@@ -522,6 +522,7 @@ static inline void chip_allow_sleep(struct wilc *wilc)
wilc->hif_func->hif_read_reg(wilc, 0xf0, ®);
wilc->hif_func->hif_write_reg(wilc, 0xf0, reg & ~BIT(0));
+ wilc->hif_func->hif_write_reg(wilc, 0xfa, 0);
}
static inline void chip_wakeup(struct wilc *wilc)
@@ -543,6 +544,8 @@ static inline void chip_wakeup(struct wilc *wilc)
} while (wilc_get_chipid(wilc, true) == 0);
} else if ((wilc->io_type & 0x1) == HIF_SDIO) {
+ wilc->hif_func->hif_write_reg(wilc, 0xfa, 1);
+ udelay(200);
wilc->hif_func->hif_read_reg(wilc, 0xf0, ®);
do {
wilc->hif_func->hif_write_reg(wilc, 0xf0,
@@ -567,11 +570,7 @@ static inline void chip_wakeup(struct wilc *wilc)
}
if (chip_ps_state == CHIP_SLEEPING_MANUAL) {
- wilc->hif_func->hif_read_reg(wilc, 0x1C0C, ®);
- reg &= ~BIT(0);
- wilc->hif_func->hif_write_reg(wilc, 0x1C0C, reg);
-
- if (wilc_get_chipid(wilc, false) >= 0x1002b0) {
+ if (wilc_get_chipid(wilc, false) < 0x1002b0) {
u32 val32;
wilc->hif_func->hif_read_reg(wilc, 0x1e1c, &val32);
@@ -599,6 +598,20 @@ void wilc_chip_sleep_manually(struct wilc *wilc)
release_bus(wilc, RELEASE_ONLY);
}
+void host_wakeup_notify(struct wilc *wilc)
+{
+ acquire_bus(wilc, ACQUIRE_ONLY);
+ wilc->hif_func->hif_write_reg(wilc, 0x10b0, 1);
+ release_bus(wilc, RELEASE_ONLY);
+}
+
+void host_sleep_notify(struct wilc *wilc)
+{
+ acquire_bus(wilc, ACQUIRE_ONLY);
+ wilc->hif_func->hif_write_reg(wilc, 0x10ac, 1);
+ release_bus(wilc, RELEASE_ONLY);
+}
+
int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count)
{
int i, entries = 0;
@@ -701,9 +714,6 @@ int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count)
break;
}
PRINT_WRN(GENERIC_DBG, "[wilc txq]: warn, vmm table not clear yet, wait...\n");
- release_bus(wilc, RELEASE_ALLOW_SLEEP);
- usleep_range(3000, 3000);
- acquire_bus(wilc, ACQUIRE_AND_WAKEUP);
}
} while (!wilc->quit);
@@ -736,9 +746,6 @@ int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count)
break;
} else {
release_bus(wilc, RELEASE_ALLOW_SLEEP);
- usleep_range(3000, 3000);
- acquire_bus(wilc, ACQUIRE_AND_WAKEUP);
- PRINT_WRN(GENERIC_DBG, "Can't get VMM entery - reg = %2x\n", reg);
}
} while (--timeout);
if (timeout <= 0) {
@@ -1156,7 +1163,7 @@ int wilc_wlan_start(struct wilc *wilc)
#ifdef WILC_EXT_PA_INV_TX_RX
reg |= WILC_HAVE_EXT_PA_INV_TX_RX;
#endif
-
+ reg |= WILC_HAVE_USE_IRQ_AS_HOST_WAKE;
reg |= WILC_HAVE_LEGACY_RF_SETTINGS;
#ifdef XTAL_24
reg |= WILC_HAVE_XTAL_24;
@@ -106,6 +106,7 @@
#define WILC_HAVE_LEGACY_RF_SETTINGS BIT(5)
#define WILC_HAVE_XTAL_24 BIT(6)
#define WILC_HAVE_DISABLE_WILC_UART BIT(7)
+#define WILC_HAVE_USE_IRQ_AS_HOST_WAKE BIT(8)
/********************************************
*
@@ -294,7 +295,8 @@ int wilc_mac_close(struct net_device *ndev);
int wilc_wlan_set_bssid(struct net_device *wilc_netdev, u8 *pBSSID);
void WILC_WFI_p2p_rx(struct net_device *dev, u8 *buff, u32 size);
-
+void host_wakeup_notify(struct wilc *wilc);
+void host_sleep_notify(struct wilc *wilc);
extern bool wilc_enable_ps;
#endif
wilc supports suspend/resume functionality. Introduce new sleep and wakeup functions and remove old codes since that will be handled in the new functions. Signed-off-by: Glen Lee <glen.lee@atmel.com> --- drivers/staging/wilc1000/wilc_wlan.c | 31 +++++++++++++++++++------------ drivers/staging/wilc1000/wilc_wlan.h | 4 +++- 2 files changed, 22 insertions(+), 13 deletions(-)