@@ -347,56 +347,24 @@ static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
- u16 i, usvalue;
- u8 hwinfo[HWSET_MAX_SIZE] = {0};
- u16 eeprom_id;
-
- switch (rtlefuse->epromtype) {
- case EEPROM_BOOT_EFUSE:
- rtl_efuse_shadow_map_update(hw);
- break;
-
- case EEPROM_93C46:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "RTL819X Not boot from eeprom, check it !!\n");
+ int params[] = {RTL8190_EEPROM_ID, EEPROM_VID, EEPROM_DID,
+ EEPROM_SVID, EEPROM_SMID, EEPROM_MAC_ADDR,
+ EEPROM_CHANNELPLAN, EEPROM_VERSION, EEPROM_CUSTOMER_ID,
+ 0};
+ u8 *hwinfo;
+
+ hwinfo = kzalloc(HWSET_MAX_SIZE, GFP_KERNEL);
+ if (!hwinfo)
return;
- default:
- pr_warn("rtl92cu: no efuse data\n\n");
- return;
- }
- memcpy(hwinfo, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0], HWSET_MAX_SIZE);
- RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_LOUD, "MAP",
- hwinfo, HWSET_MAX_SIZE);
- eeprom_id = le16_to_cpu(*((__le16 *)&hwinfo[0]));
- if (eeprom_id != RTL8190_EEPROM_ID) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "EEPROM ID(%#x) is invalid!!\n", eeprom_id);
- rtlefuse->autoload_failflag = true;
- } else {
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n");
- rtlefuse->autoload_failflag = false;
- }
- if (rtlefuse->autoload_failflag)
- return;
- for (i = 0; i < 6; i += 2) {
- usvalue = *(u16 *)&hwinfo[EEPROM_MAC_ADDR + i];
- *((u16 *) (&rtlefuse->dev_addr[i])) = usvalue;
- }
- pr_info("MAC address: %pM\n", rtlefuse->dev_addr);
+ if (rtl_get_hwinfo(hw, rtlpriv, HWSET_MAX_SIZE, hwinfo, params))
+ goto exit;
+
_rtl92cu_read_txpower_info_from_hwpg(hw,
rtlefuse->autoload_failflag, hwinfo);
- rtlefuse->eeprom_vid = le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_VID]);
- rtlefuse->eeprom_did = le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_DID]);
- RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, " VID = 0x%02x PID = 0x%02x\n",
- rtlefuse->eeprom_vid, rtlefuse->eeprom_did);
- rtlefuse->eeprom_channelplan = hwinfo[EEPROM_CHANNELPLAN];
- rtlefuse->eeprom_version =
- le16_to_cpu(*(__le16 *)&hwinfo[EEPROM_VERSION]);
+ _rtl92cu_read_board_type(hw, hwinfo);
+
rtlefuse->txpwr_fromeprom = true;
- rtlefuse->eeprom_oemid = hwinfo[EEPROM_CUSTOMER_ID];
- RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "EEPROM Customer ID: 0x%2x\n",
- rtlefuse->eeprom_oemid);
if (rtlhal->oem_id == RT_CID_DEFAULT) {
switch (rtlefuse->eeprom_oemid) {
case EEPROM_CID_DEFAULT:
@@ -422,7 +390,8 @@ static void _rtl92cu_read_adapter_info(struct ieee80211_hw *hw)
break;
}
}
- _rtl92cu_read_board_type(hw, hwinfo);
+exit:
+ kfree(hwinfo);
}
static void _rtl92cu_hal_customized_behavior(struct ieee80211_hw *hw)
The driver for RTL8192CU chips is converted to use the common routine for getting the hardware information. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Arnd Bergmann <arnd@arndb.de> --- V2 - Fixes bug found after V1 was submitted. V3 - No changes. This patch requires ("rtlwifi: Add missing newlines to RT_TRACE calls") submitted by Joe Perches. --- .../net/wireless/realtek/rtlwifi/rtl8192cu/hw.c | 61 ++++++---------------- 1 file changed, 15 insertions(+), 46 deletions(-)