diff mbox series

[5/5] rt2x00: update TX_SW_CFG2 value

Message ID 1537201975-3032-5-git-send-email-pozega.tomislav@gmail.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series [1/5] rt2x00: set registers based on current band | expand

Commit Message

Tom Psyborg Sept. 17, 2018, 4:32 p.m. UTC 
Use default value of TX_SW_CFG2 register that is in charge
of LNA timings. Works for somewhat higher RX throughput.

Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
---
 drivers/net/wireless/ralink/rt2x00/rt2800lib.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index a5eb17a..c5d0fb1 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -5324,7 +5324,7 @@  static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev)
 	} else if (rt2x00_rt(rt2x00dev, RT6352)) {
 		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
 		rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
-		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+		rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x000C0408);
 		rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
 		rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);
 		rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606);