11b Tx Power Level */
- /* -------------------------------------------------------------------- */
- /* Configuration : Sets TX Power (Higher the value greater the power) */
- /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
- /* -------------------------------------------------------------------- */
+ /*
+ * 11b Tx Power Level
+ * -----------------------------------------------------------
+ * Configuration : Sets TX Power (Higher the value greater the power)
+ * Values to set : Any value between 0 and 63 (inclusive; Default 48)
+ * -----------------------------------------------------------
+ */
WID_TX_POWER_LEVEL_11B = 0x001D,
- /* Scan Request */
- /* -------------------------------------------------------------------- */
- /* Configuration : Request default scan */
- /* Values to set : 0 */
- /* -------------------------------------------------------------------- */
+ /*
+ * Scan Request
+ * -----------------------------------------------------------
+ * Configuration : Request default scan
+ * Values to set : 0
+ * -----------------------------------------------------------
+ */
WID_START_SCAN_REQ = 0x001E,
- /* Rssi (get only) */
- /* -------------------------------------------------------------------- */
- /* Configuration : */
- /* Values to get : Rssi value */
- /* -------------------------------------------------------------------- */
+ /*
+ * Rssi (get only)
+ * -----------------------------------------------------------
+ * Configuration :
+ * Values to get : Rssi value
+ * -----------------------------------------------------------
+ */
WID_RSSI = 0x001F,
- /* Join Request */
- /* -------------------------------------------------------------------- */
- /* Configuration : Request to join */
- /* Values to set : index of scan result */
- /* -------------------------------------------------------------------- */
+ /*
+ * Join Request
+ * -----------------------------------------------------------
+ * Configuration : Request to join
+ * Values to set : index of scan result
+ * -----------------------------------------------------------
+ */
WID_JOIN_REQ = 0x0020,
- WID_LINKSPEED = 0x0026,
+ WID_LINKSPEED = 0x0026,
- /* Enable User Control of TX Power */
- /* -------------------------------------------------------------------- */
- /* Configuration : Disable Enable */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------------- */
+ /*
+ * Enable User Control of TX Power
+ * -----------------------------------------------------------
+ * Configuration : Disable Enable
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_USER_CONTROL_ON_TX_POWER = 0x0027,
WID_MEMORY_ACCESS_8BIT = 0x0029,
- /* Enable Auto RX Sensitivity feature */
- /* -------------------------------------------------------------------- */
- /* Configuration : Disable Enable */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------------- */
+ /*
+ * Enable Auto RX Sensitivity feature
+ * -----------------------------------------------------------
+ * Configuration : Disable Enable
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_AUTO_RX_SENSITIVITY = 0x0032,
- /* Receive Buffer Based Ack */
- /* -------------------------------------------------------------------- */
- /* Configuration : Disable Enable */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------------- */
+ /*
+ * Receive Buffer Based Ack
+ * -----------------------------------------------------------
+ * Configuration : Disable Enable
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_DATAFLOW_CONTROL = 0x0033,
- /* Scan Filter */
- /* -------------------------------------------------------------------- */
- /* Configuration : Class No filter AP only Station Only */
- /* Values to set : 0 1 2 */
- /* Configuration : Priority High Rssi Low Rssi Detect */
- /* Values to set : 0 0x4 0x08 */
- /* Configuration : Channel filter off filter on */
- /* Values to set : 0 0x10 */
- /* -------------------------------------------------------------------- */
+ /*
+ * Scan Filter
+ * -----------------------------------------------------------
+ * Configuration : Class No filter AP only Station Only
+ * Values to set : 0 1 2
+ * Configuration : Priority High Rssi Low Rssi Detect
+ * Values to set : 0 0x4 0x08
+ * Configuration : Channel filter off filter on
+ * Values to set : 0 0x10
+ * -----------------------------------------------------------
+ */
WID_SCAN_FILTER = 0x0036,
- /* Link Loss Threshold (measure in the beacon period) */
- /* -------------------------------------------------------------------- */
- /* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */
- /* Values to set : Same value. Default is 10 */
- /* -------------------------------------------------------------------- */
+ /*
+ * Link Loss Threshold (measure in the beacon period)
+ * -----------------------------------------------------------
+ * Configuration : Any value 10 ~ 254 (Set to 255 to disable it)
+ * Values to set : Same value. Default is 10
+ * -----------------------------------------------------------
+ */
WID_LINK_LOSS_THRESHOLD = 0x0037,
/*BugID_4978*/
@@ -626,103 +689,127 @@ typedef enum {
/* NMAC Character WID list */
WID_WPS_START = 0x0043,
- /* Protection mode for MAC */
- /* -------------------------------------------------------------- */
- /* Configuration : Auto No protection ERP HT GF */
- /* Values to set : 0 1 2 3 4 */
- /* -------------------------------------------------------------- */
+ /*
+ * Protection mode for MAC
+ * -----------------------------------------------------------
+ * Configuration : Auto No protection ERP HT GF
+ * Values to set : 0 1 2 3 4
+ * -----------------------------------------------------------
+ */
WID_11N_PROT_MECH = 0x0080,
- /* ERP Protection type for MAC */
- /* -------------------------------------------------------------- */
- /* Configuration : Self-CTS RTS-CTS */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * ERP Protection type for MAC
+ * -----------------------------------------------------------
+ * Configuration : Self-CTS RTS-CTS
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_11N_ERP_PROT_TYPE = 0x0081,
- /* HT Option Enable */
- /* -------------------------------------------------------------- */
- /* Configuration : HT Enable HT Disable */
- /* Values to set : 1 0 */
- /* -------------------------------------------------------------- */
+ /*
+ * HT Option Enable
+ * -----------------------------------------------------------
+ * Configuration : HT Enable HT Disable
+ * Values to set : 1 0
+ * -----------------------------------------------------------
+ */
WID_11N_ENABLE = 0x0082,
- /* 11n Operating mode (Note that 11g operating mode will also be */
- /* used in addition to this, if this is set to HT Mixed mode) */
- /* -------------------------------------------------------------- */
- /* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */
- /* Values to set : 1 2 3 */
- /* -------------------------------------------------------------- */
+ /*
+ * 11n Operating mode (Note that 11g operating mode will also be
+ * used in addition to this, if this is set to HT Mixed mode)
+ * -----------------------------------------------------------
+ * Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz
+ * Values to set : 1 2 3
+ * -----------------------------------------------------------
+ */
WID_11N_OPERATING_MODE = 0x0083,
- /* 11n OBSS non-HT STA Detection flag */
- /* -------------------------------------------------------------- */
- /* Configuration : Do not detect */
- /* Values to set : 0 */
- /* Configuration : Detect, do not protect or report */
- /* Values to set : 1 */
- /* Configuration : Detect, protect and do not report */
- /* Values to set : 2 */
- /* Configuration : Detect, protect and report to other BSS */
- /* Values to set : 3 */
- /* -------------------------------------------------------------- */
+ /*
+ * 11n OBSS non-HT STA Detection flag
+ * -----------------------------------------------------------
+ * Configuration : Do not detect
+ * Values to set : 0
+ * Configuration : Detect, do not protect or report
+ * Values to set : 1
+ * Configuration : Detect, protect and do not report
+ * Values to set : 2
+ * Configuration : Detect, protect and report to other BSS
+ * Values to set : 3
+ * -----------------------------------------------------------
+ */
WID_11N_OBSS_NONHT_DETECTION = 0x0084,
- /* 11n HT Protection Type */
- /* -------------------------------------------------------------- */
- /* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */
- /* Values to set : 0 1 */
- /* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */
- /* Values to set : 2 3 */
- /* -------------------------------------------------------------- */
+ /*
+ * 11n HT Protection Type
+ * -----------------------------------------------------------
+ * Configuration : RTS-CTS First Frame Exchange at non-HT-rate
+ * Values to set : 0 1
+ * Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt
+ * Values to set : 2 3
+ * -----------------------------------------------------------
+ */
WID_11N_HT_PROT_TYPE = 0x0085,
- /* 11n RIFS Protection Enable Flag */
- /* -------------------------------------------------------------- */
- /* Configuration : Disable Enable */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * 11n RIFS Protection Enable Flag
+ * -----------------------------------------------------------
+ * Configuration : Disable Enable
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_11N_RIFS_PROT_ENABLE = 0x0086,
- /* SMPS Mode */
- /* -------------------------------------------------------------- */
- /* Configuration : Static Dynamic MIMO (Power Save Disabled) */
- /* Values to set : 1 2 3 */
- /* -------------------------------------------------------------- */
+ /*
+ * SMPS Mode
+ * -----------------------------------------------------------
+ * Configuration : Static Dynamic MIMO (Power Save Disabled)
+ * Values to set : 1 2 3
+ * -----------------------------------------------------------
+ */
WID_11N_SMPS_MODE = 0x0087,
- /* Current transmit MCS */
- /* -------------------------------------------------------------- */
- /* Configuration : MCS Index for data rate */
- /* Values to set : 0 to 7 */
- /* -------------------------------------------------------------- */
+ /*
+ * Current transmit MCS
+ * -----------------------------------------------------------
+ * Configuration : MCS Index for data rate
+ * Values to set : 0 to 7
+ * -----------------------------------------------------------
+ */
WID_11N_CURRENT_TX_MCS = 0x0088,
WID_11N_PRINT_STATS = 0x0089,
- /* 11n Short GI Enable Flag */
- /* -------------------------------------------------------------- */
- /* Configuration : Disable Enable */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * 11n Short GI Enable Flag
+ * -----------------------------------------------------------
+ * Configuration : Disable Enable
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_11N_SHORT_GI_ENABLE = 0x008D,
- /* 11n RIFS Enable Flag */
- /* -------------------------------------------------------------- */
- /* Configuration : Disable Enable */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * 11n RIFS Enable Flag
+ * -----------------------------------------------------------
+ * Configuration : Disable Enable
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_RIFS_MODE = 0x0094,
- /* TX Abort Feature */
- /* -------------------------------------------------------------- */
- /* Configuration : Disable Self CTS Enable Self CTS */
- /* Values to set : 0 1 */
- /* Configuration : Disable TX Abort Enable TX Abort */
- /* Values to set : 2 3 */
- /* Configuration : Enable HW TX Abort Enable SW TX Abort */
- /* Values to set : 4 5 */
- /* -------------------------------------------------------------- */
+ /*
+ * TX Abort Feature
+ * -----------------------------------------------------------
+ * Configuration : Disable Self CTS Enable Self CTS
+ * Values to set : 0 1
+ * Configuration : Disable TX Abort Enable TX Abort
+ * Values to set : 2 3
+ * Configuration : Enable HW TX Abort Enable SW TX Abort
+ * Values to set : 4 5
+ * -----------------------------------------------------------
+ */
WID_TX_ABORT_CONFIG = 0x00A1,
WID_REG_TSSI_11B_VALUE = 0x00A6,
@@ -733,18 +820,22 @@ typedef enum {
WID_DSCR_TSSI_11G_VALUE = 0x00AB,
WID_DSCR_TSSI_11N_VALUE = 0x00AC,
- /* Immediate Block-Ack Support */
- /* -------------------------------------------------------------- */
- /* Configuration : Disable Enable */
- /* Values to set : 0 1 */
- /* -------------------------------------------------------------- */
+ /*
+ * Immediate Block-Ack Support
+ * -----------------------------------------------------------
+ * Configuration : Disable Enable
+ * Values to set : 0 1
+ * -----------------------------------------------------------
+ */
WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
- /* TXOP Disable Flag */
- /* -------------------------------------------------------------- */
- /* Configuration : Disable Enable */
- /* Values to set : 1 0 */
- /* -------------------------------------------------------------- */
+ /*
+ * TXOP Disable Flag
+ * -----------------------------------------------------------
+ * Configuration : Disable Enable
+ * Values to set : 1 0
+ * -----------------------------------------------------------
+ */
WID_11N_TXOP_PROT_DISABLE = 0x00B0,
WID_TX_POWER_LEVEL_11N = 0x00B1,
@@ -758,19 +849,23 @@ typedef enum {
WID_DEL_BEACON = 0x00CA,
WID_LOGTerminal_Switch = 0x00CD,
- /* EMAC Short WID list */
- /* RTS Threshold */
- /* -------------------------------------------------------------- */
- /* Configuration : Any value between 256 to 2347 */
- /* Values to set : Same value. Default is 2347 */
- /* -------------------------------------------------------------- */
+ /* EMAC Short WID list */
+ /* RTS Threshold */
+ /*
+ * -----------------------------------------------------------
+ * Configuration : Any value between 256 to 2347
+ * Values to set : Same value. Default is 2347
+ * -----------------------------------------------------------
+ */
WID_RTS_THRESHOLD = 0x1000,
- /* Fragmentation Threshold */
- /* -------------------------------------------------------------- */
- /* Configuration : Any value between 256 to 2346 */
- /* Values to set : Same value. Default is 2346 */
- /* -------------------------------------------------------------- */
+ /*
+ * Fragmentation Threshold
+ * -----------------------------------------------------------
+ * Configuration : Any value between 256 to 2346
+ * Values to set : Same value. Default is 2346
+ * -----------------------------------------------------------
+ */
WID_FRAG_THRESHOLD = 0x1001,
WID_SHORT_RETRY_LIMIT = 0x1002,
@@ -855,9 +950,9 @@ typedef enum {
WID_ASSOC_REQ_INFO = 0x301F,
WID_ASSOC_RES_INFO = 0x3020,
WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
- WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
+ WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
- WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
+ WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
/* NMAC String WID list */
WID_11N_P_ACTION_REQ = 0x3080,
@@ -869,7 +964,10 @@ typedef enum {
WID_REMAIN_ON_CHAN = 0x3996,
/*BugID_4156*/
WID_SSID_PROBE_REQ = 0x3997,
- /*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/
+ /*
+ * BugID_4124 WID to trigger modified Join Request using
+ * SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)
+ */
WID_JOIN_REQ_EXTENDED = 0x3998,
/* BugID 4951: WID toset IP address in firmware */