diff mbox

[19/21] ath10k: Enable adhoc mode for CT firmware.

Message ID 1462835475-11079-20-git-send-email-greearb@candelatech.com (mailing list archive)
State Not Applicable
Delegated to: Kalle Valo
Headers show

Commit Message

Ben Greear May 9, 2016, 11:11 p.m. UTC 
From: Ben Greear <greearb@candelatech.com>

CT firmware can support IBSS mode, so allow users to configure this.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---
 drivers/net/wireless/ath/ath10k/mac.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index f1bfb3a..3fc9006 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -7482,6 +7482,10 @@  static const struct ieee80211_iface_limit ath10k_10x_ct_if_limits[] = {
 	.max	= 7,
 	.types	= BIT(NL80211_IFTYPE_AP)
 	},
+	{
+	.max	= 1,
+	.types	= BIT(NL80211_IFTYPE_ADHOC)
+	},
 };
 
 static const struct ieee80211_iface_combination ath10k_if_comb[] = {
@@ -7862,6 +7866,7 @@  int ath10k_mac_register(struct ath10k *ar)
 			ar->hw->wiphy->iface_combinations = ath10k_10x_ct_if_comb;
 			ar->hw->wiphy->n_iface_combinations =
 				ARRAY_SIZE(ath10k_10x_ct_if_comb);
+			ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC);
 		} else {
 			ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb;
 			ar->hw->wiphy->n_iface_combinations =