diff mbox series

[v2,18/19] wil6210: prevent FW download if HW is configured for secured boot

Message ID 1532418280-5849-19-git-send-email-merez@codeaurora.org (mailing list archive)
State Accepted
Commit d554edcd972d46179bf10258379e80f609bb52e5
Delegated to: Kalle Valo
Headers show
Series wil6210 patches | expand

Commit Message

Maya Erez July 24, 2018, 7:44 a.m. UTC 
Currently the driver doesn't support secured boot flow, hence
prevent FW download in case HW is configured for such a flow.

Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/main.c | 5 +++++
 1 file changed, 5 insertions(+)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 7ad22df..1d4ce8e 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1560,6 +1560,11 @@  int wil_reset(struct wil6210_priv *wil, bool load_fw)
 	if (load_fw) {
 		char board_file[WIL_BOARD_FILE_MAX_NAMELEN];
 
+		if  (wil->secured_boot) {
+			wil_err(wil, "secured boot is not supported\n");
+			return -ENOTSUPP;
+		}
+
 		board_file[0] = '\0';
 		wil_get_board_file(wil, board_file, sizeof(board_file));
 		wil_info(wil, "Use firmware <%s> + board <%s>\n",