diff mbox

mac80211: Fix invalid 'info' access in xmit-fast.

Message ID 1483123790-14412-1-git-send-email-greearb@candelatech.com (mailing list archive)
State Superseded
Delegated to: Johannes Berg
Headers show

Commit Message

Ben Greear Dec. 30, 2016, 6:49 p.m. UTC
From: Ben Greear <greearb@candelatech.com>

ieee80211_xmit_fast assigns info from the passed-in
skb, but then later it also checks for skb_shared(skb),
and may create a new skb based on that check.

But, the code did not re-assign 'info', so it pointed into
the old shared skb.  This leads to all sorts of problems,
most obviously crashes since the new skb's info->hw_queue is not
properly initialized.

Bug was seen by sending pktgen packets on a bridge that
had an AP network interface in it.  hw-queue was out of
range, which made it crash like this:

BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffffa0ad4672>] ieee80211_tx_frags+0x232/0x4c0 [mac80211]
PGD 0
Oops: 0002 [#1] PREEMPT SMP
CPU: 0 PID: 1512 Comm: kpktgend_0 Tainted: G           O    4.7.10+ #24
Hardware name: To be filled by O.E.M. To be filled by O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013
task: ffff8802132f3a00 ti: ffff8800362ac000 task.ti: ffff8800362ac000
RIP: 0010:[<ffffffffa0ad4672>]  [<ffffffffa0ad4672>] ieee80211_tx_frags+0x232/0x4c0 [mac80211]
RSP: 0018:ffff8800362afa28  EFLAGS: 00010086
RAX: ffff8802130a22c0 RBX: ffff8802130a13a0 RCX: ffff880035ef2200
RDX: ffff880035ef2200 RSI: 0000000000000292 RDI: 0000000000000000
RBP: ffff8800362afa90 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000088 R11: 0000000000000001 R12: ffff880035ef2200
R13: ffff880035dabb90 R14: ffff8800362afb18 R15: 0000000000000cc0
FS:  0000000000000000(0000) GS:ffff88021e200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000001e06000 CR4: 00000000001406f0
Stack:
 0000000000000292 ffff880035daa880 ffff8802130a0b20 ffff8800d4f01808
 00ff8800362afaa0 ffff8800362afb18 ffff8802130a13c0 ffff88021e20db68
 ffff880035daa880 ffff8800362afb18 ffff880035ef2200 ffff88020f6ca300
Call Trace:
 [<ffffffffa0ad9f63>] __ieee80211_subif_start_xmit+0xc13/0xc30 [mac80211]
 [<ffffffff8113d2c5>] ? find_busiest_group+0x35/0x4a0
 [<ffffffffa0ad9f8b>] ieee80211_subif_start_xmit+0xb/0x10 [mac80211]
 [<ffffffff8177d40b>] dev_hard_start_xmit+0x9b/0x220
 [<ffffffff817a3716>] sch_direct_xmit+0xd6/0x1a0
 [<ffffffff8177da8e>] __dev_queue_xmit+0x3be/0x6c0
 [<ffffffff81127f43>] ? finish_task_switch+0x73/0x1f0
 [<ffffffff8177dd9d>] dev_queue_xmit+0xd/0x10
 [<ffffffffa0b5fe85>] br_dev_queue_push_xmit+0x75/0x140 [bridge]
 [<ffffffffa0b5ffc9>] br_forward_finish+0x29/0xa0 [bridge]
 [<ffffffff8116db83>] ? del_timer_sync+0x43/0x50
 [<ffffffffa0b600a2>] __br_deliver+0x62/0x130 [bridge]
 [<ffffffff81175937>] ? __getnstimeofday64+0x37/0xd0
 [<ffffffff811759d9>] ? getnstimeofday64+0x9/0x30
 [<ffffffffa0b605b6>] br_deliver+0x56/0x60 [bridge]
 [<ffffffffa0b5d472>] br_dev_xmit+0x1c2/0x250 [bridge]
 [<ffffffffa137aa1c>] pktgen_thread_worker+0x174c/0x2471 [pktgen]
 [<ffffffff8185087a>] ? __schedule+0x30a/0x7c0
 [<ffffffff811446e0>] ? wake_atomic_t_function+0x60/0x60
 [<ffffffffa13792d0>] ? pktgen_rem_all_ifs+0x80/0x80 [pktgen]
 [<ffffffff81121c14>] kthread+0xc4/0xe0
 [<ffffffff818551df>] ret_from_fork+0x1f/0x40
 [<ffffffff81121b50>] ? kthread_worker_fn+0x180/0x180

Fix this by re-assigning info after creating new one.

Signed-off-by: Ben Greear <greearb@candelatech.com>
---

This patch is against 4.7.10+

 net/mac80211/tx.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Johannes Berg Jan. 2, 2017, 10:24 a.m. UTC | #1
On Fri, 2016-12-30 at 10:49 -0800, greearb@candelatech.com wrote:
> From: Ben Greear <greearb@candelatech.com>
> 
> ieee80211_xmit_fast assigns info from the passed-in
> skb, but then later it also checks for skb_shared(skb),
> and may create a new skb based on that check.
> 
> But, the code did not re-assign 'info', so it pointed into
> the old shared skb.  This leads to all sorts of problems,
> most obviously crashes since the new skb's info->hw_queue is not
> properly initialized.
> 
> Bug was seen by sending pktgen packets on a bridge that
> had an AP network interface in it.  hw-queue was out of
> range, which made it crash like this:
> 
> BUG: unable to handle kernel NULL pointer dereference
> at           (null)
> IP: [<ffffffffa0ad4672>] ieee80211_tx_frags+0x232/0x4c0 [mac80211]
> PGD 0
> Oops: 0002 [#1] PREEMPT SMP
> CPU: 0 PID: 1512 Comm: kpktgend_0 Tainted: G           O    4.7.10+
> #24
> Hardware name: To be filled by O.E.M. To be filled by
> O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013
> task: ffff8802132f3a00 ti: ffff8800362ac000 task.ti: ffff8800362ac000
> RIP: 0010:[<ffffffffa0ad4672>]  [<ffffffffa0ad4672>]
> ieee80211_tx_frags+0x232/0x4c0 [mac80211]
> RSP: 0018:ffff8800362afa28  EFLAGS: 00010086
> RAX: ffff8802130a22c0 RBX: ffff8802130a13a0 RCX: ffff880035ef2200
> RDX: ffff880035ef2200 RSI: 0000000000000292 RDI: 0000000000000000
> RBP: ffff8800362afa90 R08: 0000000000000000 R09: 0000000000000000
> R10: 0000000000000088 R11: 0000000000000001 R12: ffff880035ef2200
> R13: ffff880035dabb90 R14: ffff8800362afb18 R15: 0000000000000cc0
> FS:  0000000000000000(0000) GS:ffff88021e200000(0000)
> knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: 0000000000000000 CR3: 0000000001e06000 CR4: 00000000001406f0
> Stack:
>  0000000000000292 ffff880035daa880 ffff8802130a0b20 ffff8800d4f01808
>  00ff8800362afaa0 ffff8800362afb18 ffff8802130a13c0 ffff88021e20db68
>  ffff880035daa880 ffff8800362afb18 ffff880035ef2200 ffff88020f6ca300
> Call Trace:
>  [<ffffffffa0ad9f63>] __ieee80211_subif_start_xmit+0xc13/0xc30
> [mac80211]
>  [<ffffffff8113d2c5>] ? find_busiest_group+0x35/0x4a0
>  [<ffffffffa0ad9f8b>] ieee80211_subif_start_xmit+0xb/0x10 [mac80211]
>  [<ffffffff8177d40b>] dev_hard_start_xmit+0x9b/0x220
>  [<ffffffff817a3716>] sch_direct_xmit+0xd6/0x1a0
>  [<ffffffff8177da8e>] __dev_queue_xmit+0x3be/0x6c0
>  [<ffffffff81127f43>] ? finish_task_switch+0x73/0x1f0
>  [<ffffffff8177dd9d>] dev_queue_xmit+0xd/0x10
>  [<ffffffffa0b5fe85>] br_dev_queue_push_xmit+0x75/0x140 [bridge]
>  [<ffffffffa0b5ffc9>] br_forward_finish+0x29/0xa0 [bridge]
>  [<ffffffff8116db83>] ? del_timer_sync+0x43/0x50
>  [<ffffffffa0b600a2>] __br_deliver+0x62/0x130 [bridge]
>  [<ffffffff81175937>] ? __getnstimeofday64+0x37/0xd0
>  [<ffffffff811759d9>] ? getnstimeofday64+0x9/0x30
>  [<ffffffffa0b605b6>] br_deliver+0x56/0x60 [bridge]
>  [<ffffffffa0b5d472>] br_dev_xmit+0x1c2/0x250 [bridge]
>  [<ffffffffa137aa1c>] pktgen_thread_worker+0x174c/0x2471 [pktgen]
>  [<ffffffff8185087a>] ? __schedule+0x30a/0x7c0
>  [<ffffffff811446e0>] ? wake_atomic_t_function+0x60/0x60
>  [<ffffffffa13792d0>] ? pktgen_rem_all_ifs+0x80/0x80 [pktgen]
>  [<ffffffff81121c14>] kthread+0xc4/0xe0
>  [<ffffffff818551df>] ret_from_fork+0x1f/0x40
>  [<ffffffff81121b50>] ? kthread_worker_fn+0x180/0x180
> 
> Fix this by re-assigning info after creating new one.
> 
> Signed-off-by: Ben Greear <greearb@candelatech.com>
> ---
> 
> This patch is against 4.7.10+

And thus didn't apply - I've replaced it with my own patch which I'll
send out in a moment

johannes
Ben Greear Jan. 3, 2017, 3:04 a.m. UTC | #2
On 01/02/2017 02:24 AM, Johannes Berg wrote:
> On Fri, 2016-12-30 at 10:49 -0800, greearb@candelatech.com wrote:
>> From: Ben Greear <greearb@candelatech.com>
>>
>> ieee80211_xmit_fast assigns info from the passed-in
>> skb, but then later it also checks for skb_shared(skb),
>> and may create a new skb based on that check.
>>
>> But, the code did not re-assign 'info', so it pointed into
>> the old shared skb.  This leads to all sorts of problems,
>> most obviously crashes since the new skb's info->hw_queue is not
>> properly initialized.
>>
>> Bug was seen by sending pktgen packets on a bridge that
>> had an AP network interface in it.  hw-queue was out of
>> range, which made it crash like this:
>>
>> BUG: unable to handle kernel NULL pointer dereference
>> at           (null)
>> IP: [<ffffffffa0ad4672>] ieee80211_tx_frags+0x232/0x4c0 [mac80211]
>> PGD 0
>> Oops: 0002 [#1] PREEMPT SMP
>> CPU: 0 PID: 1512 Comm: kpktgend_0 Tainted: G           O    4.7.10+
>> #24
>> Hardware name: To be filled by O.E.M. To be filled by
>> O.E.M./ChiefRiver, BIOS 4.6.5 06/07/2013
>> task: ffff8802132f3a00 ti: ffff8800362ac000 task.ti: ffff8800362ac000
>> RIP: 0010:[<ffffffffa0ad4672>]  [<ffffffffa0ad4672>]
>> ieee80211_tx_frags+0x232/0x4c0 [mac80211]
>> RSP: 0018:ffff8800362afa28  EFLAGS: 00010086
>> RAX: ffff8802130a22c0 RBX: ffff8802130a13a0 RCX: ffff880035ef2200
>> RDX: ffff880035ef2200 RSI: 0000000000000292 RDI: 0000000000000000
>> RBP: ffff8800362afa90 R08: 0000000000000000 R09: 0000000000000000
>> R10: 0000000000000088 R11: 0000000000000001 R12: ffff880035ef2200
>> R13: ffff880035dabb90 R14: ffff8800362afb18 R15: 0000000000000cc0
>> FS:  0000000000000000(0000) GS:ffff88021e200000(0000)
>> knlGS:0000000000000000
>> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> CR2: 0000000000000000 CR3: 0000000001e06000 CR4: 00000000001406f0
>> Stack:
>>   0000000000000292 ffff880035daa880 ffff8802130a0b20 ffff8800d4f01808
>>   00ff8800362afaa0 ffff8800362afb18 ffff8802130a13c0 ffff88021e20db68
>>   ffff880035daa880 ffff8800362afb18 ffff880035ef2200 ffff88020f6ca300
>> Call Trace:
>>   [<ffffffffa0ad9f63>] __ieee80211_subif_start_xmit+0xc13/0xc30
>> [mac80211]
>>   [<ffffffff8113d2c5>] ? find_busiest_group+0x35/0x4a0
>>   [<ffffffffa0ad9f8b>] ieee80211_subif_start_xmit+0xb/0x10 [mac80211]
>>   [<ffffffff8177d40b>] dev_hard_start_xmit+0x9b/0x220
>>   [<ffffffff817a3716>] sch_direct_xmit+0xd6/0x1a0
>>   [<ffffffff8177da8e>] __dev_queue_xmit+0x3be/0x6c0
>>   [<ffffffff81127f43>] ? finish_task_switch+0x73/0x1f0
>>   [<ffffffff8177dd9d>] dev_queue_xmit+0xd/0x10
>>   [<ffffffffa0b5fe85>] br_dev_queue_push_xmit+0x75/0x140 [bridge]
>>   [<ffffffffa0b5ffc9>] br_forward_finish+0x29/0xa0 [bridge]
>>   [<ffffffff8116db83>] ? del_timer_sync+0x43/0x50
>>   [<ffffffffa0b600a2>] __br_deliver+0x62/0x130 [bridge]
>>   [<ffffffff81175937>] ? __getnstimeofday64+0x37/0xd0
>>   [<ffffffff811759d9>] ? getnstimeofday64+0x9/0x30
>>   [<ffffffffa0b605b6>] br_deliver+0x56/0x60 [bridge]
>>   [<ffffffffa0b5d472>] br_dev_xmit+0x1c2/0x250 [bridge]
>>   [<ffffffffa137aa1c>] pktgen_thread_worker+0x174c/0x2471 [pktgen]
>>   [<ffffffff8185087a>] ? __schedule+0x30a/0x7c0
>>   [<ffffffff811446e0>] ? wake_atomic_t_function+0x60/0x60
>>   [<ffffffffa13792d0>] ? pktgen_rem_all_ifs+0x80/0x80 [pktgen]
>>   [<ffffffff81121c14>] kthread+0xc4/0xe0
>>   [<ffffffff818551df>] ret_from_fork+0x1f/0x40
>>   [<ffffffff81121b50>] ? kthread_worker_fn+0x180/0x180
>>
>> Fix this by re-assigning info after creating new one.
>>
>> Signed-off-by: Ben Greear <greearb@candelatech.com>
>> ---
>>
>> This patch is against 4.7.10+
>
> And thus didn't apply - I've replaced it with my own patch which I'll
> send out in a moment

Thanks for your patch...  It is cleaner than what I originally wrote,
and I was out the door before I thought to re-write it as you did.

FYI, the same patch applies as far back as 4.4...I didn't look at anything older.

Ben

>
> johannes
>
diff mbox

Patch

diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 0573ab9..3da5f94 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -3081,6 +3081,7 @@  static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata,
 
 		if (!skb)
 			return true;
+		info = IEEE80211_SKB_CB(skb);
 	}
 
 	ieee80211_tx_stats(dev, skb->len + extra_head);