@@ -1744,71 +1744,26 @@ static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- struct device *dev = &rtl_pcipriv(hw)->dev.pdev->dev;
- u16 i, usvalue;
- u8 hwinfo[HWSET_MAX_SIZE];
- u16 eeprom_id;
- unsigned long flags;
+ int params[] = {RTL8190_EEPROM_ID, EEPROM_VID, EEPROM_DID,
+ EEPROM_SVID, EEPROM_SMID, EEPROM_MAC_ADDR_MAC0_92D,
+ EEPROM_CHANNEL_PLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID,
+ COUNTRY_CODE_WORLD_WIDE_13};
+ int i;
+ u16 usvalue;
+ u8 *hwinfo;
- switch (rtlefuse->epromtype) {
- case EEPROM_BOOT_EFUSE:
- spin_lock_irqsave(&globalmutex_for_power_and_efuse, flags);
- rtl_efuse_shadow_map_update(hw);
- _rtl92de_efuse_update_chip_version(hw);
- spin_unlock_irqrestore(&globalmutex_for_power_and_efuse, flags);
- break;
- case EEPROM_93C46:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "RTL819X Not boot from eeprom, check it !!\n");
- return;
- default:
- dev_warn(dev, "no efuse data\n");
+ hwinfo = kzalloc(HWSET_MAX_SIZE, GFP_KERNEL);
+ if (!hwinfo)
return;
- }
-
- memcpy(hwinfo, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE);
- RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "MAP",
- hwinfo, HWSET_MAX_SIZE);
- eeprom_id = *((u16 *)&hwinfo[0]);
- if (eeprom_id != RTL8190_EEPROM_ID) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
- "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
- rtlefuse->autoload_failflag = true;
- } else {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
- rtlefuse->autoload_failflag = false;
- }
- if (rtlefuse->autoload_failflag) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "RTL819X Not boot from eeprom, check it !!\n");
+ if (rtl_get_hwinfo(hw, rtlpriv, HWSET_MAX_SIZE, hwinfo, params));
return;
- }
- rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID];
- _rtl92de_read_macphymode_and_bandtype(hw, hwinfo);
- /* VID, DID SE 0xA-D */
- rtlefuse->eeprom_vid = *(u16 *)&hwinfo[EEPROM_VID];
- rtlefuse->eeprom_did = *(u16 *)&hwinfo[EEPROM_DID];
- rtlefuse->eeprom_svid = *(u16 *)&hwinfo[EEPROM_SVID];
- rtlefuse->eeprom_smid = *(u16 *)&hwinfo[EEPROM_SMID];
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROMId = 0x%4x\n", eeprom_id);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid);
+ _rtl92de_efuse_update_chip_version(hw);
+ _rtl92de_read_macphymode_and_bandtype(hw, hwinfo);
- /* Read Permanent MAC address */
- if (rtlhal->interfaceindex == 0) {
- for (i = 0; i < 6; i += 2) {
- usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC0_92D + i];
- *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
- }
- } else {
+ /* Read Permanent MAC address for 2nd interface */
+ if (rtlhal->interfaceindex != 0) {
for (i = 0; i < 6; i += 2) {
usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR_MAC1_92D + i];
*((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
@@ -1834,10 +1789,8 @@ static void _rtl92de_read_adapter_info(struct ieee80211_hw *hw)
rtlefuse->channel_plan = COUNTRY_CODE_FCC;
break;
}
- rtlefuse->eeprom_version = *(u16 *)&hwinfo[EEPROM_VERSION];
rtlefuse->txpwr_fromeprom = true;
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
- "EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid);
+ kfree(hwinfo);
}
void rtl92de_read_eeprom_info(struct ieee80211_hw *hw)
The driver for RTL8192DE chips is converted to use the common routine for getting the hardware information. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Arnd Bergmann <arnd@arndb.de> --- .../net/wireless/realtek/rtlwifi/rtl8192de/hw.c | 77 +++++----------------- 1 file changed, 15 insertions(+), 62 deletions(-)