@@ -176,62 +176,62 @@ void vnt_init_bands(struct vnt_private *priv)
*/
bool set_channel(void *pDeviceHandler, struct ieee80211_channel *ch)
{
- struct vnt_private *pDevice = pDeviceHandler;
+ struct vnt_private *priv = pDeviceHandler;
bool bResult = true;
- if (pDevice->byCurrentCh == ch->hw_value)
+ if (priv->byCurrentCh == ch->hw_value)
return bResult;
/* Set VGA to max sensitivity */
- if (pDevice->bUpdateBBVGA &&
- pDevice->byBBVGACurrent != pDevice->abyBBVGA[0]) {
- pDevice->byBBVGACurrent = pDevice->abyBBVGA[0];
+ if (priv->bUpdateBBVGA &&
+ priv->byBBVGACurrent != priv->abyBBVGA[0]) {
+ priv->byBBVGACurrent = priv->abyBBVGA[0];
- BBvSetVGAGainOffset(pDevice, pDevice->byBBVGACurrent);
+ BBvSetVGAGainOffset(priv, priv->byBBVGACurrent);
}
/* clear NAV */
- MACvRegBitsOn(pDevice->PortOffset, MAC_REG_MACCR, MACCR_CLRNAV);
+ MACvRegBitsOn(priv->PortOffset, MAC_REG_MACCR, MACCR_CLRNAV);
/* TX_PE will reserve 3 us for MAX2829 A mode only,
it is for better TX throughput */
- if (pDevice->byRFType == RF_AIROHA7230)
- RFbAL7230SelectChannelPostProcess(pDevice, pDevice->byCurrentCh,
+ if (priv->byRFType == RF_AIROHA7230)
+ RFbAL7230SelectChannelPostProcess(priv, priv->byCurrentCh,
ch->hw_value);
- pDevice->byCurrentCh = ch->hw_value;
- bResult &= RFbSelectChannel(pDevice, pDevice->byRFType,
+ priv->byCurrentCh = ch->hw_value;
+ bResult &= RFbSelectChannel(priv, priv->byRFType,
ch->hw_value);
/* Init Synthesizer Table */
- if (pDevice->bEnablePSMode)
- RFvWriteWakeProgSyn(pDevice, pDevice->byRFType, ch->hw_value);
+ if (priv->bEnablePSMode)
+ RFvWriteWakeProgSyn(priv, priv->byRFType, ch->hw_value);
- BBvSoftwareReset(pDevice);
+ BBvSoftwareReset(priv);
- if (pDevice->byLocalID > REV_ID_VT3253_B1) {
+ if (priv->byLocalID > REV_ID_VT3253_B1) {
unsigned long flags;
- spin_lock_irqsave(&pDevice->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
/* set HW default power register */
- MACvSelectPage1(pDevice->PortOffset);
- RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
- VNSvOutPortB(pDevice->PortOffset + MAC_REG_PWRCCK,
- pDevice->byCurPwr);
- RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
- VNSvOutPortB(pDevice->PortOffset + MAC_REG_PWROFDM,
- pDevice->byCurPwr);
- MACvSelectPage0(pDevice->PortOffset);
-
- spin_unlock_irqrestore(&pDevice->lock, flags);
+ MACvSelectPage1(priv->PortOffset);
+ RFbSetPower(priv, RATE_1M, priv->byCurrentCh);
+ VNSvOutPortB(priv->PortOffset + MAC_REG_PWRCCK,
+ priv->byCurPwr);
+ RFbSetPower(priv, RATE_6M, priv->byCurrentCh);
+ VNSvOutPortB(priv->PortOffset + MAC_REG_PWROFDM,
+ priv->byCurPwr);
+ MACvSelectPage0(priv->PortOffset);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
}
- if (pDevice->byBBType == BB_TYPE_11B)
- RFbSetPower(pDevice, RATE_1M, pDevice->byCurrentCh);
+ if (priv->byBBType == BB_TYPE_11B)
+ RFbSetPower(priv, RATE_1M, priv->byCurrentCh);
else
- RFbSetPower(pDevice, RATE_6M, pDevice->byCurrentCh);
+ RFbSetPower(priv, RATE_6M, priv->byCurrentCh);
return bResult;
}
Removing camel case. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> --- drivers/staging/vt6655/channel.c | 58 ++++++++++++++++++++-------------------- 1 file changed, 29 insertions(+), 29 deletions(-)