@@ -306,9 +306,17 @@ static int mwifiex_usb_submit_rx_urb(struct urb_context *ctx, int size)
}
}
- usb_fill_bulk_urb(ctx->urb, card->udev,
- usb_rcvbulkpipe(card->udev, ctx->ep), ctx->skb->data,
- size, mwifiex_usb_rx_complete, (void *)ctx);
+ if (card->rx_cmd_ep == ctx->ep &&
+ card->rx_cmd_ep_type == USB_ENDPOINT_XFER_INT)
+ usb_fill_int_urb(ctx->urb, card->udev,
+ usb_rcvintpipe(card->udev, ctx->ep),
+ ctx->skb->data, size, mwifiex_usb_rx_complete,
+ (void *)ctx, card->rx_cmd_interval);
+ else
+ usb_fill_bulk_urb(ctx->urb, card->udev,
+ usb_rcvbulkpipe(card->udev, ctx->ep),
+ ctx->skb->data, size, mwifiex_usb_rx_complete,
+ (void *)ctx);
if (card->rx_cmd_ep == ctx->ep)
atomic_inc(&card->rx_cmd_urb_pending);
@@ -424,10 +432,13 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
epd = &iface_desc->endpoint[i].desc;
if (usb_endpoint_dir_in(epd) &&
usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT &&
- usb_endpoint_xfer_bulk(epd)) {
- pr_debug("info: bulk IN: max pkt size: %d, addr: %d\n",
+ (usb_endpoint_xfer_bulk(epd) ||
+ usb_endpoint_xfer_int(epd))) {
+ card->rx_cmd_ep_type = usb_endpoint_type(epd);
+ card->rx_cmd_interval = epd->bInterval;
+ pr_debug("info: Rx CMD/EVT:: max pkt size: %d, addr: %d, ep_type: %d\n",
le16_to_cpu(epd->wMaxPacketSize),
- epd->bEndpointAddress);
+ epd->bEndpointAddress, card->rx_cmd_ep_type);
card->rx_cmd_ep = usb_endpoint_num(epd);
atomic_set(&card->rx_cmd_urb_pending, 0);
}
@@ -461,10 +472,16 @@ static int mwifiex_usb_probe(struct usb_interface *intf,
}
if (usb_endpoint_dir_out(epd) &&
usb_endpoint_num(epd) == MWIFIEX_USB_EP_CMD_EVENT &&
- usb_endpoint_xfer_bulk(epd)) {
+ (usb_endpoint_xfer_bulk(epd) ||
+ usb_endpoint_xfer_int(epd))) {
+ card->tx_cmd_ep_type = usb_endpoint_type(epd);
+ card->tx_cmd_interval = epd->bInterval;
pr_debug("info: bulk OUT: max pkt size: %d, addr: %d\n",
le16_to_cpu(epd->wMaxPacketSize),
epd->bEndpointAddress);
+ pr_debug("info: Tx CMD:: max pkt size: %d, addr: %d, ep_type: %d\n",
+ le16_to_cpu(epd->wMaxPacketSize),
+ epd->bEndpointAddress, card->tx_cmd_ep_type);
card->tx_cmd_ep = usb_endpoint_num(epd);
atomic_set(&card->tx_cmd_urb_pending, 0);
card->bulk_out_maxpktsize =
@@ -884,9 +901,17 @@ static int mwifiex_usb_host_to_card(struct mwifiex_adapter *adapter, u8 ep,
context->skb = skb;
tx_urb = context->urb;
- usb_fill_bulk_urb(tx_urb, card->udev, usb_sndbulkpipe(card->udev, ep),
- data, skb->len, mwifiex_usb_tx_complete,
- (void *)context);
+ if (ep == card->tx_cmd_ep &&
+ card->tx_cmd_ep_type == USB_ENDPOINT_XFER_INT)
+ usb_fill_int_urb(tx_urb, card->udev,
+ usb_sndintpipe(card->udev, ep), data,
+ skb->len, mwifiex_usb_tx_complete,
+ (void *)context, card->tx_cmd_interval);
+ else
+ usb_fill_bulk_urb(tx_urb, card->udev,
+ usb_sndbulkpipe(card->udev, ep), data,
+ skb->len, mwifiex_usb_tx_complete,
+ (void *)context);
tx_urb->transfer_flags |= URB_ZERO_PACKET;
@@ -90,6 +90,10 @@ struct usb_card_rec {
struct urb_context tx_cmd;
u8 mc_resync_flag;
struct usb_tx_data_port port[MWIFIEX_TX_DATA_PORT];
+ int rx_cmd_ep_type;
+ u8 rx_cmd_interval;
+ int tx_cmd_ep_type;
+ u8 tx_cmd_interval;
};
struct fw_header {
USB firmware added support for sending command response/event through interrupt endpoint, to enhance RX throupghut. Added corresponding changes required to support this feature. Signed-off-by: Ganapathi Bhat <gbhat@marvell.com> --- drivers/net/wireless/marvell/mwifiex/usb.c | 45 +++++++++++++++++++++++------- drivers/net/wireless/marvell/mwifiex/usb.h | 4 +++ 2 files changed, 39 insertions(+), 10 deletions(-)