diff mbox

[PATCHv2,2/2] mac80211: Add support to notify ht/vht opmode modification.

Message ID 1516904493-4310-2-git-send-email-tamizhr@codeaurora.org (mailing list archive)
State Superseded
Delegated to: Johannes Berg
Headers show

Commit Message

Tamizh chelvam Jan. 25, 2018, 6:21 p.m. UTC 
This will add support to send an event to a userspace application
whenever station advertise its ht/vht opmode modification through
an action frame.

Signed-off-by: Tamizh chelvam <tamizhr@codeaurora.org>
---
 net/mac80211/rx.c  | 14 ++++++++++++++
 net/mac80211/vht.c |  9 +++++++++
 2 files changed, 23 insertions(+)

Comments

Johannes Berg Jan. 30, 2018, 7:45 a.m. UTC | #1 
On Thu, 2018-01-25 at 23:51 +0530, Tamizh chelvam wrote:
> 
> +++ b/net/mac80211/vht.c
> @@ -447,6 +447,7 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
>  				  enum nl80211_band band)
>  {
>  	enum ieee80211_sta_rx_bandwidth new_bw;
> +	struct sta_opmode_info sta_opmode;
>  	u32 changed = 0;
>  	u8 nss;
>  
> @@ -460,7 +461,9 @@ u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
>  
>  	if (sta->sta.rx_nss != nss) {
>  		sta->sta.rx_nss = nss;
> +		sta_opmode.rx_nss = nss;
>  		changed |= IEEE80211_RC_NSS_CHANGED;
> +		sta_opmode.changed |= STA_OPMODE_N_SS_CHANGED;

This obviously cannot work properly, please respin.

johannes
diff mbox

Patch

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index fd58061..d1efe8a 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2848,6 +2848,7 @@  static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data *sdata,
 		case WLAN_HT_ACTION_SMPS: {
 			struct ieee80211_supported_band *sband;
 			enum ieee80211_smps_mode smps_mode;
+			struct sta_opmode_info sta_opmode;
 
 			/* convert to HT capability */
 			switch (mgmt->u.action.u.ht_smps.smps_control) {
@@ -2868,17 +2869,24 @@  static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data *sdata,
 			if (rx->sta->sta.smps_mode == smps_mode)
 				goto handled;
 			rx->sta->sta.smps_mode = smps_mode;
+			sta_opmode.smps_mode = smps_mode;
+			sta_opmode.changed = STA_OPMODE_SMPS_MODE_CHANGED;
 
 			sband = rx->local->hw.wiphy->bands[status->band];
 
 			rate_control_rate_update(local, sband, rx->sta,
 						 IEEE80211_RC_SMPS_CHANGED);
+			cfg80211_sta_opmode_change_notify(sdata->dev,
+							  rx->sta->addr,
+							  &sta_opmode,
+							  GFP_KERNEL);
 			goto handled;
 		}
 		case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: {
 			struct ieee80211_supported_band *sband;
 			u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth;
 			enum ieee80211_sta_rx_bandwidth max_bw, new_bw;
+			struct sta_opmode_info sta_opmode;
 
 			/* If it doesn't support 40 MHz it can't change ... */
 			if (!(rx->sta->sta.ht_cap.cap &
@@ -2899,9 +2907,15 @@  static void ieee80211_process_sa_query_req(struct ieee80211_sub_if_data *sdata,
 
 			rx->sta->sta.bandwidth = new_bw;
 			sband = rx->local->hw.wiphy->bands[status->band];
+			sta_opmode.bw = new_bw;
+			sta_opmode.changed = STA_OPMODE_MAX_BW_CHANGED;
 
 			rate_control_rate_update(local, sband, rx->sta,
 						 IEEE80211_RC_BW_CHANGED);
+			cfg80211_sta_opmode_change_notify(sdata->dev,
+							  rx->sta->addr,
+							  &sta_opmode,
+							  GFP_KERNEL);
 			goto handled;
 		}
 		default:
diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c
index b9276ac..5f5db8e 100644
--- a/net/mac80211/vht.c
+++ b/net/mac80211/vht.c
@@ -447,6 +447,7 @@  u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 				  enum nl80211_band band)
 {
 	enum ieee80211_sta_rx_bandwidth new_bw;
+	struct sta_opmode_info sta_opmode;
 	u32 changed = 0;
 	u8 nss;
 
@@ -460,7 +461,9 @@  u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 
 	if (sta->sta.rx_nss != nss) {
 		sta->sta.rx_nss = nss;
+		sta_opmode.rx_nss = nss;
 		changed |= IEEE80211_RC_NSS_CHANGED;
+		sta_opmode.changed |= STA_OPMODE_N_SS_CHANGED;
 	}
 
 	switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) {
@@ -481,9 +484,15 @@  u32 __ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata,
 	new_bw = ieee80211_sta_cur_vht_bw(sta);
 	if (new_bw != sta->sta.bandwidth) {
 		sta->sta.bandwidth = new_bw;
+		sta_opmode.bw = new_bw;
 		changed |= IEEE80211_RC_BW_CHANGED;
+		sta_opmode.changed |= STA_OPMODE_MAX_BW_CHANGED;
 	}
 
+	if (sta_opmode.changed)
+		cfg80211_sta_opmode_change_notify(sdata->dev, sta->addr,
+						  &sta_opmode, GFP_KERNEL);
+
 	return changed;
 }