@@ -10,7 +10,7 @@ ccflags-y += -DSTA_FIRMWARE=\"atmel/wilc1000_fw.bin\" \
ccflags-y += -I$(src)/ -D__CHECK_ENDIAN__ -DWILC_ASIC_A0 \
-DPLL_WORKAROUND -DCONNECT_DIRECT -DAGING_ALG \
- -DWILC_PARSE_SCAN_IN_HOST -DDISABLE_PWRSAVE_AND_SCAN_DURING_IP \
+ -DWILC_PARSE_SCAN_IN_HOST \
-Wno-unused-function -DWILC_DEBUGFS
#ccflags-y += -DTCP_ACK_FILTER
@@ -4,9 +4,7 @@
extern u8 connecting;
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
extern struct timer_list hDuringIpTimer;
-#endif
extern u8 g_wilc_initialized;
/*****************************************************************************/
@@ -518,9 +516,7 @@ typedef enum {
static tstrWILC_WFIDrv *wfidrv_list[NUM_CONCURRENT_IFC + 1];
tstrWILC_WFIDrv *terminated_handle;
tstrWILC_WFIDrv *gWFiDrvHandle;
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
bool g_obtainingIP = false;
-#endif
u8 P2P_LISTEN_STATE;
static struct task_struct *HostIFthreadHandler;
static WILC_MsgQueueHandle gMsgQHostIF;
@@ -1307,14 +1303,12 @@ static s32 Handle_Scan(tstrWILC_WFIDrv *drvHandler,
goto ERRORHANDLER;
}
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
if (g_obtainingIP || connecting) {
PRINT_D(GENERIC_DBG, "[handle_scan]: Don't do obss scan until IP adresss is obtained\n");
PRINT_ER("Don't do obss scan\n");
s32Error = -EBUSY;
goto ERRORHANDLER;
}
- #endif
PRINT_D(HOSTINF_DBG, "Setting SCAN params\n");
@@ -2525,20 +2519,15 @@ static s32 Handle_RcvdGnrlAsyncInfo(tstrWILC_WFIDrv *drvHandler,
* else change state to IDLE */
if ((u8MacStatus == MAC_CONNECTED) &&
(strConnectInfo.u16ConnectStatus == SUCCESSFUL_STATUSCODE)) {
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
-
host_int_set_power_mgmt(pstrWFIDrv, 0, 0);
- #endif
PRINT_D(HOSTINF_DBG, "MAC status : CONNECTED and Connect Status : Successful\n");
pstrWFIDrv->enuHostIFstate = HOST_IF_CONNECTED;
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
PRINT_D(GENERIC_DBG, "Obtaining an IP, Disable Scan\n");
g_obtainingIP = true;
mod_timer(&hDuringIpTimer,
jiffies + msecs_to_jiffies(10000));
- #endif
#ifdef WILC_PARSE_SCAN_IN_HOST
/* open a BA session if possible */
@@ -2601,11 +2590,8 @@ static s32 Handle_RcvdGnrlAsyncInfo(tstrWILC_WFIDrv *drvHandler,
strDisconnectNotifInfo.ie_len = 0;
if (pstrWFIDrv->strWILC_UsrConnReq.pfUserConnectResult != NULL) {
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
-
g_obtainingIP = false;
host_int_set_power_mgmt(pstrWFIDrv, 0, 0);
- #endif
pstrWFIDrv->strWILC_UsrConnReq.pfUserConnectResult(CONN_DISCONN_EVENT_DISCONN_NOTIF,
NULL,
@@ -3076,11 +3062,8 @@ static void Handle_Disconnect(tstrWILC_WFIDrv *drvHandler)
PRINT_D(HOSTINF_DBG, "Sending disconnect request\n");
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
-
g_obtainingIP = false;
host_int_set_power_mgmt(pstrWFIDrv, 0, 0);
- #endif
memset(u8ConnectedSSID, 0, ETH_ALEN);
@@ -3806,13 +3789,11 @@ static int Handle_RemainOnChan(tstrWILC_WFIDrv *drvHandler,
goto ERRORHANDLER;
}
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
if (g_obtainingIP || connecting) {
PRINT_D(GENERIC_DBG, "[handle_scan]: Don't do obss scan until IP adresss is obtained\n");
s32Error = -EBUSY;
goto ERRORHANDLER;
}
- #endif
PRINT_D(HOSTINF_DBG, "Setting channel :%d\n", pstrHostIfRemainOnChan->u16Channel);
@@ -6389,10 +6370,7 @@ s32 host_int_init(tstrWILC_WFIDrv **phWFIDrv)
goto _fail_timer_2;
}
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
-
g_obtainingIP = false;
- #endif
PRINT_D(HOSTINF_DBG, "Global handle pointer value=%p\n", pstrWFIDrv);
/* /////////////////////////////////////// */
@@ -17,9 +17,7 @@
#include <linux/init.h>
#include <linux/netdevice.h>
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
#include <linux/inetdevice.h>
-#endif
#include <linux/etherdevice.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -47,16 +45,12 @@
#define _linux_wlan_device_removal() {}
#endif
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
extern bool g_obtainingIP;
-#endif
extern u16 Set_machw_change_vir_if(bool bValue);
extern void resolve_disconnect_aberration(void *drvHandler);
extern u8 gau8MulticastMacAddrList[WILC_MULTICAST_TABLE_SIZE][ETH_ALEN];
void wilc1000_wlan_deinit(linux_wlan_t *nic);
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
extern struct timer_list hDuringIpTimer;
-#endif
static int linux_wlan_device_power(int on_off)
{
@@ -86,13 +80,11 @@ static int linux_wlan_device_detection(int on_off)
return 0;
}
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr);
static struct notifier_block g_dev_notifier = {
.notifier_call = dev_state_ev_handler
};
-#endif
#define wilc_wlan_deinit(nic) { if (&g_linux_wlan->oup != NULL) \
if (g_linux_wlan->oup.wlan_cleanup != NULL) \
@@ -196,7 +188,6 @@ static int DebuggingThreadTask(void *vp)
}
#endif
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
static int dev_state_ev_handler(struct notifier_block *this, unsigned long event, void *ptr)
{
struct in_ifaddr *dev_iface = (struct in_ifaddr *)ptr;
@@ -295,7 +286,6 @@ static int dev_state_ev_handler(struct notifier_block *this, unsigned long event
return NOTIFY_DONE;
}
-#endif
#if (defined WILC_SPI) || (defined WILC_SDIO_IRQ_GPIO)
static irqreturn_t isr_uh_routine(int irq, void *user_data)
@@ -1844,9 +1834,7 @@ int wilc_netdev_init(void)
if (!g_linux_wlan)
return -ENOMEM;
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
register_inetaddr_notifier(&g_dev_notifier);
- #endif
for (i = 0; i < NUM_CONCURRENT_IFC; i++) {
/*allocate first ethernet device with perinterface_wlan_t as its private data*/
@@ -1970,9 +1958,7 @@ static void __exit exit_wilc_driver(void)
if ((g_linux_wlan != NULL) && (((g_linux_wlan->strInterfaceInfo[0].wilc_netdev) != NULL)
|| ((g_linux_wlan->strInterfaceInfo[1].wilc_netdev) != NULL))) {
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
unregister_inetaddr_notifier(&g_dev_notifier);
- #endif
for (i = 0; i < NUM_CONCURRENT_IFC; i++)
nic[i] = netdev_priv(g_linux_wlan->strInterfaceInfo[i].wilc_netdev);
@@ -30,18 +30,14 @@ extern int mac_close(struct net_device *ndev);
tstrNetworkInfo astrLastScannedNtwrksShadow[MAX_NUM_SCANNED_NETWORKS_SHADOW];
u32 u32LastScannedNtwrksCountShadow;
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
struct timer_list hDuringIpTimer;
-#endif
struct timer_list hAgingTimer;
static u8 op_ifcs;
extern u8 u8ConnectedSSID[6];
u8 g_wilc_initialized = 1;
extern linux_wlan_t *g_linux_wlan;
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
extern bool g_obtainingIP;
-#endif
#define CHAN2G(_channel, _freq, _flags) { \
.band = IEEE80211_BAND_2GHZ, \
@@ -261,13 +257,11 @@ static void remove_network_from_shadow(unsigned long arg)
}
}
-#ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
static void clear_duringIP(unsigned long arg)
{
PRINT_D(GENERIC_DBG, "GO:IP Obtained , enable scan\n");
g_obtainingIP = false;
}
-#endif
int8_t is_network_in_shadow(tstrNetworkInfo *pstrNetworkInfo, void *pUserVoid)
{
@@ -619,9 +613,7 @@ static void CfgConnectResult(tenuConnDisconnEvent enuConnDisconnEvent,
u16ConnectStatus, GFP_KERNEL); /* TODO: mostafa: u16ConnectStatus to */
/* be replaced by pstrConnectInfo->u16ConnectStatus */
} else if (enuConnDisconnEvent == CONN_DISCONN_EVENT_DISCONN_NOTIF) {
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
g_obtainingIP = false;
- #endif
PRINT_ER("Received MAC_DISCONNECTED from firmware with reason %d on dev [%p]\n",
pstrDisconnectNotifInfo->u16reason, priv->dev);
u8P2Plocalrandom = 0x01;
@@ -2716,11 +2708,9 @@ static int change_virtual_intf(struct wiphy *wiphy, struct net_device *dev,
bWilc_ie = false;
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
g_obtainingIP = false;
del_timer(&hDuringIpTimer);
PRINT_D(GENERIC_DBG, "Changing virtual interface, enable scan\n");
- #endif
/*Set WILC_CHANGING_VIR_IF register to disallow adding futrue keys to CE H/W*/
if (g_ptk_keys_saved && g_gtk_keys_saved) {
Set_machw_change_vir_if(true);
@@ -2927,10 +2917,8 @@ static int change_virtual_intf(struct wiphy *wiphy, struct net_device *dev,
case NL80211_IFTYPE_P2P_GO:
PRINT_D(GENERIC_DBG, "start duringIP timer\n");
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
g_obtainingIP = true;
mod_timer(&hDuringIpTimer, jiffies + msecs_to_jiffies(duringIP_TIME));
- #endif
host_int_set_power_mgmt(priv->hWILCWFIDrv, 0, 0);
/*Delete block ack has to be the latest config packet*/
/*sent before downloading new FW. This is because it blocks on*/
@@ -3610,9 +3598,7 @@ int wilc_init_host_int(struct net_device *net)
priv = wdev_priv(net->ieee80211_ptr);
if (op_ifcs == 0) {
setup_timer(&hAgingTimer, remove_network_from_shadow, 0);
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
setup_timer(&hDuringIpTimer, clear_duringIP, 0);
- #endif
}
op_ifcs++;
if (s32Error < 0) {
@@ -3659,12 +3645,10 @@ int wilc_deinit_host_int(struct net_device *net)
/* Clear the Shadow scan */
clear_shadow_scan(priv);
- #ifdef DISABLE_PWRSAVE_AND_SCAN_DURING_IP
if (op_ifcs == 0) {
PRINT_D(CORECONFIG_DBG, "destroy during ip\n");
del_timer_sync(&hDuringIpTimer);
}
- #endif
if (s32Error)
PRINT_ER("Error while deintializing host interface\n");
The driver will use define DISABLE_PWRSAVE_AND_SCAN_DURING_IP always. So remove the ifdef line and define in Makefile. Signed-off-by: Glen Lee <glen.lee@atmel.com> --- drivers/staging/wilc1000/Makefile | 2 +- drivers/staging/wilc1000/host_interface.c | 22 ---------------------- drivers/staging/wilc1000/linux_wlan.c | 14 -------------- drivers/staging/wilc1000/wilc_wfi_cfgoperations.c | 16 ---------------- 4 files changed, 1 insertion(+), 53 deletions(-)