@@ -382,7 +382,7 @@ ADM8211 WIRELESS DRIVER
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
S: Orphan
-F: drivers/net/wireless/adm8211.*
+F: drivers/net/wireless/admtek/adm8211.*
ADP1653 FLASH CONTROLLER DRIVER
M: Sakari Ailus <sakari.ailus@iki.fi>
@@ -17,6 +17,8 @@ menuconfig WLAN
if WLAN
+source "drivers/net/wireless/admtek/Kconfig"
+
config PCMCIA_RAYCS
tristate "Aviator/Raytheon 2.4GHz wireless support"
depends on PCMCIA
@@ -214,33 +216,6 @@ config USB_NET_RNDIS_WLAN
If you choose to build a module, it'll be called rndis_wlan.
-config ADM8211
- tristate "ADMtek ADM8211 support"
- depends on MAC80211 && PCI
- select CRC32
- select EEPROM_93CX6
- ---help---
- This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
- These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
-
- Xterasys Cardbus XN-2411b
- Blitz NetWave Point PC
- TrendNet 221pc
- Belkin F5D6001
- SMC 2635W
- Linksys WPC11 v1
- Fiberline FL-WL-200X
- 3com Office Connect (3CRSHPW796)
- Corega WLPCIB-11
- SMC 2602W V2 EU
- D-Link DWL-520 Revision C
-
- However, some of these cards have been replaced with other chips
- like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
- the Ralink RT2400 (SMC2635W) without a model number change.
-
- Thanks to Infineon-ADMtek for their support of this driver.
-
source "drivers/net/wireless/realtek/rtl818x/Kconfig"
config MAC80211_HWSIM
@@ -2,6 +2,8 @@
# Makefile for the Linux Wireless network device drivers.
#
+obj-$(CONFIG_WLAN_VENDOR_ADMTEK) += admtek/
+
obj-$(CONFIG_IPW2100) += ipw2x00/
obj-$(CONFIG_IPW2200) += ipw2x00/
@@ -35,8 +37,6 @@ obj-$(CONFIG_LIBERTAS) += libertas/
obj-$(CONFIG_LIBERTAS_THINFIRM) += libertas_tf/
-obj-$(CONFIG_ADM8211) += adm8211.o
-
obj-$(CONFIG_MWL8K) += mwl8k.o
obj-$(CONFIG_IWLWIFI) += iwlwifi/
new file mode 100644
@@ -0,0 +1,41 @@
+config WLAN_VENDOR_ADMTEK
+ bool "ADMtek devices"
+ default y
+ ---help---
+ If you have a wireless card belonging to this class, say Y.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if WLAN_VENDOR_ADMTEK
+
+config ADM8211
+ tristate "ADMtek ADM8211 support"
+ depends on MAC80211 && PCI
+ select CRC32
+ select EEPROM_93CX6
+ ---help---
+ This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
+ These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
+
+ Xterasys Cardbus XN-2411b
+ Blitz NetWave Point PC
+ TrendNet 221pc
+ Belkin F5D6001
+ SMC 2635W
+ Linksys WPC11 v1
+ Fiberline FL-WL-200X
+ 3com Office Connect (3CRSHPW796)
+ Corega WLPCIB-11
+ SMC 2602W V2 EU
+ D-Link DWL-520 Revision C
+
+ However, some of these cards have been replaced with other chips
+ like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
+ the Ralink RT2400 (SMC2635W) without a model number change.
+
+ Thanks to Infineon-ADMtek for their support of this driver.
+
+endif # WLAN_VENDOR_ADMTEK
new file mode 100644
@@ -0,0 +1 @@
+obj-$(CONFIG_ADM8211) += adm8211.o
Signed-off-by: Kalle Valo <kvalo@codeaurora.org> --- MAINTAINERS | 2 +- drivers/net/wireless/Kconfig | 29 ++----------------- drivers/net/wireless/Makefile | 4 +-- drivers/net/wireless/admtek/Kconfig | 41 +++++++++++++++++++++++++++ drivers/net/wireless/admtek/Makefile | 1 + drivers/net/wireless/{ => admtek}/adm8211.c | 0 drivers/net/wireless/{ => admtek}/adm8211.h | 0 7 files changed, 47 insertions(+), 30 deletions(-) create mode 100644 drivers/net/wireless/admtek/Kconfig create mode 100644 drivers/net/wireless/admtek/Makefile rename drivers/net/wireless/{ => admtek}/adm8211.c (100%) rename drivers/net/wireless/{ => admtek}/adm8211.h (100%) diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/admtek/adm8211.c similarity index 100% rename from drivers/net/wireless/adm8211.c rename to drivers/net/wireless/admtek/adm8211.c diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/admtek/adm8211.h similarity index 100% rename from drivers/net/wireless/adm8211.h rename to drivers/net/wireless/admtek/adm8211.h