@@ -4,7 +4,6 @@ ccflags-y += -DFIRMWARE_1002=\"atmel/wilc1002_firmware.bin\" \
-DFIRMWARE_1003=\"atmel/wilc1003_firmware.bin\"
ccflags-y += -I$(src)/ -DWILC_ASIC_A0 -DWILC_DEBUGFS
-#ccflags-y += -DTCP_ACK_FILTER
wilc1000-objs := wilc_wfi_cfgoperations.o linux_wlan.o linux_mon.o \
wilc_msgqueue.o \
@@ -36,8 +36,7 @@ static inline void release_bus(struct wilc *wilc, BUS_RELEASE_T release)
mutex_unlock(&wilc->hif_cs);
}
-#ifdef TCP_ACK_FILTER
-static void wilc_wlan_txq_remove(struct txq_entry_t *tqe)
+static void wilc_wlan_txq_remove(struct wilc *wilc, struct txq_entry_t *tqe)
{
if (tqe == wilc->txq_head) {
@@ -54,7 +53,6 @@ static void wilc_wlan_txq_remove(struct txq_entry_t *tqe)
}
wilc->txq_entries -= 1;
}
-#endif
static struct txq_entry_t *
wilc_wlan_txq_remove_from_head(struct net_device *dev)
@@ -146,7 +144,6 @@ static int wilc_wlan_txq_add_to_head(struct wilc *wilc, struct txq_entry_t *tqe)
return 0;
}
-#ifdef TCP_ACK_FILTER
struct ack_session_info;
struct ack_session_info {
u32 seq_num;
@@ -308,7 +305,7 @@ static int wilc_wlan_txq_filter_dup_tcp_ack(struct net_device *dev)
pending_acks_info[i].ack_num);
tqe = pending_acks_info[i].txqe;
if (tqe) {
- wilc_wlan_txq_remove(tqe);
+ wilc_wlan_txq_remove(wilc, tqe);
tqe->status = 1;
if (tqe->tx_complete_func)
tqe->tx_complete_func(tqe->priv,
@@ -335,7 +332,6 @@ static int wilc_wlan_txq_filter_dup_tcp_ack(struct net_device *dev)
return 1;
}
-#endif
static bool enabled = false;
@@ -344,12 +340,10 @@ void wilc_enable_tcp_ack_filter(bool value)
enabled = value;
}
-#ifdef TCP_ACK_FILTER
static bool is_tcp_ack_filter_enabled(void)
{
return enabled;
}
-#endif
static int wilc_wlan_txq_add_cfg_pkt(struct wilc *wilc, u8 *buffer, u32 buffer_size)
{
@@ -373,9 +367,7 @@ static int wilc_wlan_txq_add_cfg_pkt(struct wilc *wilc, u8 *buffer, u32 buffer_s
tqe->buffer_size = buffer_size;
tqe->tx_complete_func = NULL;
tqe->priv = NULL;
-#ifdef TCP_ACK_FILTER
tqe->tcp_pending_ack_idx = NOT_TCP_ACK;
-#endif
PRINT_D(TX_DBG, "Adding the config packet at the Queue tail\n");
if (wilc_wlan_txq_add_to_head(wilc, tqe))
@@ -406,11 +398,9 @@ int wilc_wlan_txq_add_net_pkt(struct net_device *dev, void *priv, u8 *buffer,
tqe->priv = priv;
PRINT_D(TX_DBG, "Adding mgmt packet at the Queue tail\n");
-#ifdef TCP_ACK_FILTER
tqe->tcp_pending_ack_idx = NOT_TCP_ACK;
if (is_tcp_ack_filter_enabled())
tcp_process(dev, tqe);
-#endif
wilc_wlan_txq_add_to_tail(dev, tqe);
return wilc->txq_entries;
}
@@ -436,9 +426,7 @@ int wilc_wlan_txq_add_mgmt_pkt(struct net_device *dev, void *priv, u8 *buffer,
tqe->buffer_size = buffer_size;
tqe->tx_complete_func = func;
tqe->priv = priv;
-#ifdef TCP_ACK_FILTER
tqe->tcp_pending_ack_idx = NOT_TCP_ACK;
-#endif
PRINT_D(TX_DBG, "Adding Network packet at the Queue tail\n");
wilc_wlan_txq_add_to_tail(dev, tqe);
return 1;
@@ -643,9 +631,7 @@ int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count)
wilc_lock_timeout(wilc, &wilc->txq_add_to_head_cs,
CFG_PKTS_TIMEOUT);
-#ifdef TCP_ACK_FILTER
wilc_wlan_txq_filter_dup_tcp_ack(dev);
-#endif
PRINT_D(TX_DBG, "Getting the head of the TxQ\n");
tqe = wilc_wlan_txq_get_first(wilc);
i = 0;
@@ -829,10 +815,8 @@ int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count)
if (tqe->tx_complete_func)
tqe->tx_complete_func(tqe->priv,
tqe->status);
- #ifdef TCP_ACK_FILTER
if (tqe->tcp_pending_ack_idx != NOT_TCP_ACK)
pending_acks_info[tqe->tcp_pending_ack_idx].txqe = NULL;
- #endif
kfree(tqe);
} else {
break;
@@ -1564,9 +1548,7 @@ int wilc_wlan_init(struct net_device *dev)
ret = -EIO;
goto _fail_;
}
-#ifdef TCP_ACK_FILTER
init_tcp_tracking();
-#endif
return 1;
This patch removes define TCP_ACK_FILTER and use it's feature codes. Add argument wilc to wilc_wlan_txq_remove because compile error happens. Signed-off-by: Glen Lee <glen.lee@atmel.com> --- drivers/staging/wilc1000/Makefile | 1 - drivers/staging/wilc1000/wilc_wlan.c | 22 ++-------------------- 2 files changed, 2 insertions(+), 21 deletions(-)